Samsung 320TSN User Manual

Samsung 320TSN - SyncMaster - 32" LCD Flat Panel Display Manual

Get Samsung 320TSN - SyncMaster - 32inch LCD Flat Panel Display PDF manuals and user guides
UPC - 729507807959
View all Samsung 320TSN manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung 320TSN manual content summary:

  • Samsung 320TSN | User Manual - Page 1
    SyncMaster 320TSn-3 LCD Display User Manual The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
  • Samsung 320TSN | User Manual - Page 2
    screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Shortcut to Anti-Afterimage Instructions Do not use a damaged power cord or plug or a damaged or loose power outlet. • Otherwise, this may result in electric shock or fire. Do not touch the
  • Samsung 320TSN | User Manual - Page 3
    Instructions Ensure power plug to a wall outlet that can be easily reached. • When a problem occurs with the product, you must unplug the power plug to cut the power the product. Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low
  • Samsung 320TSN | User Manual - Page 4
    Instructions this may result in damage to the screen display. Ensure that an authorized installation voltage cables. • If the antenna touches or falls onto a high voltage cable, it may of your monitor is adjustable, do not place any object or part of your body on the stand when lowering
  • Samsung 320TSN | User Manual - Page 5
    Instructions When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft cloth. Do not spray cleaner directly onto the surface of the product. • Otherwise, this may result in the discoloration and distortion of the structure and the screen Service Center
  • Samsung 320TSN | User Manual - Page 6
    do not touch the power cord or antenna cable. • Otherwise, this may result in electric shock or fire. Do not try to move the monitor by pulling the power cord and contact a Service Center. • Otherwise, this may result in electric shock or fire. When using a fixed screen for a long time, an
  • Samsung 320TSN | User Manual - Page 7
    Safety Instructions Set a resolution and frequency appropriate to the product. • Otherwise, your eyesight not sit too close to the product. Take a rest for at least five (5) minutes after using the monitor for one (1) hour. • This reduces eye fatigue. Do not install it in an unstable location such
  • Samsung 320TSN | User Manual - Page 8
    Instructions result in electric shock or fire. When there is a gas leak, do not touch the product or the power plug; ventilate immediately. • If a spark occurs, careful when adjusting the angle of the product or the height of the stand. • This may result in personal injury as your hand or fingers
  • Samsung 320TSN | User Manual - Page 9
    Safety Instructions Do not install the product in a location low enough for children to reach. • Otherwise, it may fall and result in personal injury. • Since the front
  • Samsung 320TSN | User Manual - Page 10
    in case you need to move the Product later. • If any items are missing, contact your dealer. • Contact a local dealer to purchase optional items. Unpacking Manuals LCD Display Quick Setup Guide Warranty Card (Not available in all locations) User Manual MagicInfo Software DVD
  • Samsung 320TSN | User Manual - Page 11
    Cables Power Cord Others Introduction D-Sub Cable Remote Control (BP59-00138B) Sold separately Batteries (AAA X 2) (Not available in all locations) Semi Stand KIT LAN Cable USB Cable RGB to BNC Cable RGB to COMPONENT Cable TV tuner box Wall Mount KIT RS232C Cable Note Accessories that
  • Samsung 320TSN | User Manual - Page 12
    Introduction Your LCD Display The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. Front MENU button [MENU] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or
  • Samsung 320TSN | User Manual - Page 13
    box specified by Samsung and connect the MagicInfo output on the network box to [HDMI IN 2 (MAGICINFO)] on the product. D.MENU button Opens the on-screen D.MENU. Note in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when
  • Samsung 320TSN | User Manual - Page 14
    Introduction POWER S/W ON [ ] / OFF Switches the LCD Display On/Off. POWER The power cord plugs into the LCD Display and the wall outlet. RGB/COMPONENT IN (PC/COMPONENT Connection Terminal (Input)) • Connect the [RGB/COMPONENT IN] port on the monitor to the RGB port on the PC using the D-SUB cable.
  • Samsung 320TSN | User Manual - Page 15
    Connect the [AV IN] terminal of your monitor to the video output terminal of the external authorized TV-Tuner Box [SBB_DTC/ZA]. Otherwise, this may result in damage to the product your LCD Display to the HDMI terminal of your digital output device using a HDMI cable. • Up to HDMI 1.3 can be supported. Note
  • Samsung 320TSN | User Manual - Page 16
    HDMI terminal of your digital output device using a HDMI cable. • Up to HDMI 1.3 can be supported. Using MagicInfo To use MagicInfo with an TSn-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to [HDMI IN 2 (MAGICINFO)] on the
  • Samsung 320TSN | User Manual - Page 17
    separately. • These are general instructions. For exact instructions, see the User Manual supplied with the locking device. • You can purchase the locking device from an electronics store, an online shop, or our service Center. Note The power switches of both of the monitor and the network box must
  • Samsung 320TSN | User Manual - Page 18
    device operating near the LCD Display , causing a malfunction due to interference with the frequency. POWER OFF Number Buttons DEL / GUIDE button + VOL - button. TTX/MIX MTS/DUAL ENTER/PRE-CH MUTE CH/P TV MENU RETURN EXIT MagicInfo POWER OFF Number Buttons DEL / GUIDE button Turns the product On
  • Samsung 320TSN | User Manual - Page 19
    external devices that are connected to the LCD Display at the time. DTV menu does not work for this LCD Display. Moves from one the upper left corner of the screen. In TV mode, these buttons can services via teletext. - Teletext Buttons MTS/DUAL Note This function does not work for this LCD
