Ryobi ACRM003 Operation Manual

Ryobi ACRM003 Manual

Get Ryobi ACRM003 PDF manuals and user guides View all Ryobi ACRM003 manuals
Add to My Manuals
Save this manual to your list of manuals

Ryobi ACRM003 manual content summary:

  • Ryobi ACRM003 | Operation Manual - Page 1
    ACRM001 BAGGING KIT FOR USE WITH RYOBI® ELECTRIC RIDING LAWN MOWER WARNING: To reduce the risk of injury, user must read and understand the operator's manual for their riding lawn mower before using this accessory. Save these instructions. Refer to them frequently and use them to instruct other
  • Ryobi ACRM003 | Operation Manual - Page 2
     Wedge a block of wood between the blade and mower deck to prevent the blade from turning.  Loosen the blade nut by turning it counterclockwise (as viewed from bottom of mower) using a 15 mm wrench or socket (not provided).  Remove the blade nut, spacer, blade insulator, and blade.  Place the
  • Ryobi ACRM003 | Operation Manual - Page 3
    FRAME SHAFTS FRAME COVER COVER OPENINGS HOLE UPPER TUBE Fig. 6 COVER BAGS LOWER TUBE Fig. 9 Fig. 7 LATCH UPPER TUBE TAB LATCH Fig. 8 LATCH Fig. 10 LOWER TUBE Fig. 11
  • Ryobi ACRM003 | Operation Manual - Page 4
    USING THE BAGGING KIT See Figure 12 - 13. WARNING: Added accessories can affect the stability of the mower when operating on slopes. Use additional care when mowing on slopes with the bagging kit installed. BAG FULL INDICATOR WARNING: Be especially careful before and when backing with the bagging
  • Ryobi ACRM003 | Operation Manual - Page 5
    D'ENSACHAGE ACRM001 À UTILISER AVEC LA TONDEUSE ÉLECTRIQUE AUTOPORTÉE RYOBI® AVERTISSEMENT : Pour réduire les risques de blessure, l'utilisateur doit lire et comprendre le manuel d'utilisation de son tondeuse électrique autoportée avant d'employer cet accessoire. Conserver ces instructions. Les
  • Ryobi ACRM003 | Operation Manual - Page 6
    et représenter un risque de blessure grave.  Répéter avec la deuxième lame. INSTALLATION DE L'ENSACHEUSE Voir les figures 5 à 11. n Insérer le support d'ensacheuse dans le trou situé à l'arrière et du côté droit de la tondeuse, comme illustré. n Installer la goupille d'attelage dans le trou situ
  • Ryobi ACRM003 | Operation Manual - Page 7
    ARBRES DU CHÂSSIS CHÂSSIS COUVERCLE OUVERTURE DU COUVERCLE TROU TUBE SUPÉRIEUR Fig. 6 COUVERCLE SACS TUBE INFÉRIEUR Fig. 9 Fig. 7 LOQUET TUBE SUPÉRIEUR LANGUETTE LOQUET Fig. 10 LOQUET Fig. 8 TUBE INFÉRIEUR Fig. 11 n Installer le tube d'ensachage inférieur du côté de la buse de décharge
  • Ryobi ACRM003 | Operation Manual - Page 8
    UTILISATION DE LA TROUSSE D'ENSACHAGE Voir les figures 12 et 13. AVERTISSEMENT : Les accessoires ajoutés peuvent nuire à la stabilité de la tondeuse pendant la coupe effectuée sur des pentes. Effectuer les déplacements de tondeuse sur les pentes avec grande prudence lorsque la trousse d'ensachage
  • Ryobi ACRM003 | Operation Manual - Page 9
    JUEGO PARA EMBOLSAR ACRM001 PARA USAR CON LA PODADORA DE PASTO ELÉCTRICA TIPO TRACTOR RYOBI® ADVERTENCIA: Para reducir el riesgo de lesiones, el usuario debe leer y comprender el manual del operador de la podadora de pasto tipo tractor antes de usar este accesorio. Guarde estas instrucciones. Consú
  • Ryobi ACRM003 | Operation Manual - Page 10
    ADVERTENCIA: Si levanta la podadora para acceder las cuchillas, asegúrese de que la podadora se encuentre asegurada correctamente y el freno de estacionamiento esté colocado antes de proceder. Si no asegura la podadora correctamente puede provocar una caída, lo que podría causar la muerte o posibles
  • Ryobi ACRM003 | Operation Manual - Page 11
    EJES DEL BASTIDOR BASTIDOR CUBIERTA ABERTURAS DE LA CUBIERTA Fig. 6 CUBIERTA BOLSAS ORIFICIO TUBO SUPERIOR TUBO INFERIOR Fig. 9 Fig. 7 PESTILLO TUBO SUPERIOR LENGÜETA PESTILLO Fig. 10 Fig. 8 n Retire la cubierta de la trituradora de la podadora, si está instalada. n I nstale la parte
  • Ryobi ACRM003 | Operation Manual - Page 12
    CÓMO USAR EL JUEGO PARA EMBOLSAR Vea las figuras 12 y 13. ADVERTENCIA: Los accesorios agregados pueden afectar la estabilidad de la podadora si se usa en pendientes. Tenga sumo cuidado cuando pode en pendientes si el juego para embolsar está instalado. INDICADOR DE BOLSAS LLENAS ADVERTENCIA: Tenga
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
CABLE
CUTTING
DECK
HITCH PIN
WASHER
ACRM001 BAGGING KIT
FOR USE WITH RYOBI
®
ELECTRIC RIDING LAWN MOWER
WARNING:
To reduce the risk of injury, user must read and understand
the operator’s manual for their riding lawn mower before
using this accessory. Save these instructions. Refer to them
frequently and use them to instruct other users. If you loan
someone this product, loan them these instructions also.
PACKING LIST
Bagging Blades (2)
Bagger Bracket
Hitch Pin
Bagger Cover
Bags (2)
Upper Bagger Tube
Lower Bagger Tube
INSTALLING THE BAGGING KIT
This kit includes a bagger and special mower blades designed
to be used when bagging. Install the blades first, then install
the bagging kit.
REMOVING THE CUTTING DECK
See Figure 1.
If desired, the cutting deck can be removed from the mower to
make accessing the blades easier when changing.
Make sure direction control switch is in neutral (N) position
and blade engage knob is down.
Stop the motor, remove the start key, and set the parking
brake.
Disconnect the cables that connect the cutting deck to the
mower.
Lower the cutting deck to its lowest position.
Remove the 4 hitch pins and washers that secure the cutting
deck in place.
Slide the deck out from under the mower.
Reverse the process to reattach the cutting deck to the
mower.
INSTALLING BAGGING BLADES
See Figures 2 - 4.
CAUTION:
Only use replacement blade bolts authorized by the
manufacturer of your riding mower. Use of blade bolts not
authorized is hazardous and may damage your riding mower.
Make sure direction control switch is in neutral (N) position
and blade engage knob is down.
Stop the motor, remove the start key, and set the parking
brake.
Raise the height of the cutting deck to its highest position
to allow access to blades.
NOTE:
If necessary, raise the mower by placing on a lift or
using a jack and jack stands, or remove the cutting deck
as described in the previous section to gain access to the
blades.
Fig. 1
Fig. 2
BLOCK OF WOOD
BLADE
WRENCH
WARNING:
If raising the mower to access the blades, make sure the
mower is properly secured and the parking brake is set
before proceeding. Failure to properly secure the mower
could cause it to fall, resulting in possible death or serious
personal injury.