Ryobi RS290 English Manual

Ryobi RS290 Manual

Get Ryobi RS290 PDF manuals and user guides View all Ryobi RS290 manuals
Add to My Manuals
Save this manual to your list of manuals

Ryobi RS290 manual content summary:

  • Ryobi RS290 | English Manual - Page 1
    OPERATOR'S MANUAL RANDOM ORBIT SANDER Double Insulated RS290 Your sander has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the
  • Ryobi RS290 | English Manual - Page 2
    Maintenance...13  Parts Ordering / Service...Back Page INTRODUCTION This RYOBI® power tool which does not work properly due to defective workmanship or materials by returning the power tool to the dealer from which it was purchased. To receive a replacement power tool or requested warranty service
  • Ryobi RS290 | English Manual - Page 3
    of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Save These Instructions Work Area SAFETY moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.  If devices are provided for the connection of dust
  • Ryobi RS290 | English Manual - Page 4
    the risk of injury, user must read instruction manual.  When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury
  • Ryobi RS290 | English Manual - Page 5
    Class II Construction Double-insulated construction .../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute Wet Conditions Alert Do not expose to rain or use in damp locations. Read The Operator's Manual Eye Protection To reduce the risk of injury, user must read and
  • Ryobi RS290 | English Manual - Page 6
    CENTER for repair. When servicing, use only identical replacement parts. WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator's manual. If you do not understand the warnings and instructions in the operator
  • Ryobi RS290 | English Manual - Page 7
    service technician. For service, we suggest you return the product to your nearest authorized service center for repair. Always use original factory replacement parts when servicing required in an extension cord. Only round jacketed cords listed by Underwriter's Laboratories (UL) should be used. When
  • Ryobi RS290 | English Manual - Page 8
    FEATURES PRODUCT SPECIFICATIONS Sanding Disc Diameter 5 in. Motion Random Orbit Orbit Diameter 3/32 in. No Load Speed 12,500/min (RPM) Input 120 V, 60 Hz, AC only, 2.6 Amps Net Weight 3-1/2 lbs. DUST BAG ASSEMBLY on/ off Slide Switch BACKING PAD Fig. 1 KNOW YOUR SANDER See Figure 1. The
  • Ryobi RS290 | English Manual - Page 9
    or missing, please call 1-800-525-2579 for assistance. PACKING LIST Random Orbit Sander Sandpaper (3 discs) Dust Bag Operator's Manual WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal
  • Ryobi RS290 | English Manual - Page 10
    backing pad occasionally by brushing it lightly with a small brush for best adhesion. TURNING THE SANDER ON/OFF See Figure 3.  To turn the sander on: Slide the switch to the left ( l ).  To turn the sander off: Slide the switch to the right ( O ). DUSTLESS SANDING WARNING: Do not use the dust bag
  • Ryobi RS290 | English Manual - Page 11
    the sander.  Remove the dust bag assembly from the sander.  Shake out the dust.  For a more thorough cleaning of the dust bag, remove dust bag from the frame and shake out dust.  Replace the dust bag assembly on the sander. ATTACHING THE SANDER TO A VACUUM See Figure 6. When sanding for an
  • Ryobi RS290 | English Manual - Page 12
    workpiece.  Make successive passes in parallel lines, circles, or crosswise movements. NOTE: The front edge of the sander allows for flush sanding.  Turn the sander off and wait until the sanding disc comes to a complete stop before removing it from the workpiece. WARNING: Before connecting the
  • Ryobi RS290 | English Manual - Page 13
    : When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask. GENERAL
  • Ryobi RS290 | English Manual - Page 14
    OPERATOR'S MANUAL RANDOM ORBIT SANDER Double Insulated RS290 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
OPERATOR’S MANUAL
RANDOM ORBIT SANDER
DOUBLE INSULATED
RS290
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your sander has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.