  • Samsung 320TSN | User Manual - Page 20
    DUAL- STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM MONO/NICAM STEREO can be operated depending on the broadcasting type by using the DUAL screen. MagicInfo Quick Launch Button. Using MagicInfo To use MagicInfo with an TSn-3 model, install inside the product a network box specified by Samsung
  • Samsung 320TSN | User Manual - Page 21
    Introduction User Installation Guide Note • Be sure to call an installation expert of Samsung Electronics to install the product. • The warranty becomes invalid if the product is installed by someone other than a profes- sional authorized by Samsung Electronics. • A Samsung Electronics service
  • Samsung 320TSN | User Manual - Page 22
    or more behind the product for ventilation, as shown above, and maintain the ambient temperature at 35°C or lower. Note A Samsung Electronics service center can provide details. 2. Embedded Mount guide A : min. 40 mm B : min. 70 mm C : min. 50 mm D : min. 50 mm E : Ambient
  • Samsung 320TSN | User Manual - Page 23
    order. After your order is placed, installation professionals will visit you and install the bracket. • At least 2 persons are needed in order to move the LCD Display. • SAMSUNG is not responsible for any product damage or any injury caused by installation at customer's discretion. Dimensions
  • Samsung 320TSN | User Manual - Page 24
    and 8 to 12 mm length. Accessories (sold separately) • Dimension with other accessories Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the
  • Samsung 320TSN | User Manual - Page 25
    Introduction To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. Notice • Mount the
  • Samsung 320TSN | User Manual - Page 26
    Introduction A - LCD Display B - Wall Bracket C - Wall Wall Bracket Angle Adjustment Adjust the bracket angle to -2° before installing it on the wall. 1. Fix the product to the wall
  • Samsung 320TSN | User Manual - Page 27
    Introduction Remote Control (RS232C) Cable connections interface pin Bits rate Data Bits Parity Stop Bits Flow control Maximum length RS232C(9 pin) TxD(No.2) RxD(No.3) GND(No.5) 9600 bps 8 bit None 1 bit None 15 m (only shielded type) • Pin assignment Pin Signal 1 Data Carrier Detect 2
  • Samsung 320TSN | User Manual - Page 28
    command type command Value range 1 Power control 0x11 0~1 2 Volume control 0x12 0~100 3 Input source control 0x14 - 4 Screen Mode control 0x18 - 5 Screen Size control 0x19 0~255 6 PIP on/off control 0x3C 0~1 7 Auto adjustment control 0x3D 0 8 Video wall Mode control
  • Samsung 320TSN | User Manual - Page 29
    commands. At the time, each product will follow commands but it will not respond with ACK. • Power Control • Function Personal Computer turns TV / Monitor power ON/OFF. • Get Power ON/OFF Status Header 0xAA command 0x11 DATA Length ID CheckSum 0 • Set Power ON/OFF Header command ID 0xAA
  • Samsung 320TSN | User Manual - Page 30
    Length ID CheckSum 0 • Set Volume Header command ID 0xAA 0x12 DATA Length 1 DATA Volume Volume : Volume value code to be set on TV / Monitor (0 ~ 100) CheckSum • Ack Header command ID 0xAA 0xFF Volume : Same as above DATA Length 3 Ack/Nak 'A' r-CMD 0x12 Val1 Volume Check Sum
  • Samsung 320TSN | User Manual - Page 31
    • Set Input Source Header command ID 0xAA 0x14 DATA Length 1 DATA CheckSum Input Source Input Source : Input Source code to be set on TV / Monitor 0x14 0x1E 0x18 0x0C 0x04 0x08 0x20 0x1F 0x30 0x40 0x21 0x22 0x23 0x24 0x25 PC BNC DVI AV S-Video Component MagicInfo DVI_VIDEO RF(TV)
  • Samsung 320TSN | User Manual - Page 32
    command 0x18 DATA Length ID CheckSum 0 • Set Picture Size Header command ID 0xAA 0x18 DATA Length 1 DATA Screen Mode Screen Mode : Screen Mode code to be set on TV / Monitor 0x01 0x04 0x31 0x0B 16 : 9 Zoom Wide Zoom 4 : 3 CheckSum • Ack Header 0xAA command 0xFF ID DATA Length
  • Samsung 320TSN | User Manual - Page 33
    DATA Length ID CheckSum 0 • Ack Header 0xAA command 0xFF ID DATA Length Ack/Nak r-CMD 3 'A' 0x19 Val1 Screen Size Check Sum Screen Size : Screen Size of TV / Monitor (Range : 0 ~ 255, Unit : Inch) • Nak Header 0xAA command 0xFF ID DATA Length Ack/Nak r-CMD 3 'N' 0x19 ERR
  • Samsung 320TSN | User Manual - Page 34
    shows what occurred error is Val1 ERR Check Sum • Auto Adjustment Control (PC, BNC Only) • Function Personal Computer controls PC system screen automatically. • Get Auto Adjustment Status None • Set Auto Adjustment Header command ID 0xAA 0x3D Auto Adjustment : 0x00 (Always) DATA Length
  • Samsung 320TSN | User Manual - Page 35
    Header command ID 0xAA 0x5C DATA Length 1 DATA CheckSum Video Wall Mode Video Wall Mode : Video Wall Mode code to be set on TV / Monitor 1 : Full 0 : Natural • Ack Header command 0xAA 0xFF DATA Length Ack/Nak r-CMD ID 3 'A' 0x5C Video Wall Mode : same as above Val1 Video Wall Mode
  • Samsung 320TSN | User Manual - Page 36
    ID CheckSum 0 • Set Safety Lock Enable / Disable Header command ID 0xAA 0x5D DATA Length 1 Safety Lock : Lock code to be set on TV / Monitor 1 : ON 0 : OFF DATA CheckSum Safety Lock • Ack Header 0xAA command 0xFF ID DATA Length Ack/Nak r-CMD 3 'A' 0x5D Val1 Safety Lock Check
  • Samsung 320TSN | User Manual - Page 37
    There are several ways to connect the computer to the monitor. Choose one from the following options. Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, [RGB/COMPONENT IN] port on the back of your LCD Display and the 15 pin D-sub Port on the
  • Samsung 320TSN | User Manual - Page 38
    Display to the AUDIO port on the back of the LCD Display. Connect the power cord for your LCD Display to the POWER port on the back of the LCD Display. Turn on the power switch. Note Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices Note • AV input
  • Samsung 320TSN | User Manual - Page 39
    on the side or back of the camcorder. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the [AV IN] on the LCD Display .
