Ryobi R1631K Operation Manual

Ryobi R1631K Manual

Get Ryobi R1631K PDF manuals and user guides View all Ryobi R1631K manuals
Add to My Manuals
Save this manual to your list of manuals

Ryobi R1631K manual content summary:

  • Ryobi R1631K | Operation Manual - Page 1
    OPERATOR'S MANUAL FIXED BASE ROUTER DOUBLE INSULATED R163 Your router has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk
  • Ryobi R1631K | Operation Manual - Page 2
    -18  Adjustments...18  Maintenance...19  Accessories...19  Parts Ordering / Service...20 INTRODUCTION This tool has many features for days after date of purchase, you may either request service under this warranty or you may exchange any RYOBI® power tool which does not work properly due
  • Ryobi R1631K | Operation Manual - Page 3
    vents.  Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control for misalignment or binding of moving parts, breakage of parts and any other condition that may power tool, accessories and tool bits etc., in accordance with these instructions and in the
  • Ryobi R1631K | Operation Manual - Page 4
    the risk of injury, user must read instruction manual.  When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury
  • Ryobi R1631K | Operation Manual - Page 5
    Revolutions, strokes, surface speed, orbits etc., per minute Wet Conditions Alert Do not expose to rain or use in damp locations. Read The Operator's Manual Eye Protection Safety Alert No Hands Symbol No Hands Symbol No Hands Symbol No Hands Symbol Hot Surface To reduce the risk of injury, user
  • Ryobi R1631K | Operation Manual - Page 6
    parts. WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator's manual. If you do not understand the warnings and instructions in the operator's manual, do not use this product. Call Ryobi customer service
  • Ryobi R1631K | Operation Manual - Page 7
    of the system and should be performed only by a qualified service technician. For service, we suggest you return the tool to your nearest authorized service center for repair. Always use original factory replacement parts when servicing. ELECTRICAL CONNECTION This tool has a precision-built electric
  • Ryobi R1631K | Operation Manual - Page 8
    FEATURES PRODUCT SPECIFICATIONS Depth of Cut 2 in. Collet 1/4 in. Peak Horsepower 1.5 HP No Load Speed 25,000 r/min (RPM) Input 120 V, 60 Hz, AC only, 8.5 A ON/OFF SWITCH Lock lever spindle lock CHIP SHIELD depth adjustment knob lED worklightS quick release button handle  Fig. 1
  • Ryobi R1631K | Operation Manual - Page 9
    LIST R163 Router Bag Wrench Operator's Manual WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING: Do not attempt to modify this tool or create accessories not recommended
  • Ryobi R1631K | Operation Manual - Page 10
    n Cabinet making, routing counter tops, and finishing work in wood and wood products REMOVING/INSTALLING ROUTER BASE See Figure 2. To remove the base: n Unplug the router. n Place the router upside down with the Ryobi label away from you. n Loosen the lock lever on the base. Note: It should not
  • Ryobi R1631K | Operation Manual - Page 11
    use bits which are larger in diameter than the opening in the router subbase. These situations could cause possible loss of control or create . Fig. 4 LED WORKLIGHT See Figure 4. The two LED worklights on the base of the router motor will come on when the ON/OFF switch is in the ON ( I ) position.
  • Ryobi R1631K | Operation Manual - Page 12
    of the cut can be read on the depth adjustment knob. Each mark on the scale indicates a 1/128 in. change in depth setting. n Unplug the router. n Loosen the lock lever. n Turn the depth adjustment knob counterclockwise to move the collet down or clockwise to move the collet up. Note: It should
  • Ryobi R1631K | Operation Manual - Page 13
    practices and offer proper guarding for the bit. Use router tables that are UL classified and identified suitable for use with the specific router model. Failure to comply can result in an accident causing possible injury. WARNING: Only use router tables with proper guarding for the bit and with on
  • Ryobi R1631K | Operation Manual - Page 14
    When routing straight cuts across a workpiece, clamp a straight edge to the workpiece to use as a guide. NOTE: Edge guides for the router are also available. See Accessories. Position the straight edge parallel to the line of cut and offset the distance between the cutting edge of the bit and the
  • Ryobi R1631K | Operation Manual - Page 15
    with the desired depth of cut (as adjusted by router depth setting) are such that only the top part of the edge is to be shaped (leaving will alter the shape of the finished edge. WORK ROUTER Fig. 10 TOP EDGE SHAPING PILOT ROUTER WORK GUIDE PILOT WHOLE EDGE SHAPING Fig. 11 NOTE: Any of
  • Ryobi R1631K | Operation Manual - Page 16
    .  Check the progress of each cut. Too slow feeding can cause the router to take off in a wrong direction from the intended line of cut. Force proper feed rate may be determined by the speed at which you can travel the router along the guide line. If the bit is a large one, the cut is deep, or
  • Ryobi R1631K | Operation Manual - Page 17
    , the bit must take bigger bites as it revolves. Bigger bites mean bigger chips and a rougher finish. Also, because bigger bites require more power, the router motor may become overloaded. Under extreme force-feeding conditions, the relative RPM of the bit can become so slow-and the bites it has to
  • Ryobi R1631K | Operation Manual - Page 18
    enough bit is not likely to break, but attempting a cut that is too deep may result in a rough cut, and it may be difficult to guide and control the bit as desired. It is recommended that you do not exceed 1/8 in. depth of cut in a single pass, regardless of the bit
  • Ryobi R1631K | Operation Manual - Page 19
    Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage ACCESSORIES Look for these accessories at the service center:  Edge Guide...6090080-1  25 pc. Carbide Router Bit Kit...A25RS25  12 pc. Carbide Router Bit Kit...A25RS12  8 pc. Starter Carbide Router
  • Ryobi R1631K | Operation Manual - Page 20
    OPERATOR'S MANUAL FIXED BASE ROUTER DOUBLE INSULATED R163 WARNING: Some dust created by power • HOW TO ORDER REPAIR PARTS When ordering repair parts, always give the following information: • MODEL NUMBER R163 • SERIAL NUMBER Ryobi® is a registered trademark of Ryobi Limited used under license.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your router has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for your purchase.
OPERATOR’S MANUAL
FIXED BASE ROUTER
DOUBLE INSULATED
R163