Samsung 245T User Manual (ENGLISH)

Samsung 245T - SyncMaster - 24" LCD Monitor Manual

Samsung 245T manual content summary:

  • Samsung 245T | User Manual (ENGLISH) - Page 1
    SyncMaster 245T Install driver Install programs
  • Samsung 245T | User Manual (ENGLISH) - Page 2
    to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock Power When not used for extended period of time, set your computer to DPM. If using a screen saver, set it to active screen mode. The images here are for reference only, and are not
  • Samsung 245T | User Manual (ENGLISH) - Page 3
    connect too many extension cords or plugs to one outlet. This may cause fire. Do not disconnect the power cord while using the monitor. A surge may be caused by the separation and may damage the monitor. Do not use the power cord when the connector or plug is dusty. If the connector or plug of the
  • Samsung 245T | User Manual (ENGLISH) - Page 4
    high or low temperatures, high humidity, and exposed to chemical substances and where it will be operated for 24 hours continuously such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of
  • Samsung 245T | User Manual (ENGLISH) - Page 5
    Do not place the monitor face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified professional. Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the
  • Samsung 245T | User Manual (ENGLISH) - Page 6
    LCD screen, wipe with a slightly moistened, soft fabric. Do not spray water or detergent directly onto the monitor. This may cause damage, electric shock or fire. Use fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax,
  • Samsung 245T | User Manual (ENGLISH) - Page 7
    dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact the Service Center. The monitor may malfunction, causing electric shock or fire. Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time. Failure to do
  • Samsung 245T | User Manual (ENGLISH) - Page 8
    substance enters the monitor, unplug the power cord and contact the Service Center. Keep the product away from combustible chemical sprays or the model. An inappropriate resolution may cause undesirable picture quality. 24 inch (61 cm) - 1920 x 1200 Viewing the monitor continuously at a too
  • Samsung 245T | User Manual (ENGLISH) - Page 9
    lifting up or moving the monitor, do not lift the monitor upside down while holding only the stand. This may cause your monitor to fall, and become damaged or cause personal injury. Good Postures When Using the Monitor Try to maintain a good posture when using the monitor. z Keep your back straight
  • Samsung 245T | User Manual (ENGLISH) - Page 10
    to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local
  • Samsung 245T | User Manual (ENGLISH) - Page 11
    ) z Turn the power off when using a stationary pattern. - Turn the power off for 4 hours after 20 hours in use - Turn the power off for 2 hours after 12 hours in use z Use a Screen saver if possible - Screen saver in one color or a moving image is recommended. z Set the Monitor to power off with the
  • Samsung 245T | User Manual (ENGLISH) - Page 12
    Ex) The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video
  • Samsung 245T | User Manual (ENGLISH) - Page 13
    Package Contents Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Without Stand With Stand Monitor Manual Monitor & Sliding Stand Warranty Card User's Guide, Monitor
  • Samsung 245T | User Manual (ENGLISH) - Page 14
    ) Natural Color software, AutoRotation software Others Power Cord D-sub Cable USB Cable Cleaning Cloth Will be applied to black and high gloss models only. Sold separately S-Video Cable HDMI Cable Speaker package(option) RCA Cable DVI-D Cable Component Cable Speaker Your Monitor Front RCA
  • Samsung 245T | User Manual (ENGLISH) - Page 15
    your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. 2) Text For documentations or works involving heavy text. see an animation clip AV /S- The Monitor has four automatic picture settings ("Dynamic", "Standard", Video/Component /HDMI : "Movie" and "Custom")
  • Samsung 245T | User Manual (ENGLISH) - Page 16
    AV, S-Video, Component and HDMI input signal.) Changing the source is only allowed for external devices that are connected to the monitor at the time. >> Click described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it
  • Samsung 245T | User Manual (ENGLISH) - Page 17
    VIDEO IN : External device (S-video) input terminal AUDIO POWER (DC 12V ) : Connect the speaker power line connected to the speaker to the AUDIO POWER terminal of the monitor. AUDIO OUT : When connecting an external device to your monitor using an HDMI cable, you must connect the AUDIO OUT terminal
  • Samsung 245T | User Manual (ENGLISH) - Page 18
    it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchase it. Stand Stopper z Remove the fixing pin on the stand to lift the monitor up and down. See Connecting Cables for further information regarding cable connections.