  • Samsung 320TSN | User Manual - Page 40
    audio cables between the AUDIO OUTPUT jacks on the camcorder and the [AV /COMPONENT AUDIO IN [R-AUDIO-L]] on the LCD Display . 3. Press SOURCE on the product or remote control and select "AV". 4. Then, start the Camcorders select "HDMI1 / HDMI2" Note In HDMI mode, only PCM format audio is supported.
  • Samsung 320TSN | User Manual - Page 41
    the opposite jack to the [RGB/DVI/DP/HDMI AUDIO IN] terminal of the LCD Display. 3. Press SOURCE on the product or remote control and select "HDMI1 Connect a RGB to Component cable between the [RGB/COMPONENT IN] port on the LCD Display and the PR, Y, PB jacks on the DVD player. Connect a set of audio
  • Samsung 320TSN | User Manual - Page 42
    cable is optional. • For an explanation of Component video, consult your DVD manual. Connecting a DTV Set Top (Cable/Satellite) Box Connect a RGB to Component of audio cables between the [AV/COMPONENT AUDIO IN [R-AUDIO-L]] on the LCD Display and the AUDIO OUT jacks on the Set Top Box. Note • Press
  • Samsung 320TSN | User Manual - Page 43
    Connections Connecting to an Audio System 1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and [AUDIO OUT] on LCD Display. Connecting to MAGICINFO OUT Connect the [MAGICINFO OUT] terminal and the [HDMI IN 2 (MAGICINFO)] terminal on the product using the DP to HDMI
  • Samsung 320TSN | User Manual - Page 44
    Connecting a LAN Cable Connections Connect the LAN cable between the [LAN] port on the product and the [LAN] port on your PC. Connecting a USB devices You can connect USB devices such as a mouse or keyboard.
  • Samsung 320TSN | User Manual - Page 45
    Program file at the Internet web site shown here. Internet web site : http://www.samsung.com/ Installing the Monitor Driver (Automatic) 1. Insert CD into the CD-ROM drive. 2. Click "Windows". 3. Choose your monitor model in the model list, then click the "OK" button. 4. If you can see following
  • Samsung 320TSN | User Manual - Page 46
    , and installing it will not damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft® Windows Vista™, Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click (Start) and "Control
  • Samsung 320TSN | User Manual - Page 47
    under certifying MS logo, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage. 6. Click "Update Driver..." in the "Driver" tab. 7. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device
  • Samsung 320TSN | User Manual - Page 48
    Using the Software 9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" "Close" "OK" "OK" on the following screens displayed in sequence. Microsoft® Windows® XP Operating System
  • Samsung 320TSN | User Manual - Page 49
    3. Click "Display" icon and choose the "Settings" tab then click "Advanced...". 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button. 6. Select "Don't search, I will...", then click
  • Samsung 320TSN | User Manual - Page 50
    click the "Continue Anyway" button. Then click "OK" button. Note This monitor driver is certified by Microsoft, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button, then click the "OK
  • Samsung 320TSN | User Manual - Page 51
    "Display a list of the known drivers for this device so that I can choose a specific driver", then click "Next" and then click "Have disk". 7. Click the "Browse" button, then choose A:(D:\Driver). 8. Click the "Open" button, then click "OK" button. 9. Choose your monitor model and click the "Next
  • Samsung 320TSN | User Manual - Page 52
    "Test". If the screen is not normal, change to a different mode (lower mode of resolution, Colors or frequency). Note If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide. Linux Operating System To
  • Samsung 320TSN | User Manual - Page 53
    information will not affect the actual execution of X-Window. 10. You have finished setting up your monitor. Execute X-Window after setting other re- quested hardware. IRTOUCH Touchscreen Control PanelInstalling the Driver Double-click the shortcut on the desktop, or go to "Start" -> "All Programs
  • Samsung 320TSN | User Manual - Page 54
    a USB connection and supports multiple touchscreens connected to appear in the center of each monitor in order of priority. Click the the list of choices for calibrating the touch screen, click [Calibrate]. If all the applicable to all modes, especially Dual Mode (Horizontal Span or Vertical Span
  • Samsung 320TSN | User Manual - Page 55
    Delay Touch 8. Enable Beep FIG. (7) Modes There are three touch modes : "Click on touch," "Click on Release," "Mouse Emulation." 1. Click on touch A mode. A click is recognized when you lift your finger off the screen. This mode allows precise control and is recommended for small-button applications
  • Samsung 320TSN | User Manual - Page 56
    Touch" mode. 3. Enable Double Click Double clicking works the same on the touch screen as it does with a mouse. Tap a spot on the screen more sensitive the touchscreen is to double clicks. Double-click is supported by the "Click on touch," "Click on Release," and "Mouse Emulation" modes. 4. Enable
  • Samsung 320TSN | User Manual - Page 57
    again when you lift your finger off the screen. 4. PC Speaker : After installing the driver, you will hear a beep sound by default Driver", and click on "Remove" to uninstall the driver. FIG. (8) General touchscreen settings(For reference) Select "Mouse Emulation" mode, and then choose "Enable Touch
  • Samsung 320TSN | User Manual - Page 58
    1. Enable Double Click Double clicking works the same on the touch screen as it does with a mouse. Tap an object on the screen twice in rapid succession to open the object. "Speed" should be set to 500-550 milliseconds and "Area" to 32 pixels 2. Enable Right Click Enable the right-click function
  • Samsung 320TSN | User Manual - Page 59
    click "Next." 8. The installation progress screen will appear. 9. The "InstallShield Wizard Complete" screen will appear. Click "Finish." Note Select may not appear depending on specification of computer system or monitor. If that happens, press F5 Key. Installation Problems The installation of MDC
  • Samsung 320TSN | User Manual - Page 60
    between a PC and a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a display. Main Screen Click Start > Program > Samsung > MDC System to start the program. Select a set to see the volume of the selected set within the slider.
