Samsung 400BX User Manual

Samsung 400BX Manual

Get Samsung 400BX PDF manuals and user guides View all Samsung 400BX manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung 400BX manual content summary:

  • Samsung 400BX | User Manual - Page 1
    User Manual 400BX The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
  • Samsung 400BX | User Manual - Page 2
    without notice to improve quality. © 2011 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of
  • Samsung 400BX | User Manual - Page 3
    the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable
  • Samsung 400BX | User Manual - Page 4
    (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates instructions are not followed. Personal injury or damage to properties may result if instructions are not followed. Activities marked by this symbol are prohibited. Instructions
  • Samsung 400BX | User Manual - Page 5
    Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. z An electric shock or fire may result. Do not use multiple
  • Samsung 400BX | User Manual - Page 6
    while the product is being used. z The product may become damaged by an electric shock. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. ! z A fire or electric shock may result. Keep the power socket where the power cord is connected
  • Samsung 400BX | User Manual - Page 7
    Before Using the Product Keep the plastic packaging out of the reach of children. z Children may suffocate. ! Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) z The product may fall and become damaged and/or cause an injury. z Using the
  • Samsung 400BX | User Manual - Page 8
    product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train SAMSUNG station where the product should operate continuously for an extended period of ! time) may seriously affect its performance. z Be sure to consult
  • Samsung 400BX | User Manual - Page 9
    Before Using the Product Cleaning Warning Disconnect the power cord before cleaning. z An electric shock or fire may result. ! Do not spray water directly on the product when cleaning. z Do not expose the product to water or get the product wet. z A fire, electric shock, or product defect may
  • Samsung 400BX | User Manual - Page 10
    harmed. If the product is dropped or the outer case is damaged, turn off the power switch and disconnect the power cord. Then contact Samsung Customer Service Center. z Continued use can result in a fire or electric shock. Do not leave heavy objects or items that children like (toys, sweets, etc
  • Samsung 400BX | User Manual - Page 11
    Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Center. z Product failure, an electric shock or fire may result. Do not place objects containing liquid (vases, pots, bottles, etc) or
  • Samsung 400BX | User Manual - Page 12
    shock or electric leakage. Use the product at the recommended resolution and frequency. z Your eyesight may deteriorate. Do not hold the monitor upside-down or move it by holding the stand. z The product may fall and become damaged or cause an injury. Looking at the screen too close for an extended
  • Samsung 400BX | User Manual - Page 13
    Before Using the Product Exercise caution when adjusting the product angle or stand height. z Your hand or finger may get stuck and injured. ! z Tilting the product at an excessive angle may cause the product to fall and an
  • Samsung 400BX | User Manual - Page 14
    Packaging Checking the Components Parts Frontal Sensor Reverse Side Anti-theft Lock Remote Control Before Installing the Product (Installation Guide) Tilting Angle and Rotation Ventilation Product Blueprint VESA Bracket (hanger) Installation VESA Bracket (hanger) Installation Remote Control Cable
  • Samsung 400BX | User Manual - Page 15
    MDC Program Installation/Uninstallation Installation Uninstallation Using the MDC Program (Serial MDC) Starting MDC Configuring Settings for Main Functions Troubleshooting Guide How display properties are shown when multiple displays are used SCREEN 94 ADJUSTMENT 94 96 96 Mode Changing the Picture
  • Samsung 400BX | User Manual - Page 16
    Table Of Contents 99 Color Tone 99 Configuring the Color Tone Settings 101 Color Control 101 Configuring the Color Control Settings 102 Color Temp. 102 Configuring the Color Temp. Settings 103 Image Lock 103 Configuring the Image Lock Settings 104 Auto Adjustment 104 Configuring the Auto
  • Samsung 400BX | User Manual - Page 17
    Table Of Contents 116 Custom 116 Configuring the Custom Settings 117 Auto Volume 117 Changing the Auto Volume Setting 118 SRS TS XT 118 Setting SRS TS XT 119 Sound Reset 119 Resetting Sound Settings (Sound Reset) SETTINGS 120 120 121 121 122 123 124 125 125 126 126 127 128 128 129 129 130 131 132
  • Samsung 400BX | User Manual - Page 18
    146 Resetting All Settings (Reset All) TROUBLESHOOTI 147 NG GUIDE 147 147 148 151 Requirements Before Contacting Samsung Customer Service Center Testing the Product Checking the Resolution and Frequency Check the followings. Q & A SPECIFICATIONS 153 General 155 PowerSaver 18 Table Of Contents
  • Samsung 400BX | User Manual - Page 19
    Table Of Contents 156 Preset Timing Modes APPENDIX 158 162 162 163 166 168 168 168 Contact SAMSUNG WORLDWIDE Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality Prevention of Afterimage Burn-in Terminology Correct Disposal - Europe only Correct Disposal of
  • Samsung 400BX | User Manual - Page 20
    1 Preparations 1.1 Checking the Contents 1.1.1 Removing the Packaging 1 Remove the black locking device at the bottom of the box. 1 2 3 2 Using the grooves in the box, lift and remove the top of the box. 3 Check the components and remove the Styrofoam and plastic bag. The appearance of actual
  • Samsung 400BX | User Manual - Page 21