  • Samsung 245T | User Manual (ENGLISH) - Page 19
    Connecting Cables Connect the power cord for your monitor to the POWER IN port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the RGB (Analog) connector on the video card. - Connect the signal cable to the
  • Samsung 245T | User Manual (ENGLISH) - Page 20
    reader, HDD-type MP3 player, etc.) z You can use other USB devices that can be connected to a computer. When connecting a device to the DOWN port of the monitor, connect the device using a cable appropriate to the device. (For the purchase of the cable and external devices, ask the service center of
  • Samsung 245T | User Manual (ENGLISH) - Page 21
    , be careful that the grooves of the monitor and the speaker . ( )are aligned with each other. Adjust the aligned positions until you hear a 'click'. If a speaker is connected correctly, you can hear a 'click'.If a speaker is connected without you hearing a 'click', the holding part may become
  • Samsung 245T | User Manual (ENGLISH) - Page 22
    the volume increases. Connect the power line connected to the speaker to the black terminal of the monitor. This speaker is not connected to an external power source. It is connected to a monitor for the required power. Connecting to Other devices This monitor allows the user to connect it to such
  • Samsung 245T | User Manual (ENGLISH) - Page 23
    conncted external device manual . Connecting HDMI You cannot connect a PC to the HDMI IN terminal. Input devices such as digital DVD are connected to the HDMI IN terminal of the monitor using the HDMI cable. When all the connections are completed, connect the power cords for the monitor and DVD (or
  • Samsung 245T | User Manual (ENGLISH) - Page 24
    pivoting the monitor, rotation angle is displayed on screen of the monitor.) 0° 90° When rotating the screen, make sure to tilt the monitor 45 to 65 degrees so that it does not touch the floor. When tilting the screen backwards, do not tilt it more than 65 degrees. Sliding stand Stand Stopper
  • Samsung 245T | User Manual (ENGLISH) - Page 25
    connecting to the monitor, the power cord of cable can be destroyed. Tilt angle Using ( ), You can adjust the tilt anlgle within a range of 3° forward to 25° backward for the most comfortable viewing angle. Attaching a Base This monitor accepts a 200 mm x 100 mm VESA-compliant Mounting interface pad
  • Samsung 245T | User Manual (ENGLISH) - Page 26
    -specified wall mount is used or the consumer fails to follow the product installation instructions. z To mount the monitor on a wall, you should purchase the wall mounting kit that allows you to mount the monitor at least 10cm away from the wall surface. z Contact the nearest Samsung Service Center
  • Samsung 245T | User Manual (ENGLISH) - Page 27
    file at the Internet web site shown below. Internet web site :http://www.samsung.com/ (Worldwide) http://www.samsung.com/monitor (U.S.A) http://www.sec.co.kr/monitor (Korea) http://www.samsungmonitor.com.cn/ (China) Installing the Monitor Driver (Automatic) Insert the CD into the CD-ROM drive. Click
  • Samsung 245T | User Manual (ENGLISH) - Page 28
    ://www.samsung.com/ Monitor driver installation is completed. Installing the Monitor Driver (Manual) Windows Vista | Windows XP | Windows 2000 | Windows ME | Windows NT | Linux Microsoft® Windows® Vista Operating System Insert your Manual CD into your CD-ROM drive. Click (Start) and "Control Panel
  • Samsung 245T | User Manual (ENGLISH) - Page 29
    MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage http://www.samsung.com/ Click "Update Driver..." in the "Driver" tab. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device
  • Samsung 245T | User Manual (ENGLISH) - Page 30
    " → "OK" → "OK" on the following screens displayed in sequence. Microsoft® Windows® XP Operating System Insert the CD into the CD-ROM drive. Click "Start" → "Control Panel" then click the "Appearance and Themes" icon. Click "Display" icon and choose the "Settings" tab then click "Advanced."
  • Samsung 245T | User Manual (ENGLISH) - Page 31
    on the "Monitor" tab and select "Driver" tab. Click "Update Driver." and select "Install from a list or." then click the "Next" button. Select "Don't search ,I will." then click "Next" and then click "Have disk". Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in
  • Samsung 245T | User Manual (ENGLISH) - Page 32
    the "Continue Anyway" button. Then click the "OK" button. This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage http://www.samsung.com/ Click the "Close" button then click the "OK" button
  • Samsung 245T | User Manual (ENGLISH) - Page 33
    mode of resolution, colors, or frequency). If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide. Linux Operating System To execute X-Window, you need to make the X86Config file, which is a type of
  • Samsung 245T | User Manual (ENGLISH) - Page 34
    in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. the Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung
  • Samsung 245T | User Manual (ENGLISH) - Page 35
    { Relaunch the application. In most cases this should fix the problem. 3. User Applications using OpenGL and DirectDraw (3D drawing) will not function as per Dual is not supported in Windows® 98, ME, NT 4.0. 6. MagicRotation does not provide support for 24 bits per pixel (Bit depth/Color Quality).