  • Samsung 320TSN | User Manual - Page 61
    the main icons to switch into each screen. 2. Allows you to enable or disable displayed by configuring 7 and 8. 10. This searches for monitors. The maximum number is indicated in the Max LFD Switches the OSD function On/Off. - May not be supported depending on the product. The remote control
  • Samsung 320TSN | User Manual - Page 62
    than COM1 is used, COM1 through COM4 can be selected in the Port Selection Menu. 3. If the exact port name that is connected to the LCD Display using a serial cable is not selected, communication will be unavailable. 4. The selected port is stored in the program and used for the next program
  • Samsung 320TSN | User Manual - Page 63
    Info Grid shows some basic information necessary to System. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Selects displays you want to adjust using the Select button or checkboxes. System allows controlling some of the functions of the selected display. 1) Power On/Off
  • Samsung 320TSN | User Manual - Page 64
    displays whose power status is ON. 3. Selects whether to display the menu screen using the OSD Display menu. 1) Source OSD - Sets whether the the Optimum Mode OSD will be displayed to indicate if the current mode is not supported. 3) No Signal OSD - Sets whether the No Signal OSD will be displayed
  • Samsung 320TSN | User Manual - Page 65
    • PC Mode Info Grid shows some basic information necessary to Input Source Control. 1) PC - Changes the Input Source of the selected display to PC. 2) BNC - Changes the Input Source of the selected display to BNC. 3) DVI - Changes the Input Source of the selected display to DVI. 4) TV - Changes the
  • Samsung 320TSN | User Manual - Page 66
    Input Source is TV. HDMI2 may not be supported depending on the product. DP may not be supported depending on the product. TV Source can be , DP 1. Click Image Size of the main icons and the Image Size control screen appears. Info Grid shows some basic information necessary to Image Size Control. 1)
  • Samsung 320TSN | User Manual - Page 67
    available in the PC, BNC, DVI and DP. DP may not be supported depending on the product. The Input source of MagicInfo works only on MagicInfo as input source. 3) Switch Image Size of the selected display randomly. 4) The screen modes can only be adjusted when a TV (PAL only) is connected and the
  • Samsung 320TSN | User Manual - Page 68
    Time 1. Click Time of the main icons and the Time Control screen appears. Info Grid shows some basic information necessary to Time Control. 1) Set clock - Set the current time for the selected display (PC Time). - To change
  • Samsung 320TSN | User Manual - Page 69
    input source that will be displayed when the selected monitor is turned on. 5) Holiday - Applies the Holiday Management function to the Timer. 6) Repeat - Available selections include Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, and Manual. z Once : The Timer goes off only once. z EveryDay : EveryDay
  • Samsung 320TSN | User Manual - Page 70
    MagicInfo installed when Source is set to MagicInfo in On Time mode. PIP PIP Size 1. Click PIP of the main icons and the PIP control screen appears. Selects displays you want to adjust using the Select button or checkboxes. Info Grid shows some basic information necessary to PIP Size Control. 1) PIP
  • Samsung 320TSN | User Manual - Page 71
    screen appears. Info Grid shows some basic information necessary to PIP Source Control. 1) PIP Source - PIP Source can be controlled with turning on the LCD selected Display to DP. HDMI2 may not be supported depending on the product. DP may not be supported depending on the product. Some of the PIP
  • Samsung 320TSN | User Manual - Page 72
    1. Click Settings of the main icons and the Settings Control screen appears. Basic information required to adjust the Picture is displayed in the main menu. Settings for the selected monitor will be displayed if one of the connected monitors is selected, and the default settings will be displayed if
  • Samsung 320TSN | User Manual - Page 73
    display. HDMI2 may not be supported depending on the product. Brightness Sensor may not be supported depending on the product. The Input are selected by clicking All and Select. If a value is changed in this screen, the current mode will automatically switch to custom mode. 1) Picture PC - Available
  • Samsung 320TSN | User Manual - Page 74
    the selected display. DP may not be supported depending on the product. Brightness Sensor may not be supported depending on the product. The Input source Audio 1. Click Settings of the main icons and the Settings Control screen appears. Basic information required to adjust Audio is displayed in the
  • Samsung 320TSN | User Manual - Page 75
    if no selection is made, the factory default is displayed. Settings Image Lock 1. Click Settings of the main icons and the Settings Control screen appears. Info Grid shows some basic information necessary to Settings Control. 1) Image Lock - Available only for PC, BNC. 2) Coarse - Adjusts Coarse of
  • Samsung 320TSN | User Manual - Page 76
    the Main Icon column to display the Maintenance screen. An "Info Grid" showing several basic supported for models that have a brightness sensor and is only enabled when Ambient Brightness Mode is selected in the Lamp Control menu. Auto Lamp Control and Manual Lamp Control are only enabled when User
  • Samsung 320TSN | User Manual - Page 77
    for a long time. 2) Pixel Shift - This allows the screen to be moved finely at the specified time interval. 3) Safety Screen - The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor for a long time. The Interval item is used to set
  • Samsung 320TSN | User Manual - Page 78
    1) Video Wall - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen. 2) Video Wall Control - Video Wall properties can be configured. 1) On / Off - Turns on/off the Video Wall
  • Samsung 320TSN | User Manual - Page 79
    Screen Divider setting may differ depending on the model. You may not operate this function in MagicInfo. The Input source of TV works only on TV model. The Maintenance Control function is available only for the displays where the power status is ON. Troubleshooting - For monitors that support a Set
  • Samsung 320TSN | User Manual - Page 80
    Settings Value Display In Multiple Display Mode When there are more than one displays connected, the settings values are displayed as follows. 1. No selection: Displays the Factory Default Value. 2. Selected one display: Fetches and displays the settings value for the selected display. 3. Selected
  • Samsung 320TSN | User Manual - Page 81
    Introduction Unlike the previous method which used the serial data communication specifications RS-232C, an Ethe function has been added. Connect the first display device and the PC by entering the IP address. To connect to another
  • Samsung 320TSN | User Manual - Page 82
    Click Start > Program > Samsung > MDC System to start the program. Select a set to see the Tools OSD Display 1. Use the main icons to switch into each screen. 2. You can add a device by entering the IP address configured on the monitor. 3. Allows you to enable or disable the remote control signal
  • Samsung 320TSN | User Manual - Page 83
    displays. 10. Switches the OSD function On/Off. - May not be supported depending on the product. The remote control Enable/Disable function operates closed. Add a Device 1. Enter the IP address of the monitor to be connected and press the Add button to add the IP address click the OK button,
  • Samsung 320TSN | User Manual - Page 84
    Info Grid shows some basic information necessary to System. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Selects displays you want to adjust using the Select All button or checkboxes.