    separately may differ from the image shown. Components Components may differ in different locations. Quick setup guide Warranty card (Not available in all locations) User manual Power cord  D-SUB cable  Batteries (Not available in all locations) Items sold separately The following items
  • Samsung 400BX | User Manual - Page 22
    1 Preparations TV tuner box 1.2 Parts 1.2.1 Frontal Sensor z The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. z This product can only be controlled by using the remote control. Sensor Power lamp Remote sensor
  • Samsung 400BX | User Manual - Page 23
    color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. POWER IN POWER OUT] port to a TV tuner box specified by Samsung. Otherwise, the product performance may be affected. Connects to an MDC using the RS232C cable 23
  • Samsung 400BX | User Manual - Page 24
    allows you to use the product securely even in public places. z The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: 1 Fix the cable of your anti-theft locking
  • Samsung 400BX | User Manual - Page 25
    Display or hide the onscreen display menu when the input source is TV. Not enabled on this product. POWER OFF .QZ 1 GHI 4 PRS 7 DEL -/-- - GUIDE ABC DEF 23 JKL MNO 56 TUV WXY 89 SYMBOL ENTER 0 PRE-CH MUTE VOL SOURCE CH/P D.MENU MENU TV RETURN TOOLS Display information about
  • Samsung 400BX | User Manual - Page 26
    1 Preparations Adjusting the OSD with the Remote Control 1. Open the OSD menu. MENU 2. Select from Input, Picture, Sound, Setup or Multi Control in the displayed OSD menu screen. 3. Change settings as desired. 4. Finish setting. 5. Close the onscreen display (OSD) menu. EXIT To place batteries in
  • Samsung 400BX | User Manual - Page 27
    1 Preparations Remote Control Reception Range 7m ~ 10m Û Û Use the remote control within 7m to 10m from the sensor on the product at an angle of 30˚ from the left and right. z Store used batteries out of reach of children and recycle. z Do not use a new and used battery together. Replace
  • Samsung 400BX | User Manual - Page 28
    with the installation instructions. z Ensure that an authorized installation company installs the wall mount. z Otherwise, it may fall and cause personal injury. z Make sure to install the specified wall mount. 1.3.1 Tilting Angle and Rotation Contact Samsung Customer Service Center for further
  • Samsung 400BX | User Manual - Page 29
    1 Preparations 1.3.2 Ventilation 1. Installation on a Perpendicular Wall A Minimum 40 mm B Ambient temperature: Under 35 C z When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface for ventilation and ensure that the ambient A
  • Samsung 400BX | User Manual - Page 30
    1 Preparations 2. Installation on an Indented Wall Contact Samsung Customer Service Center for further details. B D D A C E Plane view A Minimum 40 mm B Minimum 70 mm C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C Figure 1.2 Side view When installing the product on an
  • Samsung 400BX | User Manual - Page 31
    1 Preparations 1.3.3 Product Blueprint 969.0 91.0 888.8 501.4 582.0 31 1 Preparations
  • Samsung 400BX | User Manual - Page 32
    of 6 mm and a length of 8 mm to 12 mm to install the bracket on a wall. Installing a Bracket z The bracket must be installed by a qualified technician. z Samsung is not held responsible for any damage to the product or injuries sustained as a result of the product being installed by an unqualified
  • Samsung 400BX | User Manual - Page 33
    1 Preparations Components Be sure to use only the components and parts provided with your bracket for installation. Bracket x 1 Hinge x 2 (left Plastic piece Screw A x 11 Screw B x 4 Anchor x 11 and right) x 4 Fixing the main unit to the bracket: The appearance of the main unit may differ from
  • Samsung 400BX | User Manual - Page 34
    1 Preparations 3 Firmly fasten the 4 screws (B) combined with the plastic pieces at step 2 to the back of the main unit. 4 Remove the safety pin (3). Fit the 4 holders on the main unit in the grooves in the bracket, and lower (1) and securely hang the main unit on the bracket (2). Fasten the safety
  • Samsung 400BX | User Manual - Page 35
    1 Preparations Adjusting the Wall-mounted Product Angle 1 Fix the main unit to the bracket. Û Û Adjust the bracket angle to -2 before you fix the bracket on the wall. 2 Hold and pull the top and center of the main unit fixed on the bracket towards you as shown below to adjust the
  • Samsung 400BX | User Manual - Page 36
    1 Preparations 1.5 Remote Control 1.5.1 Cable Connection Interface Pin Bit rate Data bits Parity Stop bit Flow control Maximum length RS232C (9 pins) TxD (No. 2), RxD (No. 3), GND (No. 5) 9600 bps 8 bit None 1 bit None 15m (only shielded type) z Pin assignment 12345 6789 Pin 1 2 3 4 5 6 7 8
  • Samsung 400BX | User Manual - Page 37
    1 Preparations z RS232C cable Connector: 9-pin D-Sub Cable: Cross (reversed) cable 95 5 9 6 1 1 6 -P1- -P1- Female Rx 2 Tx 3 Gnd 5 z Connection -P2- -P2- 3 Rx Female 2 Tx 5 Gnd RS232C IN 37 1 Preparations
  • Samsung 400BX | User Manual - Page 38
    1 Preparations 1.5.2 Control Codes Viewing control state (Get control command) Header Command 0xAA Command ID type Controlling (Set control command) Data length 0 Checksum Header Command Data length Data 0xAA Command ID type 1 Value Checksum Command No. 1 2 3 4 5 6 7 8 9
  • Samsung 400BX | User Manual - Page 39
    IDs, set the ID as "0xFE" and transmit commands. Commands will be executed by each device but ACK will not respond. Power control z Function A TV/monitor can be powered on and off using a PC. z Viewing power state (Get Power ON / OFF Status) Header Command Data length ID Checksum 0xAA 0x11
  • Samsung 400BX | User Manual - Page 40
    volume of a TV/monitor can be adjusted using "Volume": Volume value code to be set on a TV/monitor (0-100) z Ack Checksum Header Comma nd Data length ID " Checksu m "Volume": Volume value code to be set on a TV/monitor (0-100) z Nak Header Comma Data length nd ID 0xAA 0xFF 3 Ack/
