Ryobi P430 English Manual

Ryobi P430 Manual

Get Ryobi P430 PDF manuals and user guides View all Ryobi P430 manuals
Add to My Manuals
Save this manual to your list of manuals

Ryobi P430 manual content summary:

  • Ryobi P430 | English Manual - Page 1
    OPERATOR'S MANUAL 6 in., 18 VOLT BUFFER/POLISHER P430 BATTERIES AND CHARGERS SOLD SEPARATELY Your buffer/polisher has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-
  • Ryobi P430 | English Manual - Page 2
    date of purchase, you may either request service under this warranty or you may exchange any RYOBI® power tool which does not work properly sale). We will repair any faulty workmanship, and either repair or replace any defective part, at our option. We will do so without any charge to you. We will
  • Ryobi P430 | English Manual - Page 3
    only with charger listed. MODEL P430 BATTERY PACK (P100) CHARGER ( a key left attached to a rotating part of the power tool may result in Do not use on a ladder or unstable support. Stable footing on a solid surface enables better with the power tool or these instructions to operate the power tool.
  • Ryobi P430 | English Manual - Page 4
    the risk of injury, user must read instruction manual.  When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury
  • Ryobi P430 | English Manual - Page 5
    charger, read all instructions and cautionary markings in this manual, on battery charger, over, come in contact with sharp edges or moving parts or otherwise subjected to damage or stress. This will . Take it to an authorized serviceman when service or repair is required. Incorrect reassembly may
  • Ryobi P430 | English Manual - Page 6
    Revolutions, strokes, surface speed, orbits etc., per minute Wet Conditions Alert Do not expose to rain or use in damp locations. Read The Operator's Manual Eye Protection Safety Alert No Hands Symbol No Hands Symbol No Hands Symbol No Hands Symbol Hot Surface To reduce the risk of injury, user
  • Ryobi P430 | English Manual - Page 7
    parts. WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator's manual. If you do not understand the warnings and instructions in the operator's manual, do not use this product. Call Ryobi customer service
  • Ryobi P430 | English Manual - Page 8
    , AC only Charge Rate 1 hour HANDLE APPLICATION BONNET ROTATING BASE BUFFING/POLISHING BONNET Fig. 1 KNOW YOUR BUFFER/POLISHER See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project
  • Ryobi P430 | English Manual - Page 9
    Buffer/Polisher Buffing/Polishing Bonnet Application Bonnet Operator's Manual WARNING: If any parts are damaged or missing do not operate this tool until the parts nearest service center for service or Polishing and buffing cars, condition to prevent possible problems. Therefore, you should charge
  • Ryobi P430 | English Manual - Page 10
    to the touch while charging. This is normal and does not indicate a problem.  Do not place the charger and battery pack in an area of your nearest Authorized Service Center for electrical check. STARTING/STOPPING THE BUFFER/POLISHER See Figures 3.  To start the buffer/polisher, place the power
  • Ryobi P430 | English Manual - Page 11
    type of abrasive cleanser as it may damage or scratch the surface. PULL POLISHING BONNET EDGES OVER PAD TO INSTALL Fig. 4 WARNING: The drawstring must be tucked securely inside the bonnet before turning the buffer/polisher on. Failure to do so could result in the drawstring being caught between
  • Ryobi P430 | English Manual - Page 12
    . Let the orbital action of the pad and bonnet do the work. Once flat surfaces have been covered, polish curved surfaces such as car doors and quarter panels. Use small circular motions. After applying polish to the entire surface, turn buffer/polisher off. Wait until the pad stops rotating before
  • Ryobi P430 | English Manual - Page 13
    See Figure 9. Remove the battery pack from the buffer/polisher and remove the application bonnet by loosening the drawstring and slipping the bonnet off the pad. Replace with buffing/ polishing bonnet, attaching it the same way as the application bonnet. Buff the surface in the same order as it
  • Ryobi P430 | English Manual - Page 14
    parts should be replaced at an Authorized Service Center. APPLICATION AND BUFFING/POLISHING BONNETS Both the application and buffing/polishing bonnets doing. The batteries in this tool have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out
  • Ryobi P430 | English Manual - Page 15
    NOTES 15
  • Ryobi P430 | English Manual - Page 16
    OPERATOR'S MANUAL 6 in. 18 VOLT BUFFER/POLISHER P430 WARNING: Some dust created by power sanding, PARTS When ordering repair parts, always give the following information: • MODEL NUMBER P430 • SERIAL NUMBER Ryobi® is a registered trademark of Ryobi Limited used under license. 983000-967 05-11
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
OPERATOR’S MANUAL
6
in., 18 VOLT BUFFER/POLISHER
P430
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your buffer/polisher has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly c
ared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator
’
s manual before using
this product.
Thank you for your purchase.
BATTERIES AND CHARGERS
SOLD SEPARATELY