  • Samsung 320TSN | User Manual - Page 85
    or choose "Select All".) The Volume Control and Mute features are available only for the displays whose power s ON. 3. Selects whether to display the menu screen using the OSD Display menu.
  • Samsung 320TSN | User Manual - Page 86
    1) Source OSD - Sets whether the Source OSD will be displayed to indicate when the Source is changed. 2) Not Optimum Mode OSD - Sets whether the Optimum Mode OSD will be displayed to indicate if the current mode is not supp 3) No Signal OSD - Sets whether the No Signal OSD will be displayed to
  • Samsung 320TSN | User Manual - Page 87
    connection status of the connected monito 3) It can automatically check whether DHCP IP is set and then set the IP address. 4) It can automatically or manually set and then apply the IP Address, Subnet and Gateway of the sele Input Source 1) Click Input Source of the main icons and the Input
  • Samsung 320TSN | User Manual - Page 88
    • PC Mode
  • Samsung 320TSN | User Manual - Page 89
    Info Grid shows some basic information necessary to Input Source Control. 1) PC - Changes the Input Source of the selected display to PC. 2) BNC - Changes the Input Source of the selected display to BNC. 3) DVI - Changes the Input Source of the selected display to DVI. 4) TV - Changes the Input
  • Samsung 320TSN | User Manual - Page 90
    Source is TV. HDMI2 may not be supported depending on the product. DP may not be supported depending on the product. The Input Source , DP 1. Click Image Size of the main icons and the Image Size control screen appears. Info Grid shows some basic information necessary to Image Size Control. 1)
  • Samsung 320TSN | User Manual - Page 91
    TV works only on TV model. Image Size Control is available only for the displays for which power status is ON. DP may not be supported depending on the product. Image Size TV, AV, S-Video, Component, DVI(HDCP), HDMI1, HDMI2, DTV 1. Click Image Size of the main icons and the Image
  • Samsung 320TSN | User Manual - Page 92
    , HDMI2 or DTV as in 3) Switch Image Size of the selected display randomly. 4) The screen modes can only be adjusted when a TV (PAL only) is connected and the Image Size item Auto Wide. Custom may not be supported depending on the product. Auto Wide, Zoom1 and Zoom2 are not available for selection
  • Samsung 320TSN | User Manual - Page 93
    Info Grid shows some basic information necessary to Time Control. 1) Clock Set - Set the current time for the selected display (PC Time). - To change the current time, first change the PC Time. 2) Timer - Sets up Timer1, Timer2, Timer3 and Holiday Management. 3) Shows whether Timer is activated. The
  • Samsung 320TSN | User Manual - Page 94
    input source that will be displayed when the selected monitor is turned on. 5) Holiday - Applies the Holiday Management function to the Timer. 6) Repeat - Available selections include Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, and Manual. z Once : The Timer goes off only once. z EveryDay : EveryDay
  • Samsung 320TSN | User Manual - Page 95
    with MagicInfo installed when Source is set to MagicInfo in On mode. PIP PIP Size 1. Click PIP of the main icons and the PIP control screen appears. Selects displays you want to adjust using the Select All button or checkboxes.
  • Samsung 320TSN | User Manual - Page 96
    By Picture) - Turns on the PBP of the selected display and changes the size to Double 3. PIP Size can be controlled with turning on the LCD Display power. The Input source of TV works only on TV model. The Input source of MagicInfo works only on MagicInfo model.
  • Samsung 320TSN | User Manual - Page 97
    PIP PIP Source 1. Click PIP of the main icons and the PIP control screen appears. Info Grid shows some basic information necessary to PIP Source Control. 1) PIP Source - PIP Source can be controlled with turning on the LCD Display power. 2) PC - Changes the source of the PIP of the selected display
  • Samsung 320TSN | User Manual - Page 98
    not be available for selection, depending on the input sour of the Main Screen. The PIP Control feature is available only for the displays whose power status is set to ON. HDMI2 may not be supported depending on the product. DP may not be supported depending on the product. The Input source of
  • Samsung 320TSN | User Manual - Page 99
    monitor will be displayed if one of the connected monitors is selected, and the default settings will b displayed if all monitors are selected by clicking All and Select. If a value is changed in this screen display. Brightness Sensor may not be supported depending on the product. The Input source
  • Samsung 320TSN | User Manual - Page 100
    ID is selected, and the default settings will be displayed if all are selected by clicking All and Select. If a value is changed in this screen, the current mode will aut switch to custom mode. 1) Picture PC - Available only for PC, BNC, DVI and DP. 2) Contrast - Adjusts Contrast of the selected
  • Samsung 320TSN | User Manual - Page 101
    is ON and if no selectio made, the factory default is displayed DP may not be supported depending on the product. Setting Audio 1. Click Settings of the main icons and the Settings Control screen appears. Basic information required to adjust Audio is displayed in the display window. Settings for the
  • Samsung 320TSN | User Manual - Page 102
    is selected, and the default settings w displayed if all display IDs are selected by clicking All and Select. If a value is changed in this screen current mode will automatically switch to custom mode. 1) Audio - Controls audio settings for all input sources. 2) Bass - Adjusts Bass of the selected
  • Samsung 320TSN | User Manual - Page 103
    Info Grid shows some basic information necessary to Settings Control. 1) Image Lock - Available only for PC, BNC. 2) Coarse - Adjusts Coarse of the selected display. 3) Fine - Adjusts Fine of the selected display. 4) Position - Adjusts Position of the selected display. 5) Auto Adjustment - Self-
  • Samsung 320TSN | User Manual - Page 104
    the ambient light intensity. Ambient Light is only supported for models that have a brightness sensor and is only ena when Ambient Brightness Mode is selected in the Lamp Control menu. Auto Lamp Control and Manual Lamp Control are only enabled when User Control Mode selected in the Lamp Control menu
  • Samsung 320TSN | User Manual - Page 105
    display for a long time. 2) Pixel Shift - This allows the screen to be moved finely at the specified time interval. 3) Safety Screen - The Safety Screen function is used to prevent afterimages from occurring when a still screen is display the monitor for a long time. The Interval item is used to set
  • Samsung 320TSN | User Manual - Page 106
    model. Maintenance Video Wall 1. Click on the "Maintenance" icon in the Main Icon column to display the Maintenance screen. 1) Video Wall - A Video Wall is a set of video screens that are connected together, so that each screen shows a p whole picture or so that the same picture is repeated on each
  • Samsung 320TSN | User Manual - Page 107
    The format can be selected to see a divided screen. z Full z Natural 3) Video Wall (Screen divider) - The screen can be divided into. You can select a number of screens with a different layout when dividing. z Select a mode from Screen divider. z Select a display from Display Selection. z The place
  • Samsung 320TSN | User Manual - Page 108
    Screen Divider setting may differ depending on the model. You may not operate this function in MagicInfo. The Input source of TV works only on TV model. The Maintenance Control function is available only for the displays where the power stat Troubleshooting . - For monitors that support a Set ID between
  • Samsung 320TSN | User Manual - Page 109
    selected at the same time by clicking All and Select, the default value will be restored. file://C:\AST\ENG\BN59-01122D-02\BN59-01122D-02\manual... 2011-06-17
  • Samsung 320TSN | User Manual - Page 110
    with an TSn-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to [HDMI IN 2 ( or other external input sources connected to the LCD Display. Use to select the screen of your choice. 1. PC 2. DVI 3. AV 4. Component 5.