  • Samsung 400BX | User Manual - Page 41
    " "Input Source": An input source code to be set on a TV/monitor 0x14 0x1E 0x18 0x0C 0x04 0x08 0x20 0x1F 0x30 0x40 0x21 0x22 0x23 0x24 Set command. They only respond to "Get" commands. † This model does not support BNC, S-Video, HDMI1, HDMI1_PC, HDMI2, HDMI2_PC, and Display ports. † MagicInfo
  • Samsung 400BX | User Manual - Page 42
    length ID 0xAA 0xFF 3 Ack/Nak 'A' r-CMD 0x14 Val1 "Input Source" Checksu m "Input Source": An input source code to be set on a TV/monitor z Nak Header Comma Data length nd ID 0xAA 0xFF 3 Ack/Nak 'N' r-CMD 0x14 Val1 "ERR" Checksu m "ERR" : A code showing what error has occurred
  • Samsung 400BX | User Manual - Page 43
    0x0B 16 : 9 Zoom Wide Zoom 4 : 3 z Ack Header Comma nd Data length ID 0xAA 0xFF 3 Ack/Nak 'A' "Screen Mode": A code that sets the TV/monitor status z Nak Header Comma nd ID 0xAA 0xFF Data length 3 Ack/Nak 'N' "ERR" : A code showing what error has occurred r-CMD 0x18 Val1 "Screen
  • Samsung 400BX | User Manual - Page 44
    0xAA 0x19 0 z Ack Header Comma nd Data length ID 0xAA 0xFF 3 Ack/Nak 'A' r-CMD 0x19 Val1 "Screen Size" Checksu m "Screen Size": TV/monitor screen size (range: 0 - 255, unit: inch) z Nak Header Comma Data length nd ID 0xAA 0xFF 3 Ack/Nak 'N' r-CMD 0x19 Val1 "ERR" Checksu
  • Samsung 400BX | User Manual - Page 45
    Comma Data length nd ID 0xAA 0xFF 3 Ack/Nak 'A' r-CMD 0x3C Val1 "PIP" Checksu m "PIP": A code used to turn the PIP mode of a TV/monitor on or off z Nak Header Comma Data length nd ID 0xAA 0xFF 3 Ack/Nak 'N' r-CMD 0x3C Val1 "ERR" Checksu m "ERR" : A code showing what error
  • Samsung 400BX | User Manual - Page 46
    1 Preparations Auto adjustment control (PC and BNC only) z Function Automatically adjust the PC system screen using a PC. z Viewing auto adjustment state (Get Auto Adjustment Status) z Setting auto adjustment (Set Auto Adjustment) Header Command Data length Data 0xAA 0x3D ID 1 "Auto
  • Samsung 400BX | User Manual - Page 47
    CMD Val1 nd Checksu ID "Video Wall m 0xAA 0xFF 3 'A' 0x5C Mode" "Video Wall Mode": A code used to activate Video Wall mode on a TV/monitor z Nak Header Comma nd ID 0xAA 0xFF Data length 3 Ack/Nak 'N' "ERR" : A code showing what error has occurred r-CMD 0x5C Val1 "ERR" Checksu
  • Samsung 400BX | User Manual - Page 48
    "Safety Lock" Checksu m Header Comma nd ID 0xAA 0xFF Data length 3 Ack/Nak 'A' "Safety Lock": Safety lock code to be set on a TV/monitor z Nak r-CMD 0x5D Val1 "Safety Lock" Checksu m Comma Header nd Data length Ack/Nak r-CMD Val1 Checksu ID m 0xAA 0xFF 3 'N' 0x5D "ERR" "ERR
  • Samsung 400BX | User Manual - Page 49
    top boxes and DVD/Blu-ray Disc players. Computer Camcoder Audio Settop box DVD 2.1.1 Pre-connection Checkpoints z Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. z Do not connect the
  • Samsung 400BX | User Manual - Page 50
    2 Connecting and Using a Source Device 2.2 Connecting and Using a PC 2.2.1 Connecting to a PC z A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection using the D-SUB cable (analogue
  • Samsung 400BX | User Manual - Page 51
    type) DVI IN AUDIO IN 1 Connect a DVI cable to the [DVI IN] port on the monitor and the DVI port on the PC. 2 Connect a sound output cable to the [AUDIO IN] AUDIO IN 1 Connect an HDMI-DVI cable to the [DVI IN] port on the monitor and the HDMI port on the PC. 2 Connect a sound output cable to the [
  • Samsung 400BX | User Manual - Page 52
    the provided files are faulty, go to the Samsung homepage (http://www.samsung.com/sec) and download the files. 1 Insert the user manual CD provided with the product into the CD-ROM drive. 2 Click "Windows Driver." 3 Follow the instructions given on the screen to proceed with installation. 4 Select
  • Samsung 400BX | User Manual - Page 53
    the Resolution Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel ĺ Display ĺ Settings, and change the
  • Samsung 400BX | User Manual - Page 54
    2 Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel ĺ Personal Settings ĺ Display Settings, and change the resolution. 54 2 Connecting and Using a Source Device
  • Samsung 400BX | User Manual - Page 55
    2 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel ĺ Display ĺ Screen Resolution, and change the resolution. 55 2 Connecting and Using a Source Device
  • Samsung 400BX | User Manual - Page 56
    2 Connecting and Using a Source Device 2.3 Connecting to a Video Device z You can connect a video device to the product using a cable. Connecting parts may differ in different products. 2.3.1 Connection Using the AV Cable AV IN AUDIO IN 1 Connect the AV cable to the [AV IN] port on the product and
  • Samsung 400BX | User Manual - Page 57
    2 Connecting and Using a Source Device 2.3.2 Connection Using the RGB-component Cable AUDIO IN RGB / COMPONENT IN 1 Connect the RGB-component cable to the [RGB/COMPONENT IN] port on the product and the matching-colored component ports on the video device. 2 Connect the RCA stereo cable to the [AUDIO
  • Samsung 400BX | User Manual - Page 58
    to the product using an HDMI-DVI cable, set Edit Name to DVI Device to access video and audio content stored on the video device. z Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p. 58 2 Connecting and Using a Source Device
  • Samsung 400BX | User Manual - Page 59
    to a TV Tuner Box (US Only) TV tuner boxes are sold separately. Contact Samsung Customer Service Center for enquiries on the purchase and installation of a TV tuner box. DC OUT (5V/2.5A) DVI IN 1 Refer to the quick installation guide provided with your TV tuner box when you connect the tuner box to
  • Samsung 400BX | User Manual - Page 60
    2 Connecting and Using a Source Device 2.5 Connecting and Using a Source Device 2.5.1 Source List/Edit Name Source List allows you to select a variety of sources and change source device names. Source List You can display the screen of a source device connected to the product. Select a source
