Rocketfish RF-TVMUC01 Quick Setup Guide (English)
Rocketfish RF-TVMUC01 Manual
 |
View all Rocketfish RF-TVMUC01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Rocketfish RF-TVMUC01 manual content summary:
- Rocketfish RF-TVMUC01 | Quick Setup Guide (English) - Page 1
2010 2:01:50 PM QUICK SETUP GUIDE RF-TVMUC01 Thank you for choosing the Rocket sh RF-TVMUC01. The RF-TVMUC01 TV mount is designed to support a TV weighing up to 35 lbs. (15.9 kg). Package contents A TV bracket (1) A B Under cabinet mount (1) C Plate cover (1) D Cable cover (1) Locking hardware - Rocketfish RF-TVMUC01 | Quick Setup Guide (English) - Page 2
Customer Service or call a quali ed contractor. Rocket sh is not responsible for damage or injury caused by incorrect installation or use. The weight of your TV must not exceed 35 lbs. (15.9 kg). The wall or cabinet bottom must be capable of supporting ve times the weight of the TV and wall mount
-
1 -
2
 |
 |
Tools you will need:
Thank you for choosing the
Rocketfish RF-TVMUC01.
The RF-TVMUC01 TV mount
is designed to support
a TV weighing up to
35 lbs. (15.9 kg).
QUICK SETUP GUIDE
RF-TVMUC01
1: Install the locking screw
Screw the TV bracket locking screw (E)into the TV bracket (A) using the
hex key (F). Do not screw in more than three or four turns.
3: Install the under cabinet mount
Note:
Cabinet thickness must not be less than 7/16 in.
a.
Use the ceiling plate of the under cabinet mount (B) as a template to mark the hole locations.
b.
Drill holes through the bottom of the cabinet using a 1/4” drill bit.
c.
Tap the three 3-prong T-nuts (I) into the holes in the upper surface of the cabinet.
Be careful not to
damage cabinet surface.
d.
Attach the under cabinet mount (B) to the bottom surface of the cabinet using the
three cabinet mounting screws.
Package contents
A
TV bracket (1)
B
Under cabinet mount (1)
C
Plate cover (1)
D
Cable cover (1)
Locking hardware
E
TV bracket screw (1)
F
5/32 in. hex key (1)
M4 bag
G
M4 x 12 mm screws (4)
Mounting hardware
H
Cabinet mount screws (3)
10-24 x 5/8 in. phillips flat head screws
I
3 prong T-nuts (3)
Wire ties
J
8 in. Black Wire Ties (3)
2: Attach the TV bracket
Attach the TV bracket (A) to the back of the TV using the four screws (G).
F
H
I
J
G
E
Locking hardware
Mounting hardware
Wire ties
M4 bag
• Pencil
• Phillips screwdriver
• Hammer
• ¼ in. wood drill bit
• Power drill
E
F
A
A
G
a
b
c
d
10-24 x 5/8 in.
M4 x 12 mm
5/32 in.
B
B
H
I
A
B
C
D
RF-TVMUC01_10-0665 QSG _V3_EN_final press.pdf
1
8/4/2010
2:01:50 PM