  • Samsung 320TSN | User Manual - Page 111
    When external AV devices such as VCRs or DVDs are connected to the LCD Display , PIP allows you to watch video from those devices in a small will not be activated. PIP Turns the PIP Screen Off/On. • Off • On Source Note • PIP is disabled if the primary screen does not receive a signal. • A TV
  • Samsung 320TSN | User Manual - Page 112
    Adjusting the LCD Display Size • PC : DVI / AV / HDMI1 / HDMI2 / DisplayPort • DVI : PC • AV : PC • HDMI : PC • DisplayPort : PC Changes the Size of the PIP window. Position Changes
  • Samsung 320TSN | User Manual - Page 113
    Edit Name Adjusting the LCD Display Name the input device connected to the input jacks to make your input source selection easier. VCR / DVD / Cable STB / HD STB / Satellite STB /
  • Samsung 320TSN | User Manual - Page 114
    Source AutoSwitch Adjusting the LCD Display When the Source AutoSwitch is On, the display video source will automatically be searched for active video. The Primary Source selection will be activated,
  • Samsung 320TSN | User Manual - Page 115
    Adjusting the LCD Display Specify Primary Source for the automatic input source. Secondary Source Specify Secondary Source an TSn-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to [HDMI IN 2 (MAGICINFO)] on the product. Mode
  • Samsung 320TSN | User Manual - Page 116
    the LCD Display Note Not available when Dynamic Contrast is set to On. 1. Information Recommended for communicating exact information (e.g. public information). 2. Advertisement Recommended for displaying advertisements (e.g. videos or indoor or outdoor ads). 3. Custom Custom By using the on-screen
  • Samsung 320TSN | User Manual - Page 117
    Adjusting the LCD Display • Mode 1 Sets the picture brighter than Natural. • Mode 2 Sets the picture darker than Mode 1. • Mode 3 Increases the contrast between dark and bright colors. Color
  • Samsung 320TSN | User Manual - Page 118
    Adjusting the LCD Display 3. Blue Color Temp. Color Temp. is a measure of the 'warmth' in PC mode only. Coarse Fine Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the Center using the horizontal control menu. Removes noise such
  • Samsung 320TSN | User Manual - Page 119
    Auto Adjustment Adjusting the LCD Display The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed. Note Available in PC mode only. Signal Balance This is used to make up for the
  • Samsung 320TSN | User Manual - Page 120
    5. G-Offset 6. B-Offset Size Adjusting the LCD Display The Size can be switched. 1. 16:9 2. 4:3 PIP Picture Adjusts the PIP Screen Settings. Note • Available Modes: PIP On 1. Contrast Adjusts the Contrast of the PIP window on the screen. 2. Brightness Adjusts the Brightness of the PIP window on
  • Samsung 320TSN | User Manual - Page 121
    Adjusting the LCD Display Note PIP input only operates in AV, HDMI, or Component mode. 5. Tint Adds a natural tone to the PIP window. Note PIP input only operates
  • Samsung 320TSN | User Manual - Page 122
    1. Off 2. On Picture Reset Adjusting the LCD Display Reset the screen settings. Picture [ AV / HDMI / TV / Component Mode] Available network box specified by Samsung and connect the MagicInfo output on the network box to [HDMI IN 2 (MAGICINFO)] on the product. The LCD Display has four automatic
  • Samsung 320TSN | User Manual - Page 123
    Adjusting the LCD Display 3. Movie 4. Custom Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. Note Not available when Dynamic Contrast is set to On. Contrast Adjusts the
  • Samsung 320TSN | User Manual - Page 124
    Adjusting the LCD Display The Color tones can be changed. The individual Color components are also user adjustable. Note Not available function is disabled. • Changing a setting in the Color Tone menu will switch the screen mode to Custom. Color Temp. Size Color temp. is a measure of the 'warmth
  • Samsung 320TSN | User Manual - Page 125
    720p, 1080i, 1080p signals are input. 6. Custom - Changes the resolution to suit the user's preferences. Note • Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Screen Fit feature. • Screen Fit is enabled for only 1080i/p in Component mode
  • Samsung 320TSN | User Manual - Page 126
    Adjusting the LCD Display 2. Low Note For Timing which can be used for both the PC and the DTV interlaced scan; it is not available in progressive scan.) 1. Off 2. On PIP Picture Adjusts the PIP Screen Settings. Note Available Modes: PIP On 1. Contrast Adjusts the Contrast of the PIP window on the
  • Samsung 320TSN | User Manual - Page 127
    Dynamic Contrast Adjusting the LCD Display Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. 1. light intensity so that the picture brightness can automatically be adjusted. 1. Off 2. On Picture Reset Reset the screen settings.