  • Samsung 400BX | User Manual - Page 61
    2 Connecting and Using a Source Device Edit Name z You can rename a connected source device. Sometimes the screen will not display properly unless the name of a source device is specified in Edit Name. In addition, it is best to rename the source device in Edit Name to obtain optimal picture
  • Samsung 400BX | User Manual - Page 62
    2 Connecting and Using a Source Device 5 Press / to move to the source device you want and press [ ]. The name of the selected source device will be displayed as shown below. Edit Name P C : AV Receiver D V I : - - - - A V : - - - - C o m p o n e n t : - - - - M o v e E n t e r R e
  • Samsung 400BX | User Manual - Page 63
    2 Connecting and Using a Source Device Source AutoSwitch Settings z Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. If the display TV source is active
  • Samsung 400BX | User Manual - Page 64
    2 Connecting and Using a Source Device z Primary Source Specify Primary Source for the automatic input source. Pr i m a r y S o u r c e P C D V I A V C o m p o n e n t A l l M o v e E n t e r R e t u r n Press / to select the option you want and press [ ]. z Secondary Source Specify Secondary
  • Samsung 400BX | User Manual - Page 65
    3 Using MDC MDC (Multiple Display Control) is an application that allows you to easily control multiple display devices simultaneously using a PC. 3.1 Configuring Settings for Multi Control Assign an individual ID to your product. 3.1.1 Configuring settings for Multi Control This product can only
  • Samsung 400BX | User Manual - Page 66
    shortcut icon will be created on the desktop after installation. z The MDC execution icon may not be displayed depending on the PC system or product specifications. z Press F5 if the execution icon is not displayed. z This product does not support Ethernet MDC. 66 3 Using MDC
  • Samsung 400BX | User Manual - Page 67
    3 Using MDC 3.3.2 Uninstallation 1 Select Settings > Control Panel on the Start menu and double-click Add/Delete Program. 2 Select MDC System from the list and click Change/Remove. MDC installation can be affected by the graphics card, mother board and network conditions. 67 3 Using MDC
  • Samsung 400BX | User Manual - Page 68
    232C serial cable to the serial ports on the PC and display. 3.4.1 Starting MDC To start the MDC program, click Start>Programs>Samsung>MDC System>MDC System. Menu Bar 1 2 3 4 1 Remote Control z Enable the remote control signal reception function. z Enable-Disable 2 Safety Lock z Lock the on
  • Samsung 400BX | User Manual - Page 69
    COM3 - COM4 The default port is COM1. 4 Lamp Control z Change the lamp control mode. z User Control Mode - Ambient Brightness Mode 5 Options... z Change the number of IDs and the refresh frequency for functions are set. z Become familiar with the above instructions for efficient use. 69 3 Using MDC
  • Samsung 400BX | User Manual - Page 70
    3 Using MDC 3.4.2 Configuring Settings for Main Functions System Click "System" to configure preferences. - The System screen is the same as the main screen. Displaying the information about connected displays 1 23 4 5 6 7 8 1 : Check a checkbox to select a display. 2 ID : View the ID
  • Samsung 400BX | User Manual - Page 71
    3 Using MDC Configuring preferences for a connected display device 1 2 3 4 1 Power On, Power Off : Power on or off a display. 2 Volume : Control the volume using the volume bar. 3 : Mute or unmute the sound. 4 OSD Display z Source OSD : Select whether to display an indicator window when the
  • Samsung 400BX | User Manual - Page 72
    HDMI1/HDMI2 DP Channel PC mode O O O O O O O O @ O O X TV mode O O O O O O O O @ O O O@ O: Convertible X: Not convertible @ : Available input sources vary depending on the connected device model. Check that your displays support the input sources. 72 3 Using MDC
  • Samsung 400BX | User Manual - Page 73
    the changes to using the select window above. z Only displays connected in PC, DVI mode will be displayed on the left. z Some products may not support DP mode. z Magicinfo only functions on products that have the MagicInfo function. z TV is only enabled on products that have the TV function. 73
  • Samsung 400BX | User Manual - Page 74
    3 Using MDC When connected in TV, AV, Component, DVI(HDCP) or DTV mode: Click Video Source and change the aspect ratio. You can specify Image Size and Screen Mode. Image Size z Auto Wide - 16 : 9 - Wide Zoom - Zoom - Zoom 1 - Zoom 2 - 4 : 3 - Screen Fit - Wide Fit - Custom Screen Mode z 16 : 9 -
  • Samsung 400BX | User Manual - Page 75
    3 Using MDC Time Click "Time" to configure preferences. Clock Set z Select a display and change the time. z Time is automatically set to the time set on the PC by default. z To change the time on displays, change the time set on the PC first. Timer Set Timer1, Timer2, Timer3, and Holiday Management.
  • Samsung 400BX | User Manual - Page 76
    : Activate the timer from Monday through Friday. † Mon~Sat : Activate the timer from Monday through Saturday. † Sat~Sun : Activate the timer on Saturdays and Sundays. † Manual : Customize days of the week. 76 3 Using MDC
  • Samsung 400BX | User Manual - Page 77
    3 Using MDC z Configuring Preferences for Holiday Management Holiday Management can be used to set the display not to turn on by the Timer on specified dates. 1 Specify the dates. 2 Delete All Delete all the holiday schedules. 3 Add Add a holiday schedule (dates). 4 Delete a holiday schedule. z
  • Samsung 400BX | User Manual - Page 78
    3 Using MDC PIP Click "PIP" to configure preferences. Not available on this product. PIP Size OFF - Large - Small - Double 1 - Double 2 - Double 3 z Changes to PIP Size will only be applied to the displays that are powered on. z Magicinfo only functions on products that have the MagicInfo function.
