Rocketfish RF-MAB2 User Manual (English) - Page 6

Turning your headset on or off To turn on your headset: • Press and hold (talk) for about three seconds. The blue LED starts blinking. Note: If you press and hold (talk) for six seconds, your headset goes into pairing mode. For more information see "Pairing your headset" on page 6. To turn off your headset: • Press and hold (talk) for about three seconds. Pairing your headset To pair your headset: 1 With your headset turned off, press and hold (talk) for six seconds. The blue and red LEDs flash rapidly. 2 When your headset is in pairing mode, select RF-MAB2 from the list of discovered devices on the phone. 3 On the phone, enter the password 0000 to pair your headset. Connecting the phone and your headset Connecting from the phone Select RF-MAB2 from the list of discovered devices on the phone. Connecting from your headset When you turn on your headset, it automatically connects to the last device it was connected to. Multi-pairing method Before you can connect your headset to two devices, you must pair to each device individually using the appropriate profiles. For phone conversation, use the HSP or HFP profile. For high quality audio, use the A2DP profile. A profile can only connect one device at a time. For example, you cannot use a phone's MP3 player and a computer's MP3 player at the same time, because both players are connected through the A2DP profile. 6 RF-MAB2 Bluetooth Stereo Headset