  • Samsung 320TSN | User Manual - Page 128
    To use MagicInfo with an TSn-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to [HDMI IN 2 (MAGICINFO)] on the product. The LCD Display has a built-in high fidelity stereo amplifier. 1. Standard Selects Standard for the
  • Samsung 320TSN | User Manual - Page 129
    Adjusting the LCD Display Custom The sound settings can be adjusted to suit your personal preferences. 2. On SRS TS XT SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround XT delivers a compelling, virtual surround sound
  • Samsung 320TSN | User Manual - Page 130
    Adjusting the LCD Display experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1. Off 2. On Sound Select Enable
  • Samsung 320TSN | User Manual - Page 131
    the LCD Display Setup Available Modes • PC / DVI / DisplayPort • AV • Component • HDMI • MagicInfo • TV Note To watch TV on the product, connect a TV tuner box (sold separately). Using MagicInfo To use MagicInfo with an TSn-3 model, install inside the product a network box specified by Samsung and
  • Samsung 320TSN | User Manual - Page 132
    at certain times. 1. Off 2. 30 3. 60 4. 90 5. 120 6. 150 7. 180 Timer1 / Timer2 / Timer3 You can set the LCD display to automatically turn on or off at a specified time. Note • Only enabled when the clock is set using the Clock Set menu. • The Manual option allows you to select a day of the week.
  • Samsung 320TSN | User Manual - Page 133
    Adjusting the LCD Display • Holiday : When choose Apply, timer is not available on holiday; when choose Don't apply, timer is available on holiday. Holiday Management • Add You can
  • Samsung 320TSN | User Manual - Page 134
    of the background of the OSD. 1. High 2. Medium 3. Low 4. Opaque Safety Lock Change PIN The password can be changed. The preset password for the LCD Display is "0000". Note If you forgot your password, press the remote buttons INFO EXIT MUTE to reset the password to "0000." Lock On This
  • Samsung 320TSN | User Manual - Page 135
    Energy Saving Adjusting the LCD Display This feature adjusts the power consumption of the unit in order to save energy. 1. Off 2. On Video Wall A Video Wall is a set of video screens connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on
  • Samsung 320TSN | User Manual - Page 136
    Adjusting the LCD Display • Full Provides a full screen without any margins. • Natural Displays a natural image with the original aspect ratio intact. Horizontal Sets how many parts the screen should be divided horizontally. Fifteen adjustment levels: 1~15. Note If Vertical is set to 15, the maximum
  • Samsung 320TSN | User Manual - Page 137
    LCD Display • Select a mode in Screen Position. • Select a display in Display Selection. • The selection will be set up by pressing a number in the selected mode. • The screen can be split into a maximum of 100 sub-screens. Note When more than four displays are connected, we recommend a resolution
  • Samsung 320TSN | User Manual - Page 138
    Vertical Adjusting the LCD Display Time Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4. Set the time interval for performing the horizontal or vertical movement, respectively. Timer Timer You can set the timer for Screen Burn Protection. If you start
  • Samsung 320TSN | User Manual - Page 139
    Adjusting the LCD Display You can change the Safety Screen Type. • Bar • Eraser • Pixel Period Time Use this function to set the execution period for each mode set in the timer. Bar Within the set period of time specify a time for execution. This function prevents after-images on the screen by
  • Samsung 320TSN | User Manual - Page 140
    the LCD Display Pixel This function prevents after-images on the screen by moving a rectangular pattern. This function prevents after-images by moving many pixels on the screen. Side Gray Select the brightness of the grey for the screen background. • OFF • Light • Dark Resolution Select
  • Samsung 320TSN | User Manual - Page 141
    Adjusting the LCD Display 60Hz or 1366 x 768 @ 60Hz, by using this function(Resolution Select), you can have the picture displayed on the screen in the specified resolution. Note Available in PC mode only. 1. Off 2. 1024 X 768 3. 1280 X 768 4. 1360 x 768 5. 1366 X 768 Note Selecting the menu is only
  • Samsung 320TSN | User Manual - Page 142
    the LCD Display Fan & Temperature Protects the product by detecting the fan speed and internal temperature. Fan Control Selects auto or manual for the fan speed settings. • Auto • Manual Fan Speed Setting Sets the fan speed within a range of 0 and 100. Note Enabled when Fan Control is set to Manual
  • Samsung 320TSN | User Manual - Page 143
    Adjusting the LCD Display Refer to "Specifications" herein for details about operating conditions. • It is best to set Fan Control to Auto when you change power on automatically as soon as it is connected to power. Button Lock Locks or unlocks the monitor control buttons on the product. • Off • On
  • Samsung 320TSN | User Manual - Page 144
    User Auto Color Adjusting the LCD Display 1. Auto Color Automatically adjusts the Colors. 2. Reset Resets the Color settings. Note Enabled only in PC mode. Standby Control Sets the standby mode, which
  • Samsung 320TSN | User Manual - Page 145
    Lamp Schedule Adjusting the LCD Display Adjusts the luminance to a user-specified value at a specified time. OSD Display Displays or hides a menu item on the screen. Source OSD • Off • On Not Optimum Mode OSD • Off • On No Signal OSD
  • Samsung 320TSN | User Manual - Page 146
    On MDC OSD Adjusting the LCD Display • Off • On Software Upgrade Performs a software upgrade. 1. Connect the product to a computer via a digital signal such as DVI or HDMI. Click the BMP image file converted from an SW code. The image below will appear on the screen of the product. 2. While a BMP
  • Samsung 320TSN | User Manual - Page 147
    Adjusting the LCD Display Note • This only operates with a digital signal, such as in DVI, HDMI1, or HDMI2 mode. (The input resolution must be identical to the panel resolution.) • In HDMI1 and HDMI2 modes, the timing values used for both the PC and TV are only supported if the Edit Name is set to
  • Samsung 320TSN | User Manual - Page 148
    Adjusting the LCD Display Using MagicInfo To use MagicInfo with an TSn-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to [HDMI IN 2 (MAGICINFO)] on the product. Multi Control Assigns an individual ID to the SET. •
  • Samsung 320TSN | User Manual - Page 149
    highly recommended not to turn off the AC power during an operation. • For pivoted LCD Displays, ticker transparency is not supported. • For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for movies. • For drive D:, EWF is not applied. • To save Setup contents that have
  • Samsung 320TSN | User Manual - Page 150
    Adjusting the LCD Display You can select an Application to be executed in your computer when Windows starts. 2. Select TCP/IP - step 2 In step 2 of MagicInfo Setup Wizard,
  • Samsung 320TSN | User Manual - Page 151
    Adjusting the LCD Display When using multiple languages, you can choose and set a specific language among them. 4. Select Screen Type - step 4 You can select which rotation type will be applied to your device. 5. Setup Information
  • Samsung 320TSN | User Manual - Page 152
    Adjusting the LCD Display Shows the settings that have been selected by the user. Note If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo icon on the window desktop. The icon will appear.