  • Samsung 245T | User Manual (ENGLISH) - Page 36
    Hard disk space above Service Packs z It is recommended that your System has the latest Service Pack installed. z be removed only by using the "Add or Remove Programs" option of the Windows® Control Panel. Perform the following technical support for AutoRotation, FAQs (questions and answers) and
  • Samsung 245T | User Manual (ENGLISH) - Page 37
    Buttons MPA Push the MPA button to turn MPA On/Off. Use this button to open the on-screen menu and exit from the → Internet → Game → Sports → Movie → Dynamic CR ) AV/S-Video/Component/HDMI : Mode The Monitor has four automatic picture settings that are preset at the factory. Then press the button
  • Samsung 245T | User Manual (ENGLISH) - Page 38
    screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming PC signal. The values of fine, coarse and more accuracy. If you change resolution in the control panel, auto function will be executed automatically. OSD Lock & Unlock
  • Samsung 245T | User Manual (ENGLISH) - Page 39
    button after locking the OSD Menu Locked Description This is the function that locks the OSD in order to keep the current states of settings or prevent others from adjusting the current settings. Lock : still adjust the brightness and contrast, and adjust MagicBright ( ) using the Direct button.
  • Samsung 245T | User Manual (ENGLISH) - Page 40
    the button again to circle through available preconfigured modes. (Custom → Text → Internet → Game → Sports → Movie → Dynamic CR ) AV/S-Video/Component/HDMI : Mode The Monitor has four automatic picture settings that are preset at the factory. Then press the button again to circle through available
  • Samsung 245T | User Manual (ENGLISH) - Page 41
    to change the input mode, a message appears in the upper left of the screen displaying the current mode -- PC, DVI, AV, S-Video and , Component and HDMI input signal.) Changing the source is only allowed for external devices that are connected to the
  • Samsung 245T | User Manual (ENGLISH) - Page 42
    through the PIP screen in PC and DVI (PC) mode. Menu MPA Description Push the MPA button to turn MPA On/Off. This function is used to play movies. You can enjoy better screen quality.
  • Samsung 245T | User Manual (ENGLISH) - Page 43
    External Input List) and the selected resolution. Menu Source List Edit Name Description Use to select PC or other external input sources connected to the Monitor. Use to select the screen of your choice. 1) PC 2) DVI 3) AV 4) S-Video 5) Component 6) HDMI MENU Name the input device connected to
  • Samsung 245T | User Manual (ENGLISH) - Page 44
    source selected in External Input List) and the selected resolution. Menu Description MagicBright™ MagicBright™ is a new feature providing on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. 2) Text : For documentations or works involving heavy text. 3)
  • Samsung 245T | User Manual (ENGLISH) - Page 45
    using Custom function, MagicBright™ will turn to Custom mode. Image Lock Image Lock is used using the Fine adjustment, use the Coarse adjustment and then use are removed. Then, use the horizontal position adjustment resolution in the control panel the screen 4) Color : Adjusts the Color of the PIP
  • Samsung 245T | User Manual (ENGLISH) - Page 46
    selected resolution. Menu Mode Custom Description The Monitor has four the surroundings are dark. This will save power and reduce eye fatigue. 4) Custom : to your preferences MENU You can use the on-screen menus to change Adjust the Sharpness. 4) Color : Adjust the picture Color. 5) Tint : Adds
  • Samsung 245T | User Manual (ENGLISH) - Page 47
    / 4:3 z Component / HDMI : Wide / 16:9 / resolution. Menu Color Innovation Description Play/Stop Color Innovation function provides optimized color for personal favor to view effectively with WCG-CCFL which was applied to Samsung with the screen when the Color Innovation function is enabled. 5)
  • Samsung 245T | User Manual (ENGLISH) - Page 48
    /HDMI : Cool2 / Cool1 / Normal / Warm1 / Warm2 MENU Color Control Adjusts the individual R, G, B color controls Color 6 types: Red, Green, Blue, Cyan, Magenta and Yellow - Can adjust each of them to the preference of the user. 1) Saturation Adjusts the color saturation. 2) Hue Adjusts the color
  • Samsung 245T | User Manual (ENGLISH) - Page 49
    window. / / / MENU Setup The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. Menu Description Play/Stop Language You can choose one of 11 languages.
