Rocketfish RF-PCC132 Quick Setup Guide (English)

Thank you for purchasing this high quality Rocketfish USB to Ethernet

Adapter. Use this adapter to instantly connect to a 10/100 Mbps network

from the USB port on your desktop or laptop computer.

Package contents

•

USB to Ethernet Adapter

• Driver CD

•

Quick Setup Guide

Setting up the adapter

Note

: The driver software must be installed before you connect the adapter.

The adapter does not need to be connected for the software to install.

To install on a Windows PC:

1

Insert the driver CD into the optical drive on your computer. The

software should run automatically. The initial installation screen opens.

Note:

If the software does not run automatically, locate and

double-click

Run.exe

on the driver CD.

2

Click on your operating system, then follow on-screen instructions.

Note:

If the computer has Windows 8, you do not need to install the

driver from the disc. The drivers are installed automatically.

USB to Ethernet Adapter

|

QUICK SETUP GUIDE

RF-PCC132

3

When the installation is complete, click

Finish

to restart your

computer and finish the installation.

4

Connect the USB connector on the adapter to an open USB port on

your desktop or laptop computer.

5

Connect a network cable to the Ethernet port on the adapter.

To install on a Mac:

1

Insert the driver CD into the optical drive of your computer. On the

driver CD, locate and click

AX88772.dmg

.

Click the

DISK IMAGE

icon. The driver setup driver setup dialog box opens.