  • Samsung 320TSN | User Manual - Page 153
    than 85Hz, you will see the black screen because the LCD Display does not support over 85Hz. Note Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported by the LCD Display. Maintenance and Cleaning 1) Maintaining the LCD Display Case. Clean with a soft cloth after
  • Samsung 320TSN | User Manual - Page 154
    the Adaptor(video). 4. Check if the scanning ratio of the video screen is set to between 56 Hz ~ 85 Hz. (Do not exceed 60Hz when using the maximum resolution.) 5. If you have problems in installing the Adaptor (video) driver, boot the computer in Safe Mode, remove the Display Adaptor in the
  • Samsung 320TSN | User Manual - Page 155
    Troubleshooting A: Check if the signal cable between the computer and the LCD Display is securely connected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: The screen is blank and the power indicator
  • Samsung 320TSN | User Manual - Page 156
    Troubleshooting Q: The screen Color is inconsistent. A: Adjust the Color Control option in the screen is blank and the power indicator light blinks every 0.5 or 1 seconds. A: The LCD Display is using its power management system. Press any key on the key- board. Problems related to Audio Note Problems
  • Samsung 320TSN | User Manual - Page 157
    by reconfiguring the video card. Note That video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) Q: How can I adjust the resolution? A: Windows XP: Set the resolution in the Control Panel Appearance and Themes Display
  • Samsung 320TSN | User Manual - Page 158
    Specifications General General Model Name 320TSn-3 LCD Panel Size Display Area 31.5 inch / 80cm 697.68 mm(H) x 392.25 mm(V) Synchronization Horizontal Vertical 30~81 kHz 56~85 Hz Display Color 16.7M (true) Resolution Optimum resolution Maximum resolution 1366 x 768 @ 60Hz 1920 x 1080 @
  • Samsung 320TSN | User Manual - Page 159
    be seen. This is not from bad quality and you can use it without any problems. For example, the number of TFT-LCD sub pixels contained in this product are 3,147,264. Note Design and specifications are subject to change without prior notice. Class A (Information Communication equipment for industrial
  • Samsung 320TSN | User Manual - Page 160
    State Power Indicator Power Consumption (Typical) Specifications Normal Op- Power sav- Power off eration , the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows
  • Samsung 320TSN | User Manual - Page 161
    Specifications Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is
  • Samsung 320TSN | User Manual - Page 162
    screen if the best picture quality is not provided for TFTLCD. • Resolution: 1366 x 768 • Vertical frequency (refresh rate): 60 Hz TFT-LCD it without any problems. • For example, the number of TFT-LCD sub pixels contained in this product are 3,147,264. When cleaning the monitor and the panel outside
  • Samsung 320TSN | User Manual - Page 163
    , or Power Save Mode • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one Color or a moving image is recommended. • The Image Retention Free function applied to the
  • Samsung 320TSN | User Manual - Page 164
    use. • The best way to protect your monitor from Image retention is to turn the Power off, or set your PC or System to operate a Screen Saver Program when you are not using it. If these guidelines are not followed, it may affect your warranty. Apply the Screen Pixel function on Product • Apply the
  • Samsung 320TSN | User Manual - Page 165
    Information • Apply the Screen Erasing function - Symptom: 2 Vertical blocks move while erasing the display
  • Samsung 320TSN | User Manual - Page 166
    or comments relating to Samsung products, please contact the SAMSUNG customer care Center. CANADA MEXICO U.S.A North America 1-800-SAMSUNG (726-7864) http://www.samsung.com 01-800-SAMSUNG (726-7864) http://www.samsung.com 1-800-SAMSUNG (726-7864) http://www.samsung.com ARGENTINA BRAZIL Latin
  • Samsung 320TSN | User Manual - Page 167
    LATVIA ESTONIA TURKEY 0700 SAMSUNG (0700 726 http://www.samsung.com 7864) 0800 - SAMSUNG (0800-726 http://www.samsung.com/sk 786) 902 - 1 - SAMSUNG (902 172 http://www.samsung.com 678) 0771 726 7864 (SAMSUNG) http://www.samsung.com 0848 - SAMSUNG (7267864, http://www.samsung.com/ch CHF 0.08
  • Samsung 320TSN | User Manual - Page 168
    -327-527 1800-88-9999 1-800-10-SAMSUNG (726-7864) http://www.samsung.com http://www.samsung.com http://www.samsung.com 1-800-3-SAMSUNG (726-7864) 1-800-8-SAMSUNG (726-7864) 02-5805777 1800-SAMSUNG (726-7864) http://www.samsung.com 1800-29-3232 http://www.samsung.com 02-689-3232 0800-329-999
  • Samsung 320TSN | User Manual - Page 169
    for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for the Plug & Play function. The number of horizontal and vertical dots used to compose the screen image is called the 'resolution'. This number
  • Samsung 320TSN | User Manual - Page 170
    screen. Example: If the resolution is 1366 x 768, this means the screen is composed of 1366 horizontal dots (horizontal resolution) and 768 vertical lines (vertical resolution the battery, manual or packaging user replaceable. For information on its replacement, please contact your service provider.
  • Samsung 320TSN | User Manual - Page 171
    herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPM and DDC
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
SyncMaster 320TSn-3
LCD Display
User Manual
The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.