Ryobi RY40440 Operation Manual

Ryobi RY40440 Manual

Ryobi RY40440 manual content summary:

  • Ryobi RY40440 | Operation Manual - Page 1
    products only. Refer to the Operator's Manual provided with product. Always mention the model ! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in °F (130°C) may cause explosion.  Have servicing performed by a qualified repair person using only
  • Ryobi RY40440 | Operation Manual - Page 2
    shipped in a low charge condition to prevent possible problems. Therefore, you should charge prior to first use Service Center for electrical check.  Charge the battery pack only with the recommended charger.  Refer to charger operator's manual for charging ­instructions maximum trouble-free life
  • Ryobi RY40440 | Operation Manual - Page 3
    é d'effectuer la réparation en utilisant des pièces de rechange identiques. Ceci assurera la bonne sécurité du produit réparé.  Conserver ces instructions. Les consulter fréquemment et les utiliser pour instruire les autres utilisateurs éventuels. Si cet outil est prêté, il doit être accompagné de
  • Ryobi RY40440 | Operation Manual - Page 4
    la portée des enfants. Le non-respect de ces mises en garde peut résulter en un incendie et / ou des blessures graves. CONSERVER CES INSTRUCTIONS Ce produit est couvert par une garantie limitée de trois (3) ans. Veuillez visiter notre site internet au www.ryobitools.com pour obtenir tous les détails
  • Ryobi RY40440 | Operation Manual - Page 5
    RYOBI, por favor visita: http://register.ryobitools.com Use el paquete de baterías 40 V solamente con productos inalámbricos RYOBI. Consulte el manual del operador suministrado con el producto. Al comunicarse con nosotros en relación con el paquete de baterías, siempre mencione el número del modelo
  • Ryobi RY40440 | Operation Manual - Page 6
    los revisen eléctricamente.  Sólo cargue el paquete de baterías con un cargador recomendado.  Para obtener instrucciones específicas de carga, lea el manual del operador que se incluye con el cargador. CÓMO CARGAR EL PAQUETE DE BATERÍAS CUANDO ESTÁ CALIENTE Cuando se utiliza una herramienta de
  • Ryobi RY40440 | Operation Manual - Page 7
    ères combustibles ou inflammables.  Laisser le(s) bloc-piles dans le seau remplit avec de l'eau du robinet et appeler les Service à la clientèle au 1-800-860-4050 pour de plus amples instructions sur la bonne façon d'éliminer le(s) bloc-piles exposé(s). Le défaut de suivre les étapes ci-haut lorsqu
  • Ryobi RY40440 | Operation Manual - Page 8
    MANUEL D'UTILISATION/40 V BLOC-PILE DE LITHUM-ION OP4015 / OP4026 / OP40201 / OP40261 / OP4030 / OP40301 / OP4040 / OP40401 / OP4050 / OP40501 / OP40601 MANUAL DEL OPERADOR/PAQUETE DE BATERÍAS 40 V IONES DE LITIO OP4015 / OP4026 / OP40201 / OP40261 / OP4030 / OP40301 / OP4040 / OP40401 / OP4050
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

1 - English
SAFETY RULES
When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another.
Shorting the
battery terminals together may cause sparks, burns, or a
fire and can lead to personal injury or property damage.
Always remove battery pack from your tool when you
are assembling parts, making adjustments, cleaning,
or when not in use.
Removing battery pack will prevent
accidental starting that could cause serious personal
injury.
Always remove battery pack before storing the device.
When battery becomes fully charged, unplug the
charger from the power supply and remove the bat-
tery pack from the charger.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1.
Failure to do so could result
in objects being thrown into your eyes and other possible
serious injuries.
Keep battery pack dry, clean, and free from oil and
grease.
Always use a clean cloth when cleaning. Never
use brake fluids, gasoline, petroleum-based products, or
any solvents to clean battery pack.
Do not use a battery pack that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
Do not modify or attempt to repair a battery pack that
has been damaged.
Do not expose a battery pack or appliance to fire or
excessive temperature.
Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
Have servicing performed by a qualified repair person
using only identical replacement parts.
This will ensure
that the safety of the product is maintained.
Save these instructions.
Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions also.
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below, may result
in electric shock, fire and/or serious personal injury.
Battery tools do not have to be plugged into an elec-
trical outlet; therefore, they are always in operating
condition. Be aware of possible hazards when not
using your battery tool or when changing accessories.
Following this rule will reduce the risk of electric shock,
fire, or serious personal injury.
Do not place battery tools or their batteries near fire
or heat.
This will reduce the risk of explosion and possibly
injury.
Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow.
A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
Batteries can explode in the presence of a source
of ignition, such as a pilot light.
To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush with water
immediately.
Do not charge battery tool in a damp or wet location.
Following this rule will reduce the risk of electric shock.
Do not use, store, or charge battery packs in locations
where the temperature is less than 50°F or more than
100°F.
Do not store outside or in vehicles.
Charge only with RYOBI 40 V lithium-ion battery
chargers.
Use of other chargers may result in personal
injury, fire, or damage.
Do not charge battery in an area of extreme heat or
cold. It will work best at normal room temperature.
Under extreme usage or temperature conditions, bat-
tery leakage may occur. If liquid comes in contact with
your skin, wash immediately with soap and water. If
liquid gets into your eyes, flush them with clean water
for at least 10 minutes, then seek immediate medical
attention.
Following this rule will reduce the risk of seri-
ous personal injury.
OPERATOR’S MANUAL
40 V LITHIUM-ION BATTERY PACK
OP4015 / OP4026 / OP40201 / OP40261 / OP4030 /
OP40301 / OP4040 / OP40401 / OP4050 / OP40501 / OP40601
To register your RYOBI
product, please visit:
Use this battery pack for RYOBI
40 V cordless products only.
Refer to the Operator’s Manual provided with product. Always
mention the model number above when communicating with
us regarding this battery pack.
LITHIUM-ION BATTERY PACKS
Lithium-ion batteries deliver fade free power for their entire
run time. Lithium-ion tools will not gradually lose power due
to decreasing battery charge. Instead, power from the battery
pack will drop from full to zero once the full charge has been
drained from the battery. Once this happens, recharging of
the battery is required. It is not necessary to drain the battery
pack completely before recharging.
BATTERY PROTECTION FEATURES
Lithium-ion battery packs are designed with features that
protect the lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset and
resume operation. If the tool still does not work, the battery
needs to be recharged.
COLD WEATHER OPERATION
The lithium-ion battery pack can be used in temperatures
down to –4°F. Put the battery pack on a tool and use the tool
in a light duty application. After about a minute, the pack will
warm up and begin operating normally.
OPERATION