  • Samsung 245T | User Manual (ENGLISH) - Page 50
    Safety Screen Type. (Pixel, Bar, Eraser) MENU Audio Power When your PC is in Power Saving mode, and this function is turned 'On', power is supplied to the 'AUDIO POWER' terminal of the external speaker on the back of your monitor. If this function is turned 'Off', power is not supplied to that
  • Samsung 245T | User Manual (ENGLISH) - Page 51
    with the factory default values. 1) Image Reset : Image parameters are replaced with the factory default values. - Available in PC mode only 2) Color Reset : Color parameters are replaced with the factory default values. - Available in PC/DVI(PC) Mode Only - Not available in MagicBright™ mode
  • Samsung 245T | User Manual (ENGLISH) - Page 52
    Symptom No images on the screen. I cannot turn on the monitor. Check List Solutions Is the power cord connected properly? Check the power cord connection and supply. Can you see "Check signal cable" on the screen? (Connected using the D-sub cable) Check the signal cable connection. (Connected
  • Samsung 245T | User Manual (ENGLISH) - Page 53
    by referring to the video card manual. The screen suddenly has become unbalanced. Have you changed the video card or the driver? Adjust screen image position and size using the OSD. Have you adjusted the resolution or frequency to the monitor? Adjust the resolution and frequency at the video
  • Samsung 245T | User Manual (ENGLISH) - Page 54
    Have you installed the monitor driver? Install the monitor driver according to the Driver Installation Instructions. See the video card manual to see if the Plug & Play (VESA DDC) function can be supported. Install the monitor driver according to the Driver Installation Instructions. Check when
  • Samsung 245T | User Manual (ENGLISH) - Page 55
    computer. Windows ME/2000 : Set the resolution at the Control Panel → Display → Screen Saver. Set the function at BIOS-SETUP of the computer. Refer to Windows/Computer Manual Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water. Do
  • Samsung 245T | User Manual (ENGLISH) - Page 56
    the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer. Judging the
  • Samsung 245T | User Manual (ENGLISH) - Page 57
    General Model Name SyncMaster 245T LCD Panel Size Display area Pixel Pitch 24" Wide Diagonal (61 cm) 518.4 mm(H) x 324.0 mm(V) 0.270 mm(H) x 0.270 mm(W) Synchronization Horizontal Vertical 30 ~ 81 kHz 56 ~ 75 Hz Display Color 16.7M Resolution Optimum resolution 1920x1200 @60 Hz
  • Samsung 245T | User Manual (ENGLISH) - Page 58
    Stand) 560.5 X 460.0 X 250.0 mm / 22.1 x 18.1 x 9.8 inch (With Stand) / 8.8 kg / 19.4 lbs VESA Mounting monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD panel manufactured by using
  • Samsung 245T | User Manual (ENGLISH) - Page 59
    Power Indicator Power Consumption Blue Less than 130 watts Blue Blinking Less than 2 Watts Black 0 watts This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPM functionality. As an ENERGY STAR® Partner, SAMSUNG has determined that
  • Samsung 245T | User Manual (ENGLISH) - Page 60
    same image many times per second to display an image to the user. The frequency of this repetition is called Vertical Frequency or Refresh Rate. Unit : Hz The supported modes for each external input signal Supported Resolutions Input Source 480i 576i 480p 576p 720p @60Hz @50Hz @60Hz @50Hz
  • Samsung 245T | User Manual (ENGLISH) - Page 61
    5303 http://www.samsung.com http://www.samsung.com/ca http://www.samsung.com/mx http://www.samsung.com/ar http://www.samsung.com/br http://www.samsung.com/cl http://www.samsung.com.co http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin
  • Samsung 245T | User Manual (ENGLISH) - Page 62
    RUSSIA UKRAINE UZBEKISTAN Asia Pacific AUSTRALIA CHINA HONG KONG 70 70 19 70 030-6227 515 3260 SAMSUNG(7267864) (€ 0,15/min) 01805 - 121213 (€ 0,14/Min) 06-80-SAMSUNG (7267864) 800 SAMSUNG (7267864) 0032 (0)2 201 24 18 0900 20 200 88 (€ 0,10/Min) 815-56 480 0 801 801 881 80 8 200 128 0818
  • Samsung 245T | User Manual (ENGLISH) - Page 63
    method is the same as that used in TVs. Plug & Play This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for the Plug & Play function. Resolution
  • Samsung 245T | User Manual (ENGLISH) - Page 64
    . Resolution : 1920 x 1200 Vertical frequency (refresh rate) : 60 Hz TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of
  • Samsung 245T | User Manual (ENGLISH) - Page 65
    trademarks of Microsoft Corporation; VESA, DPM and DDC are registered trademarks of Video Electronics Standard Association; the ENERGY STAR® name and logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR® Partner, Samsung Electronics Co., Ltd. has
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65

Install driver
Install programs
SyncMaster 245T