Ryobi D47CK English Manual

Ryobi D47CK Manual

Get Ryobi D47CK PDF manuals and user guides View all Ryobi D47CK manuals
Add to My Manuals
Save this manual to your list of manuals

Ryobi D47CK manual content summary:

  • Ryobi D47CK | English Manual - Page 1
    UTILISATION MANUAL DEL OPERADOR 3/8 in. DRILL PERCEUSE 10 mm (3/8 po) TALADRO DE 10 mm (3/8 pulg.) D46C Your drill has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble
  • Ryobi D47CK | English Manual - Page 2
    Symbols...5-6  Electrical...7  Features...8  Assembly...9  Operation...9-12  Maintenance...13-14  Parts Ordering / Service...Back Page after date of purchase, you may either request service under this warranty or you may exchange any RYOBI® power tool which does not work properly due
  • Ryobi D47CK | English Manual - Page 3
    instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS power cord and grounded way to secure and support the workpiece to a stable tool serviced before using for your model. Accessories that
  • Ryobi D47CK | English Manual - Page 4
    personnel may result in a risk of injury.  When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury. SPECIFIC SAFETY
  • Ryobi D47CK | English Manual - Page 5
    Revolutions, strokes, surface speed, orbits etc., per minute Wet Conditions Alert Do not expose to rain or use in damp locations. Read The Operator's Manual Eye Protection Safety Alert No Hands Symbol No Hands Symbol No Hands Symbol No Hands Symbol Hot Surface To reduce the risk of injury, user
  • Ryobi D47CK | English Manual - Page 6
    to use this product until you read thoroughly and understand completely the operator's manual. If you do not understand the warnings and instructions in the operator's manual, do not use this product. Call Ryobi customer service for assistance. WARNING: The operation of any power tool can result in
  • Ryobi D47CK | English Manual - Page 7
    . Observe all normal safety precautions to avoid electrical shock. NOTE: Servicing of a product with double insulation requires extreme NOTE: AWG = American Wire Gauge WARNING: Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lumber, tools,
  • Ryobi D47CK | English Manual - Page 8
    PRODUCT SPECIFICATIONS Chuck 3/8 in. Switch Variable Speed Reversible (VSR) Clutch 24 Positions No Load Speed 0-1,100 r/min. product requires an understanding of the the drill bit in the chuck jaws. information on the product and in this operator's manual as well as a knowledge of the
  • Ryobi D47CK | English Manual - Page 9
    satisfactorily operated the product. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST Drill Double Ended Bits (2) Operator's Manual Case WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to
  • Ryobi D47CK | English Manual - Page 10
    your other hand. The arrows on the chuck indicate which direction to rotate the chuck body in order to LOCK (tighten) or UNLOCK (release) the drill bit. LOCK (TIGHTEN) CHUCK COLLAR BIT STORAGE Fig. 3 WARNING: Do not hold the chuck body with one hand and use the power of the
  • Ryobi D47CK | English Manual - Page 11
    tighten or loosen the chuck jaws. REMOVING BITS See Figure 5.  Unplug the drill.  Open the chuck jaws. Note: Rotate the chuck body in the direction Release the switch trigger.  Release the lock-on button and the drill will continue running.  To release the lock, depress and release the switch trigger
  • Ryobi D47CK | English Manual - Page 12
    side pressure to elongate a hole. Let the tool do the work. WARNING: Be prepared for binding at bit breakthrough. When these situations occur, the drill has a tendency to grab and kick in the opposite direction and could cause loss of control when breaking through material. If not prepared, this
  • Ryobi D47CK | English Manual - Page 13
    MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may Chemicals can damage, weaken or destroy plastic which may result in serious personal injury. Electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to
  • Ryobi D47CK | English Manual - Page 14
    and develop a wobble. Also, the chuck screw may become loose, causing the chuck jaws to bind and prevent them from closing. To tighten:  Unplug the drill.  Open the chuck jaws.  Insert a hex key into the chuck and tighten chuck jaws securely. Tap the hex key sharply with a mallet in a clockwise
  • Ryobi D47CK | English Manual - Page 15
    NOTES 15 − English
  • Ryobi D47CK | English Manual - Page 16
    OPERATOR'S MANUAL / 3/8 in. DRILL MANUEL D'UTILISATION / PERCEUSE 10 mm (3/8 po) MANUAL DEL OPERADOR / TALADRO DE 10 mm (3/8 pulg.) • Parts and Service Prior to requesting service or purchasing replacement parts, please obtain your model and serial number from the product data plate. • MODEL NUMBER
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your drill has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
Votre perceuse été conçue et fabriquée conformément à nos strictes
normes de fiabilité, simplicité d’emploi et sécurité d’utilisation.
Correctement entretenue, elle vous donnera des années de
fonctionnement robuste et sans problème.
AVERTISSEMENT :
Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre le
manuel d’utilisation avant d’employer ce produit.
Merci de votre achat.
Su taladro ha sido diseñada y fabricada de conformidad con las
estrictas normas para brindar fiabilidad, facilidad de uso y seguridad
para el operador. Con el debido cuidado, le brindará muchos años
de sólido y eficiente funcionamiento.
ADVERTENCIA:
Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
Le agradecemos su compra.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
3/8 in. DRILL
PERCEUSE 10 mm (3/8 po)
TALADRO DE 10 mm (3/8 pulg.)
D46C