Ryobi P410 English Manual

Ryobi P410 Manual

Get Ryobi P410 PDF manuals and user guides View all Ryobi P410 manuals
Add to My Manuals
Save this manual to your list of manuals

Ryobi P410 manual content summary:

  • Ryobi P410 | English Manual - Page 1
    OPERATOR'S MANUAL 18 VOLT RANDOM ORBIT SANDER P410 BATTERIES AND CHARGERS SOLD SEPARATELY Your sander has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free
  • Ryobi P410 | English Manual - Page 2
    in workmanship or materials in your RYOBI® power tool for a period of two years from the date of purchase. With the exception of batteries, power tool accessories are warranted for ninety (90) days. Batteries are warranted for two years. HOW TO GET SERVICE: Just return the power tool, properly
  • Ryobi P410 | English Manual - Page 3
    on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.  Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures
  • Ryobi P410 | English Manual - Page 4
    the battery may cause irritation or burns. SERVICE  Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. WARNING! To reduce the risk of injury, user must read instruction manual.  When
  • Ryobi P410 | English Manual - Page 5
    battery charger, read all instructions and cautionary markings in this manual, on battery charger, battery, and product using battery in contact with sharp edges or moving parts or otherwise subjected to damage or stress. it to an authorized serviceman when service or repair is required. Incorrect
  • Ryobi P410 | English Manual - Page 6
    speed, orbits etc., per minute Wet Conditions Alert Do not expose to rain or use in damp locations. Read The Operator's Manual Eye Symbol Hot Surface To reduce the risk of injury, user must read and understand operator's manual before using this product. Always wear safety goggles or safety
  • Ryobi P410 | English Manual - Page 7
    parts. WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator's manual. If you do not understand the warnings and instructions in the operator's manual, do not use this product. Call Ryobi customer service
  • Ryobi P410 | English Manual - Page 8
    FEATURES PRODUCT SPECIFICATIONS Orbit Diameter 1/16 in. Motor 18 Volt DC No Load Speed 10,000 r/min. (RPM) Charger Input 120 V, 60 Hz, AC only Charge Rate 1 hour HOOK-AND-LOOP SANDING DISCS ON ( I ) / OFF ( O ) SWITCH Fig. 1 8
  • Ryobi P410 | English Manual - Page 9
    , please call 1-800-525-2579 for assistance. PACKING LIST Sander Sanding Disc, 60-grit Sanding Disc, 120-grit Sanding Disc, 240-grit Operator's Manual WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could result in
  • Ryobi P410 | English Manual - Page 10
    and sanding steel surfaces CAUTION: If at any point during the charging process none of the LEDs are lit, remove the battery pack from the charger to avoid damaging the product. DO NOT insert another battery. Return the charger and battery to your nearest service center for service or replacement
  • Ryobi P410 | English Manual - Page 11
    pack and charger to your nearest Authorized Service Center for electrical check. WARNING: Battery products are always in operating condition. Therefore, the switch should always be locked when not in use or carrying at your side. TURNING THE SANDER ON ( I )/OFF ( O ) See Figure 3.  Install the
  • Ryobi P410 | English Manual - Page 12
    until surface is uniform. ATTACHING HOOK-AND-LOOP SANDING DISC See Figure 5. To attach hook-and-loop sanding disc:  Remove battery pack from sander.  Align the holes in the sanding disc with the holes in the hook-and-loop backing pad.  Press the sanding disc against the backing pad as firmly as
  • Ryobi P410 | English Manual - Page 13
    one spot too long as the sander's rapid action may remove too much material, making the surface uneven. Extended periods of sanding may overheat the motor. If this occurs, turn the sander off and wait until the sanding sheet comes to a complete stop. Remove sander from workpiece. Remove sanding disc
  • Ryobi P410 | English Manual - Page 14
    intended to be repaired or replaced by the customer. All other parts should be replaced at an Authorized Service Center. BATTERIES The battery pack for this product is equipped with nickelcadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are
  • Ryobi P410 | English Manual - Page 15
    NOTES 15
  • Ryobi P410 | English Manual - Page 16
    MANUAL 18 VOLT RANDOM ORBIT SANDER P410 WARNING: Some dust created by power sanding PARTS When ordering repair parts, always give the following information: • MODEL NUMBER P410 • SERIAL NUMBER Ryobi® is a registered trademark of Ryobi Limited used under license. 987000-005 8-25-06 (REV:00) ONE
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
OPERATOR’S MANUAL
18 VOLT RANDOM ORBIT SANDER
P410
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your sander has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
BATTERIES AND CHARGERS
SOLD SEPARATELY