Ryobi P230 English Manual

Ryobi P230 Manual

Get Ryobi P230 PDF manuals and user guides View all Ryobi P230 manuals
Add to My Manuals
Save this manual to your list of manuals

Ryobi P230 manual content summary:

  • Ryobi P230 | English Manual - Page 1
    OPERATOR'S MANUAL 18 VOLT IMPACT DRIVER P230 BATTERIES AND CHARGERS SOLD SEPARATELY Your impact driver has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free
  • Ryobi P230 | English Manual - Page 2
    Introduction ...2 �n General Safety Rules ...3-4 �n Specific Safety Rules...4 n Safety Rules for Charger ...5 �n Symbols...6-7 �n Features...8 �n Assembly ...9 �n Operation...9-13 �n Maintenance ...14 �n Parts Ordering / Service ...16 INTRODUCTION This tool has many features for making its use more
  • Ryobi P230 | English Manual - Page 3
    a risk of fire. n Use battery only with charger listed. MODEL BATTERY PACK (P100) CHARGER (P110) P230 130255004 1423701, 140237021 or 140237023 n Do not abuse the cord. Never use the cord to carry the charger. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords
  • Ryobi P230 | English Manual - Page 4
    servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions hazards when not using your battery tool or when changing accessories. Following this rule will reduce
  • Ryobi P230 | English Manual - Page 5
    may result in electric shock, fire and/or serious personal injury. n Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, battery, and product using battery to prevent misuse of the products and possible injury or damage. CAUTION: To reduce
  • Ryobi P230 | English Manual - Page 6
    ., per minute Wet Conditions Alert Do not expose to rain or use in damp locations. Read The Operator's Manual To reduce the risk of injury, user must read and understand operator's manual before using this product. Eye Protection Safety Alert No Hands Symbol No Hands Symbol No Hands Symbol No
  • Ryobi P230 | English Manual - Page 7
    servicing, use only identical replacement parts. WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator's manual. Save this operator's manual and review frequently for continuing safe operation and instructing
  • Ryobi P230 | English Manual - Page 8
    No Load Speed ...0-2400/min. Charger Input ...120 V, 60 Hz, AC only Charge Rate ...1 Hour Torque...Minimum 800 in.lb Blows Per Minute ...3000/BPM BUILT-IN COUPLER SWITCH TRIGGER FORWARD/ REVERSE SELECTOR WITH CENTER LOCK BIT STORAGE Fig. 1 KNOW YOUR IMPACT DRIVER See Figure 1. Before attempting
  • Ryobi P230 | English Manual - Page 9
    525-2579 for assistance. PACKING LIST 1/4 in. Impact Driver Standard Bit (1) Adaptor Bit (1) Lanyard (not included in combo) Operator's Manual Warranty Registration Card WARNING: If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in
  • Ryobi P230 | English Manual - Page 10
    will come on. NOTE: If the charger does not charge the battery pack under normal circumstances, return both the battery pack and charger to your nearest Ryobi Authorized Service Center for electrical check. n Charge the battery pack only with a recommended charger. n Make sure the power supply is
  • Ryobi P230 | English Manual - Page 11
    come on instead of the red LED. After 30 minutes, reinsert the battery pack in the charger. If the green LED continues to remain on, return battery pack to your nearest Ryobi Authorized Service Center for checking or replacing. NOTE: This situation only occurs when continuous use of the tool causes
  • Ryobi P230 | English Manual - Page 12
    reversed when the selector is to the right of the switch. When the selector is in center position, the switch trigger is locked. VARIABLE SPEED See Figure 4. This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount
  • Ryobi P230 | English Manual - Page 13
    hold in position. n Insert bit straight into coupler. n Slide the coupler back slowly and release. REMOVING BITS See Figure 6. n Lock switch trigger or the drill by placing the direction of rotation selector in center position. n Slide the coupler forward and hold in position. n Pull bit straight
  • Ryobi P230 | English Manual - Page 14
    which may result in serious personal injury. Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at a Ryobi Authorized Service Center. BATTERIES The battery pack for this tool is equipped with nickel-cadmium rechargeable
  • Ryobi P230 | English Manual - Page 15
    NOTES 15
  • Ryobi P230 | English Manual - Page 16
    OPERATOR'S MANUAL 18 VOLT IMPACT DRIVER P230 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
OPERATOR’S MANUAL
18 VOLT IMPACT DRIVER
P230
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your impact driver has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for buying a Ryobi product.
BATTERIES AND CHARGERS
SOLD SEPARATELY