  • Samsung 400BX | User Manual - Page 79
    Changes will only be applied to the displays that are turned on and have PIP mode enabled. z Some products may not support HDMI2 mode. z Some products may not support DP mode. z Available PIP Source options vary depending on the type of Input Source. z Magicinfo only functions on products that have
  • Samsung 400BX | User Manual - Page 80
    3 Using MDC Settings Click "Settings" to configure preferences. Picture 1 2 3 4 5 6 7 8 9 10 To view the settings for each connected display, select a display one at a time. Selecting all displays by clicking All+Select will display the default values. Changing any setting in this menu will
  • Samsung 400BX | User Manual - Page 81
    that are powered on. If no display is selected, the factory default values will be displayed. z Some products may not support HDMI2 mode. z Some products may not support Brightness Sensor mode. z Color Temp is enabled when Color Tone is set to Off. z Magicinfo only functions on products that
  • Samsung 400BX | User Manual - Page 82
    3 Using MDC Picture PC 1 2 3 4 5 6 7 8 9 10 To view the settings for each connected display, select a display one at a time. Selecting all displays by clicking All+Select will display the default values. Changing any setting in this menu will automatically switch the mode to Custom. 1 Picture PC
  • Samsung 400BX | User Manual - Page 83
    displays that are powered on. If no display is selected, the factory default values will be displayed. z Some products may not support DP mode. z Some products may not support Brightness Sensor mode. z Color Temp is enabled when Color Tone is set to Off. z Magicinfo only functions on products that
  • Samsung 400BX | User Manual - Page 84
    3 Using MDC Audio 1 2 3 4 5 6 To view the settings for each connected display, select a display one at a time. Selecting all displays by clicking All+Select will display the default values. Changing any setting in this menu will automatically switch the mode to Custom. 1 Audio Change the audio
  • Samsung 400BX | User Manual - Page 85
    3 Using MDC z Changes will only be applied to the displays that are powered on. If no display is selected, the factory default values will be displayed. z Magicinfo only functions on products that have the MagicInfo function. z TV mode is only available on products that have the TV function. Image
  • Samsung 400BX | User Manual - Page 86
    Lamp Control. z Manual Lamp Control Manually adjust the backlight for the selected display. Configuring the settings for Manual Lamp Control will automatically disable Auto Lamp Control. Auto Lamp Control and Manual Lamp Control will only be enabled when User Control Mode is selected in the Lamp
  • Samsung 400BX | User Manual - Page 87
    3 Using MDC 2 Ambient Light Not available on this product. Ambient Light detects ambient light intensity and automatically adjusts the screen brightness. Ambient Brightness Mode should be selected in the Lamp Control menu to use Ambient Light. Enable or disable Ambient Light for the selected display
  • Samsung 400BX | User Manual - Page 88
    for an extended period of time. a. Interval : Specify the interval to activate Safety Screen. b. Setting Time by Type z Bar : 10, 20, 30, 40, 50 z Eraser : 10, 20, 30, 40, 50 3 Safety Screen2 Select the type of safety screen you want for the selected display from Type. The selected type of safety
  • Samsung 400BX | User Manual - Page 89
    3 Using MDC Video Wall z The Video Wall function can be used to display part of a whole picture or repeat the same picture on each of connected multiple displays. z To start Video Wall, click "Video Wall Control". 89 3 Using MDC
  • Samsung 400BX | User Manual - Page 90
    3 Using MDC MDC Video Wall 1 2 3 4 1 On / Off Enable or disable Video Wall. 2 Format Select the format to display the split screen. Full Natural 3 Screen Divider z The screen can be divided into a maximum of 100 (Horizontal and Vertical screens multiplied). 90 3 Using MDC
  • Samsung 400BX | User Manual - Page 91
    3 Using MDC z A maximum of 15 displays can be arranged in a row. z If the Vertical arrangement is set to 15, a maximum of 6 displays can be assigned to the Horizontal arrangement. z If the Horizontal arrangement is set to 15, a maximum of 6 displays can be assigned to the Vertical arrangement. 4
  • Samsung 400BX | User Manual - Page 92
    3.4.3 Troubleshooting Guide Issue of 0 and 99. (Change the ID using the Display menu.) For a display that supports the ID in a range of 0 to 99, the ID should be set between 0 may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted from
  • Samsung 400BX | User Manual - Page 93
    3 Using MDC 3.4.4 How display properties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected display are displayed. 3 When two displays are selected (e.g. in sequence of ID 1 and 3): The
  • Samsung 400BX | User Manual - Page 94
    4 Screen Adjustment Configure the Picture settings (Brightness, Color Tone, etc.). z The layout of the Picture menu options may vary depending on the product. z The available options in the Picture menu depend on the selected input source and the settings in Edit Name. (Refer to page 61 for
  • Samsung 400BX | User Manual - Page 95
    4 Screen Adjustment If the input source is AV, Component or TV: M o d e D y n a m i c S t a n d a r d M o v i e C u s t o m M o v e E n t e r R e t u r n z Dynamic: This mode is suitable when the ambient light is bright. z Standard : This mode is generally suitable for any environment. z
  • Samsung 400BX | User Manual - Page 96
    4 Screen Adjustment 4.2 Custom Customize Tint under Picture. z Changing any setting under Custom will change the Mode setting to Custom. z This function is available when Dynamic Contrast is set to Off as long as Mode is not set to Advertisement. (Refer to page 112 and page 94 for details about
  • Samsung 400BX | User Manual - Page 97
    4 Screen Adjustment z Gamma(Natural/Mode1/Mode2/Mode3) Adjust the mid-range brightness (Gamma) of the picture. Natural displays the original picture. Mode1 displays the picture brighter than Natural mode. Mode2 displays the screen darker than Mode1. Mode3 displays dark parts darker and bright parts
  • Samsung 400BX | User Manual - Page 98
