Ryobi ES5500 Quick Start Guide

Ryobi ES5500 Manual

Ryobi ES5500 manual content summary:

  • Ryobi ES5500 | Quick Start Guide - Page 1
    Ryobi™ Phone Works™App from the App Store or Google Play Store WARNING: This Quick Start Guide is not a substitute for reading the operator's manual included with the app. To reduce the risk of injury, user must read and understand operator's manual before using this product. ES5500 Stud Finder
  • Ryobi ES5500 | Quick Start Guide - Page 2
    manual del operador de este producto antes de utilizarlo. ES5500 Stud Finder (détecteur de montants) ACTIVATION DU DISPOSITIF 1. Sélectionnez l'icône du dispositif Stud Finder (détecteur de montants) et sélectionnez Activate Device (activer le dispositif). 2. Sélectionnez votre authentifiant Ryobi
  • 1
  • 2

ES5500 Stud Finder
ACTIVATING DEVICE
1. Select the
Stud Finder
device icon and choose
Activate Device
.
2. Select your current
Ryobi Nation
login credentials, or if new user,
Create
Account
.
3. Enter the 14-digit serial number and purchase date.
GETTING STARTED
1. Remove red tab in the battery compartment to activate the batteries.
2. With the App open to the main screen, plug the device into the headphone jack
on your smart phone. With device connected, be sure the volume on your phone
is turned all the way up.
3. The device will auto-recognize and open the
Stud Finder.
NOTE:
If the device is not found, disconnect the device, restart the App, and
reconnect the
Stud Finder.
NOTE:
In order for the app to work properly, select
Ok
when asked for access
to the microphone, camera and location. These settings can be changed in your
phone’s dedicated settings.
4. Hold the device by the two finger pads, keeping your hand away from the inter-
nal sensor.
5. To
Calibrate
, hold the Stud Finder against the wall where there is no stud and
press
Calibrate
. Wait 15 seconds for the on-screen sequence to complete.
6. To
Find
a stud, scan slowly across the wall. The arrows will begin pointing to-
ward a stud location when you get close to a stud.
7. Double check stud location by calibrating and scanning again.
8. The full Operator’s Manual is available in
Settings
.
991000336
12-4-14 (REV:01)
WARNING:
This Quick Start Guide is not a substitute for reading the operator’s manual included with the
app. To reduce the risk of injury, user must read and understand operator’s manual before
using this product.
Thank you for purchasing Ryobi
Phone Works
If you need assistance
DO NOT RETURN TO THE STORE
Please contact us at
1-877-578-6736
TM
Before getting started, please visit
www.ryobitools.com/phoneworks
There you can find How-To Videos, Operator’s Manuals and
the most current list of compatible phones.
Download
Ryobi
Phone Works
App
from the
App Store
or
Google Play Store