Ryobi BD4600 English Manual

Ryobi BD4600 Manual

Get Ryobi BD4600 PDF manuals and user guides View all Ryobi BD4600 manuals
Add to My Manuals
Save this manual to your list of manuals

Ryobi BD4600 manual content summary:

  • Ryobi BD4600 | English Manual - Page 1
    OPERATOR'S MANUAL Belt/disc sander BD4600 4 x36 Your belt/disc sander has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk
  • Ryobi BD4600 | English Manual - Page 2
    either request service under this warranty or you may exchange any RYOBI® power service, you must also present proof of purchase documentation, which includes the date of purchase (for example, a bill of sale). We will repair any faulty workmanship, and either repair or replace any defective part
  • Ryobi BD4600 | English Manual - Page 3
    that may affect its operation. A guard or other part that is damaged must be properly repaired or replaced by an authorized service center to avoid risk of personal injury.  USE THE RIGHT DIRECTION OF FEED. Feed work into a blade, cutter, or sanding spindle against the direction or rotation of the
  • Ryobi BD4600 | English Manual - Page 4
    .  When servicing use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.  Use only recommended accessories listed in this manual or addendums. Use of accessories that are not listed may cause the risk of personal injury. Instructions for safe use
  • Ryobi BD4600 | English Manual - Page 5
    reduce the risk of injury, user must read and understand operator's manual before using this product. Always wear safety goggles or safety glasses injury. Do not reach across the sanding disc to turn the belt/disc sander ON or OFF. Contact with the sanding disc can result in serious personal injury.
  • Ryobi BD4600 | English Manual - Page 6
    CENTER for repair. When servicing, use only identical replacement parts. WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator's manual. If you do not understand the warnings and instructions in the operator
  • Ryobi BD4600 | English Manual - Page 7
    below to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter's Laboratories (UL) service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded. Repair or replace
  • Ryobi BD4600 | English Manual - Page 8
    removing a wedge from a block so the end (or part of the end) is angled rather than at 90°. Compound Freehand Performing a cut without the workpiece being guided by a fence, miter gauge, or other aids the workpiece is not properly supported. Through Sawing Any cutting operation sanding operation. 
  • Ryobi BD4600 | English Manual - Page 9
    easy belt replacement. SANDING BELT The sanding belt can be adjusted from horizontal to vertical providing different positions for sanding workpieces of different shapes and sizes. SANDING DISC A round sanding disc is located on the side of the belt/disc sander. switch and switch key Your belt/disc
  • Ryobi BD4600 | English Manual - Page 10
    unauthorized and possible hazardous use by children and others. TO TURN THE BELT/DISC SANDER ON:  With the switch key inserted into the switch, lift the switch button to turn ON. TO TURN THE BELT/DISC SANDER OFF:  Press the switch button down to turn OFF. WARNING: In the event of a power failure
  • Ryobi BD4600 | English Manual - Page 11
    loose parts The following items are included with the tool: n Sanding Disc n Disc Guard n Phillips Screws (2) n Socket Head Screws, M8 x 12 (2) n Washers (2) n Miter Gauge n Hex Key n Worktable n Work Support n Operator's Manual (not shown) DISC GUARD MITER GAUGE WORK SUPPORT SANDING DISC socket
  • Ryobi BD4600 | English Manual - Page 12
    REPLACING sanding belt See Figure 7. On the smooth side of the sanding belt, there is a directional arrow. The sanding belt must run in the direction of the arrow. n Unplug the belt/disc sander. n Pull the belt tension lever toward you to release belt tension. n Place the sanding belt over the drive
  • Ryobi BD4600 | English Manual - Page 13
    support over the holes in the side of the tool housing. n Using a hex key, fasten in place with the washers and socket head screws. Mounting belt/DISC sander to workbench See Figure 11. If the belt/disc sander board should be of sufficient size to avoid tipping while belt/disc sander is in use. Any
  • Ryobi BD4600 | English Manual - Page 14
    use this tool for the purpose listed below: n Sanding and finishing plastic, wood, and wood composi- tion materials n Bevel sanding n Horizontal and vertical sanding n Sanding curved pieces WARNING: Applying the workpiece to the right side of the sanding disc could cause the workpiece to kickback
  • Ryobi BD4600 | English Manual - Page 15
    OPERATION HORIZONTAL AND VERTICAL SANDING See Figure 15. The belt/disc sander can sand both vertically and horizontally. Depending on the workpiece, the work support can be used with either the horizontal or vertical sanding operation. n Insert the hex key provided into the holes in the pulley
  • Ryobi BD4600 | English Manual - Page 16
    19. n Plug in belt/disc sander. To check belt tracking: n Turn the switch ON and then immediately turn it OFF. If the belt tends to slide off the idler drum or drive drum, the belt is not tracking properly. To adjust belt tracking: n If the sanding belt moves toward the disc, turn the tracking knob
  • Ryobi BD4600 | English Manual - Page 17
    securely. n Replace the motor cover with the four screws, washers, and rubber feet. hex head set screw SANDING BELT WARNING: To prevent accidental starting that could cause possible serious personal injury, turn off the tool, remove the switch key, and unplug the belt sander before performing any
  • Ryobi BD4600 | English Manual - Page 18
    OPERATOR'S MANUAL Belt/disc sander BD4600 WARNING: Some dust created by power sanding, sawing, grinding, drilling, nearest Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers. • MODEL NO. AND SERIAL NO. The model number
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your belt/disc sander has been engineered and manufactured to our high standard for dependability, ease of operation,
and operator safety. When p
roperly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
OPERATOR’S MANUAL
BELT/DISC SANDER
BD4600
4 x36