    4 Screen Adjustment If the input source is AV, Component or TV: C u s t o m C o n t r a s t B r i g h t n e s s S h a r p n e s s C o l o r T i n t 1 0 0 4 5 5 0 5 0 G r e e n 50 R e d 50 M o v e E n t e r R e t u r n z Contrast Adjust the contrast between the objects and background. (Range:
  • Samsung 400BX | User Manual - Page 99
    4 Screen Adjustment 4.3 Color Tone Adjust the general color tone of the picture. z This function is available when Dynamic Contrast is set to Off as long as Mode is not set to Advertisement. (Refer to page 112 and page 94 for details about Dynamic Contrast and Mode) z Changing any setting under
  • Samsung 400BX | User Manual - Page 100
    4 Screen Adjustment 1 Press / to move to the option you want and press [ ]. The selected option will be applied. 100 4 Screen Adjustment
  • Samsung 400BX | User Manual - Page 101
    4 Screen Adjustment 4.4 Color Control Change the color settings for the picture by adjusting the Red, Green and Blue values. (Range: 0~100) A higher value will increase the intensity of the selected color. z This option is available when the input source is PC or DVI. z This function is not
  • Samsung 400BX | User Manual - Page 102
    4 Screen Adjustment 4.5 Color Temp. Adjust the color temperature (Red/Green/Blue). (Range: 5000K-15000K) This function is available when Dynamic Contrast and Color Tone are set to Off as long as Mode is not set to Advertisement. (Refer to page 94, page 99 and page 112 for details about Mode, Color
  • Samsung 400BX | User Manual - Page 103
    4 Screen Adjustment 4.6 Image Lock Enhance the picture quality by removing noise (static) such as flickering and shaking. This option is available when the input source is PC. 4.6.1 Configuring the Image Lock Settings This product can only be controlled by using the remote control. 1 Press MENU
  • Samsung 400BX | User Manual - Page 104
    4 Screen Adjustment 4.7 Auto Adjustment Automatically adjust the Coarse, Fine, H-Position and V-Position settings. This function can be used to automatically detect and remove noise on the screen and correct the screen position. This function will automatically run if the screen resolution is
  • Samsung 400BX | User Manual - Page 105
    4 Screen Adjustment 4.8 Signal Balance This function is used to supplement a weak RGB signal being transmitted through a long cable. This function is available when the input source is PC and Dynamic Contrast is set to Off as long as Mode is not set to Advertisement (Refer to page 112 and page 94
  • Samsung 400BX | User Manual - Page 106
    4 Screen Adjustment 6 Press / to move to the option you want and press [ ]. The following screen will appear. R - G a i n 5 0 M o v e A d j u s t R e t u r n Specify the RGB (Red/Green/Blue) Gain and Offset values. R-Gain, G-Gain and B-Gain adjust the level of red, green and blue colors in
  • Samsung 400BX | User Manual - Page 107
    4 Screen Adjustment 4.9 Size Change the picture size. 4.9.1 Changing the Picture Size This product can only be controlled by using the remote control. 1 Press MENU on the remote control. 2 Press / to move to Picture and press [ ]. 3 Press / to move to Size and press [ ]. Different Size options are
  • Samsung 400BX | User Manual - Page 108
    4 Screen Adjustment If the input source is AV or Component: S i z e 1 6 : 9 Z o o m 1 Z o o m 2 4 : 3 Screen Fit C u s t o m M o v e E n t e r R e t u r n z 16:9: Display images with an aspect ratio of 16:9. Suitable for viewing DVD content or widescreen broadcasts. z Zoom1 : Enlarge the 16
  • Samsung 400BX | User Manual - Page 109
    minimizing noise (static) on the screen. z This option is available when the input source is AV, Component or TV. z Some resolutions do not support Digital NR. 4.10.1 Enabling Digital NR This product can only be controlled by using the remote control. 1 Press MENU on the remote control. 2 Press
  • Samsung 400BX | User Manual - Page 110
    4 Screen Adjustment 4.11 HDMI Black Level If you use the product by connecting to a DVD player or set-top box with a DVI cable, the contrast and color may degrade and the picture may be darker. If this is the case, correct the degraded picture quality using HDMI Black Level. (Normal/Low) This
  • Samsung 400BX | User Manual - Page 111
    4 Screen Adjustment 4.12 Film Mode Improve the picture quality to enhance the viewing experience when watching a movie. z This option is available when the input source is AV, Component or TV. z This option is only available when Interlace mode is selected as scanning mode under HDMI mode. It is
  • Samsung 400BX | User Manual - Page 112
    4 Screen Adjustment 4.13 Dynamic Contrast Maintain optimum contrast by automatically adjusting the contrast between objects and the background. You can enable or disable Dynamic Contrast. (Off/On) 4.13.1 Changing the Dynamic Contrast Setting This product can only be controlled by using the remote
  • Samsung 400BX | User Manual - Page 113
    4 Screen Adjustment 4.14 Lamp Control This function is used to adjust the brightness of the backlight to reduce power consumption. (Range: 0~100) This option is available when Dynamic Contrast is set to Off. (Refer to page 112 for details about Dynamic Contrast) 4.14.1 Changing the Lamp Control
  • Samsung 400BX | User Manual - Page 114
    4 Screen Adjustment 4.15 Picture Reset Restore the default picture settings. 4.15.1 Activating Picture Reset This product can only be controlled by using the remote control. 1 Press MENU on the remote control. 2 Press / to move to Picture and press [ ]. 3 Press / to move to Picture Reset and
  • Samsung 400BX | User Manual - Page 115
    5 Sound Adjustment Configure the sound (Sound) settings for the product. 5.1 Mode Select a sound mode (Mode) suitable for the environment where the product will be used. 5.1.1 Changing the Mode Setting This product can only be controlled by using the remote control. 1 Press MENU on the remote
  • Samsung 400BX | User Manual - Page 116
    5 Sound Adjustment 5.2 Custom You can customize the sound settings. 5.2.1 Configuring the Custom Settings This product can only be controlled by using the remote control. 1 Press MENU on the remote control. 2 Press / to move to Sound and press [ ]. 3 Press / to move to Custom and press [ ]. The
  • Samsung 400BX | User Manual - Page 117
    5 Sound Adjustment 5.3 Auto Volume This function can be used to adjust the volume to an appropriate level if the volume is particularly higher or lower than usual. 5.3.1 Changing the Auto Volume Setting This product can only be controlled by using the remote control. 1 Press MENU on the remote
  • Samsung 400BX | User Manual - Page 118
    5 Sound Adjustment 5.4 SRS TS XT You can enjoy the grand and vivid sound quality of 5.1-channel speakers using two speakers. TruSurround (TS) XT provides realistic surround sound through any type of 2-channel speaker system such as internal speakers. It is also fully compatible with all multi-
  • Samsung 400BX | User Manual - Page 119
    5 Sound Adjustment 5.5 Sound Reset Return the sound settings to the default factory settings. 5.5.1 Resetting Sound Settings (Sound Reset) This product can only be controlled by using the remote control. 1 Press MENU on the remote control. 2 Press / to move to Sound and press [ ]. 3 Press / to move
  • Samsung 400BX | User Manual - Page 120
    6 Settings You can configure additional settings as required. 6.1 Language Set the menu language. z English / Deutsch / Español / Français / Italiano / Svenska Português Türkçe A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other
  • Samsung 400BX | User Manual - Page 121
    6 Settings 6.2 Time You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time using the Timer function. 6.2.1 Clock Set Set the current time. Changing the Setting for Clock Set This product can only be controlled by using the
  • Samsung 400BX | User Manual - Page 122
    6 Settings 6.2.2 Sleep Timer Set the product to automatically power on or off after a specified period of time. You can select the time to turn off the product from 30, 60, 90, 120, 150 or 180 minutes from the current time. Setting Sleep Timer This product can only be controlled by using the
  • Samsung 400BX | User Manual - Page 123
    6 Settings 6.2.3 Timer1 / Timer2 / Timer3 Set the product to automatically power on or off at a specified time. The product will power on, preserving the same volume and input source settings as when it powered off. Setting Timer This product can only be controlled by using the remote control. 1
  • Samsung 400BX | User Manual - Page 124
    6 Settings 6.2.4 Holiday Management Timer will be disabled during a period specified as a holiday. Setting Holiday Management This product can only be controlled by using the remote control. 1 Press MENU on the remote control. 2 Press / to move to Setup and press [ ]. 3 Press / to move to Time
  • Samsung 400BX | User Manual - Page 125
    6 Settings 6.3 Menu Transparency Set the transparency for the menu windows: High, Medium, Low, Opaque z Select Menu Transparency and move to the option you want. The menu window will be displayed as a preview for the selected transparency. z Move to the option you want, and press [ ] or [ ]. The
  • Samsung 400BX | User Manual - Page 126
    6 Settings 6.4 Safety Lock Lock the product in order to prevent the product from malfunction or unintended changes to the settings, or change the PIN used for locking the product. 6.4.1 Change PIN Change the PIN required to lock the product. The default PIN is "0000." Select Change PIN to open a
  • Samsung 400BX | User Manual - Page 127
    6 Settings 7 Re-enter the new PIN. Change PIN Confirm new PIN. 0..9 A d j u s t 8 The PIN has been changed. E n t e r R e t u r n Entering the current PIN will display a new PIN input window. Enter a new PIN and enter it again to confirm. The message "PIN is changed successfully." will appear
  • Samsung 400BX | User Manual - Page 128
    6 Settings 6.5 Energy Saving Save power with the Energy Saving feature. While Energy Saving mode is active, the product power consumption will be controlled to save power. 6.5.1 Setting Energy Saving This product can only be controlled by using the remote control. 1 Press MENU on the remote control
  • Samsung 400BX | User Manual - Page 129
    the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo function. If more than four displays are connected horizontally and vertically, it is recommended that you use an input
  • Samsung 400BX | User Manual - Page 130
    6 Settings 6.6.2 Format Select a format to display images on multiple displays. z Full : Display images in full screen. z Natural : Display images at the original resolution without enlarging or reducing. Changing Format This product can only be controlled by using the remote control. 1 Press
  • Samsung 400BX | User Manual - Page 131
    6 Settings 6.6.3 Horizontal This function automatically divides the screen according to the specified number of horizontal displays. Enter the number of horizontally arranged displays. The horizontal screen will automatically be divided according to the number entered. A maximum of 15 displays can
  • Samsung 400BX | User Manual - Page 132
    6 Settings 6.6.4 Vertical This function automatically divides the screen according to the specified number of vertical displays. Enter the number of vertically arranged displays. The vertical screen will automatically be divided according to the number entered. A maximum of 15 displays can be
  • Samsung 400BX | User Manual - Page 133
    6 Settings 6.6.5 Screen Position You can customize the arrangement of split screens by moving displays identified with a number using the Screen Position function. Select Screen Position to display the arrangement of displays (identified with a number) specified according to the Horizontal or
  • Samsung 400BX | User Manual - Page 134
    6 Settings 6.7 Safety Screen This product uses a Safety Screen function to prevent afterimage burn-in on the screen when a stationary image is displayed for an extended period of time. The Safety Screen function allows you to configure various settings to protect the screen. 6.7.1 Pixel Shift
  • Samsung 400BX | User Manual - Page 135
    6 Settings z Vertical Specify how many pixels you want to move vertically. (Range: 0~4) V e r t i c a l 0 1 2 3 4 Press / M o v e E n t e r to select a number, and press [ R e t u r n ]. A higher value will minimize the chance of afterimage burn-in but slight flickering may occur. z Time Set
  • Samsung 400BX | User Manual - Page 136
    6 Settings 6.7.2 Timer Easily protect the screen by setting the timer to activate the afterimage burn-in prevention mode. (Bar and Eraser) Setting Timer This product can only be controlled by using the remote control. 1 Press MENU on the remote control. 2 Press / to move to Setup and press [ ].
  • Samsung 400BX | User Manual - Page 137
    to activate the timer at a specified interval. (10, 20, 30, 40 or 50 seconds) T i m e 1 0 2 0 3 0 4 0 5 0 Press / M o v e E n t e r to select a number, and press [ R e t u r n ]. 6.7.3 Bar / Eraser You can manually run the selected screen protection mode. Setting Bar / Eraser This product can
  • Samsung 400BX | User Manual - Page 138
    6 Settings 6.7.4 Side Gray Select the brightness of the grey color for blank parts on the screen. (Off / Light / Dark) Setting Side Grey This product can only be controlled by using the remote control. 1 Press MENU on the remote control. 2 Press / to move to Setup and press [ ]. 3 Press / to move to
  • Samsung 400BX | User Manual - Page 139
    6 Settings 6.9 Power On Adjustment You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 - 50 seconds) 6.9.1 Setting Power On Adjustment This product can only be controlled by using the remote control. 1 Press MENU on the remote control. 2 Press / to
  • Samsung 400BX | User Manual - Page 140
    6 Settings 6.10 OSD Rotation You can rotate and display the menu window in portrait mode when the product is in portrait orientation. 6.10.1 Changing the Menu Orientation (OSD Rotation) This product can only be controlled by using the remote control. 1 Press MENU on the remote control. 2 Press / to
  • Samsung 400BX | User Manual - Page 141
    set to 77 C. The recommended operating temperature for this product is 75 to 80 C (based on an ambient temperature of 40 C). Refer to "page 153" for details about operating environment requirements. T e m p e r a t u r e 80 A d j u s t R e t u r n Press / to select a number, and press [ ]. The
  • Samsung 400BX | User Manual - Page 142
    Press MENU on the remote control. 2 Press / to move to Setup and press [ ]. 3 Press / to move to Advanced Settings and press [ ]. 4 Press / to move to User Auto Color and press [ ]. 5 Press / to move to the option you want and press [ ]. 6 The selected option will be applied. z Auto Color This menu
  • Samsung 400BX | User Manual - Page 143
    6 Settings 6.11.4 Standby Control You can set the screen standby mode to be applied when an input signal is received. Setting Standby Control 1 Press MENU on the remote control. 2 Press / to move to Setup and press [ ]. 3 Press / to move to Advanced Settings and press [ ]. 4 Press / to move to
  • Samsung 400BX | User Manual - Page 144
    6 Settings 6.11.5 Lamp Schedule Setting Lamp Schedule This product can only be controlled by using the remote control. 1 Press MENU on the remote control. 2 Press / to move to Setup and press [ ]. 3 Press / to move to Advanced Settings and press [ ]. 4 Press / to move to Lamp Schedule and press [
  • Samsung 400BX | User Manual - Page 145
    6 Settings z Not Optimum Mode OSD Not Optimum Mode OSD O f f O n M o v e E n t e r R e t u r n Press / to select the option you want and press [ ]. z No Signal OSD No Signal OSD O f f O n M o v e E n t e r R e t u r n Press / to select the option you want and press [ ]. z MDC OSD MDC
  • Samsung 400BX | User Manual - Page 146
    6 Settings 6.12 Setup Reset This option returns the current settings under Setup to the default factory settings. 6.12.1 Resetting Setup (Setup Reset) This product can only be controlled by using the remote control. 1 Press MENU on the remote control. 2 Press / to move to Setup and press [ ]. 3
  • Samsung 400BX | User Manual - Page 147
    7 Troubleshooting Guide 7.1 Requirements Before Contacting Samsung Customer Service Center 7.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating
  • Samsung 400BX | User Manual - Page 148
    a PC") Blank spaces on the screen are not caused by the monitor. The cause of the problem is the PC or graphics card, and can be fixed by specifications. The images on the screen look distorted. Check the cable connection to the product ("2.2Connecting and Using a PC") 148 7 Troubleshooting Guide
  • Samsung 400BX | User Manual - Page 149
    7 Troubleshooting Guide Screen issue The screen is not clear. The screen is blurry. Adjust Coarse and Fine. Remove any accessories (video extension cable, etc) up to the maximum level, adjust the volume on your PC sound card or software program. Adjust Treble and Bass. 149 7 Troubleshooting Guide
  • Samsung 400BX | User Manual - Page 150
    7 Troubleshooting Guide Remote control issue The remote control does not work. Make sure that the batteries are correctly in place (+/-). Check if sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced. 150 7 Troubleshooting Guide
  • Samsung 400BX | User Manual - Page 151
    ĺ Display Settings ĺ Advanced Settings ĺ Monitor and adjust the frequency in Monitor Settings. z "Windows 7": Go to Control Panel ĺ Appearance and Personalization ĺ Display ĺ Adjust resolution ĺ Advanced Settings ĺ Monitor and adjust the frequency in Monitor Settings. 151 7 Troubleshooting Guide
  • Samsung 400BX | User Manual - Page 152
    7 Troubleshooting Guide Question How can I change the resolution? How do I set power-saving mode? Answer z " ĺ Personalize ĺ Screen Saver Settings or BIOS SETUP on the PC. Refer to the user manual for your PC or graphics card for further instructions on adjustment.. 152 7 Troubleshooting Guide
  • Samsung 400BX | User Manual - Page 153
    -Play Panel Dots (Pixels) 400BX 40 inch (101 cm) 885.6mm monitor and PC system optimizes the monitor settings. Monitor LCD panel. This does not affect product performance. The number of sub-pixels by LCD panel type: 40 type (101 cm screen): there are 6,220,800 sub-pixels. The above specifications
  • Samsung 400BX | User Manual - Page 154
    8 Specifications Class A (business communications device) This product is an EMC-registered Class A Device. This classification must be noted by vendors and users. This product is intended for use in non-home environments. 154 8 Specifications
  • