Ryobi D42K English Manual

Ryobi D42K Manual

Get Ryobi D42K PDF manuals and user guides View all Ryobi D42K manuals
Add to My Manuals
Save this manual to your list of manuals

Ryobi D42K manual content summary:

  • Ryobi D42K | English Manual - Page 1
    D'UTILISATION MANUAL DEL OPERADOR 3/8 in. DRILL PERCEUSE 10 mm (3/8 po) TALADRO DE 10 mm (3/8 pulg.) D41 Your drill has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble
  • Ryobi D42K | English Manual - Page 2
    the following conditions: 30-DAY EXCHANGE POLICY: During the first 30 days after date of purchase, you may either request service under this warranty or you may exchange any RYOBI® power tool which does not work properly due to defective workmanship or materials by returning the power tool to the
  • Ryobi D42K | English Manual - Page 3
    be drawn into air vents.  Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the power tool the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool,
  • Ryobi D42K | English Manual - Page 4
    servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions these instructions also. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
  • Ryobi D42K | English Manual - Page 5
    minute Wet Conditions Alert Do not expose to rain or use in damp locations. Read The Operator's Manual To reduce the risk of injury, user must read and understand operator's manual before using this product. Eye Protection Safety Alert No Hands Symbol Always wear safety goggles, safety glasses
  • Ryobi D42K | English Manual - Page 6
    to use this product until you read thoroughly and understand completely the operator's manual. If you do not understand the warnings and instructions in the operator's manual, do not use this product. Call Ryobi customer service for assistance. WARNING: The operation of any power tool can result in
  • Ryobi D42K | English Manual - Page 7
    protect the user from shock resulting from a break in the product's internal insulation. Observe all normal safety precautions to avoid electrical shock. NOTE: Servicing of a product with double insulation requires extreme care and knowledge of the system and should be performed only by a qualified
  • Ryobi D42K | English Manual - Page 8
    OF ROTATION SELECTOR (FORWARD/REVERSE/ CENTER LOCK) LOCK-ON BUTTON Fig. 1 KNOW YOUR DRILL See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this
  • Ryobi D42K | English Manual - Page 9
    inspected and satisfactorily operated the product. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST Drill Case Operator's Manual WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this
  • Ryobi D42K | English Manual - Page 10
    held in normal operating position, the direction of rotation selector should be positioned to the left of the switch trigger for drilling. The drilling direction is reversed when the selector is to the right of the switch trigger. Setting the switch trigger in the OFF (center lock) position helps
  • Ryobi D42K | English Manual - Page 11
    in and hold the lock-on button, located on the side of the handle.  Release the switch trigger.  Release the lock-on button and the drill will continue running.  To release the lock, depress and release the switch trig- ger. If the lock-on feature is engaged during use and the
  • Ryobi D42K | English Manual - Page 12
    side pressure to elongate a hole. Let the tool do the work. WARNING: Be prepared for binding at bit breakthrough. When these situations occur, the drill has a tendency to grab and kick in the opposite direction and could cause loss of control when breaking through material. If not prepared, this
  • Ryobi D42K | English Manual - Page 13
    MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses
  • Ryobi D42K | English Manual - Page 14
    remove the hex key. TO RETIGHTEN A LOOSE CHUCK See Figure 9. The chuck may become loose on the spindle and develop a wobble. To tighten:  Unplug the drill.  Open the chuck jaws.  Insert a 5/16 in or larger hex key into the chuck and tighten chuck jaws securely. Tap the hex key sharply with
  • Ryobi D42K | English Manual - Page 15
    NOTES 15 − English
  • Ryobi D42K | English Manual - Page 16
    OPERATOR'S MANUAL / 3/8 in. DRILL MANUEL D'UTILISATION / PERCEUSE 10 mm (3/8 po) MANUAL DEL OPERADOR / TALADRO DE 10 mm (3/8 pulg.) • Parts and Service Prior to requesting service or purchasing replacement parts, please obtain your model and serial number from the product data plate. • MODEL NUMBER
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your drill has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
Votre perceuse été conçue et fabriquée conformément à nos strictes
normes de fiabilité, simplicité d’emploi et sécurité d’utilisation.
Correctement entretenue, elle vous donnera des années de
fonctionnement robuste et sans problème.
AVERTISSEMENT :
Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre le
manuel d’utilisation avant d’employer ce produit.
Merci de votre achat.
Su taladro ha sido diseñada y fabricada de conformidad con las
estrictas normas para brindar fiabilidad, facilidad de uso y seguridad
para el operador. Con el debido cuidado, le brindará muchos años
de sólido y eficiente funcionamiento.
ADVERTENCIA:
Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
Le agradecemos su compra.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
3/8 in. DRILL
PERCEUSE 10 mm (3/8 po)
TALADRO DE 10 mm (3/8 pulg.)
D41