Ryobi P400 English Manual
Ryobi P400 Manual
 |
View all Ryobi P400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Ryobi P400 manual content summary:
- Ryobi P400 | English Manual - Page 1
MANUAL 18 VOLT CORNER CAT™ FINISH SANDER P400 BATTERIES AND CHARGERS SOLD SEPARATELY Your Corner Cat™ Finish Sander has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble - Ryobi P400 | English Manual - Page 2
in workmanship or materials in your RYOBI® power tool for a period of two years from the date of purchase. With the exception of batteries, power tool accessories are warranted for ninety (90) days. Batteries are warranted for two years. HOW TO GET SERVICE: Just return the power tool, properly - Ryobi P400 | English Manual - Page 3
easier to control. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. Use only accessories that are recommended - Ryobi P400 | English Manual - Page 4
servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions hazards when not using your battery tool or when changing accessories. Following this rule will reduce - Ryobi P400 | English Manual - Page 5
instructions listed below, may result in electric shock, fire and/or serious personal injury. Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, battery, and product using battery hazard. Replace damaged or moving parts or otherwise service - Ryobi P400 | English Manual - Page 6
Revolutions, strokes, surface speed, orbits etc., per minute Wet Conditions Alert Do not expose to rain or use in damp locations. Read The Operator's Manual Eye Protection Safety Alert No Hands Symbol No Hands Symbol No Hands Symbol No Hands Symbol Hot Surface To reduce the risk of injury, user - Ryobi P400 | English Manual - Page 7
servicing, use only identical replacement parts. WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator's manual. Save this operator's manual and review frequently for continuing safe operation and instructing - Ryobi P400 | English Manual - Page 8
FEATURES PRODUCT SPECIFICATIONS Motor ...18 Volt DC Orbits Per Minute ...11,000 OPM Charger Input ...120 V, 60 Hz, AC only Charge Rate ...1 hour HEAVY-DUTY SCRUBBING PAD (RED) LIGHT SCRUBBING PAD (WHITE) POLISHING PAD (GRAY) SANDING SHEET ON/OFF SWITCH HOOK-AND-LOOP PAD Fig. 1 8 - Ryobi P400 | English Manual - Page 9
. PACKING LIST Corner Cat™ Finish Sander 60-grit Sanding Sheet (1) 120-grit Sanding Sheet (1) 240-grit Sanding Sheet (1) Heavy-duty Scrubbing Pad (Red) (1) Light Scrubbing Pad (White) (1) Polishing Pad (Gray) (1) Lanyard (not included in combo) Operator's Manual WARNING: If any parts are missing - Ryobi P400 | English Manual - Page 10
and should be replaced. After normal usage, a minimum of 1 hour of charging time is required to fully recharge battery pack. The battery pack will become slightly warm to the touch while charging. This is normal and does not indicate a problem. Do not place the charger and battery pack in an - Ryobi P400 | English Manual - Page 11
come on instead of the red LED. After 30 minutes, reinsert the battery pack in the charger. If the green LED continues to remain on, return battery pack to your nearest Ryobi Authorized Service Center for checking or replacing. NOTE: This situation only occurs when continuous use of the tool causes - Ryobi P400 | English Manual - Page 12
can be reused for the life of the sanding abrasive. It is recommended that you keep the sanding sheet backing pad clean to provide for best adhesion. Clean occasionally by brushing lightly with a small brush. TURNING THE SANDER ON (I) / OFF (O) See Figure 5. Install the battery pack. To turn ON - Ryobi P400 | English Manual - Page 13
workpiece. Remove your hand from vent area, remove sanding sheet, then with your hand removed from vent area, turn sander on and run it free without a load to cool motor. For detail sanding such as corners and crevices, use the tip of the sanding pad with small back and forth motions. WORKPIECE - Ryobi P400 | English Manual - Page 14
the desired sheet by pressing the sheet or pad onto the base of the sander. ROTATING THE SANDING SHEETS See Figure 9. The majority of wear in a precision sanding application occurs at the tip of the sanding sheet. The unique Tri-Flex design of the sanding sheets allows you to detach and rotate the - Ryobi P400 | English Manual - Page 15
. Only the parts listed in this manual are intended to be repaired or replaced by the customer. All other parts should be replaced at a Ryobi Authorized Service Center. CLEANING THE SCRUBBING PADS To ensure longer life and optimum performance, periodically clean all sanding residue and foreign - Ryobi P400 | English Manual - Page 16
OPERATOR'S MANUAL 18 VOLT CORNER CAT™ FINISH SANDER P400 WARNING: Some dust created by power sanding, sawing, grinding, drilling, a complete list of Authorized Service Centers. • MODEL NO. AND SERIAL NO. The model number of this tool will be found on a plate attached to the motor housing. Please
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
OPERATOR’S MANUAL
18 VOLT CORNER CAT™
FINISH SANDER
P400
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your Corner Cat™ Finish Sander has been engineered and manufactured to our high standard for dependability, ease of
operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for your purchase.
BATTERIES AND CHARGERS
SOLD SEPARATELY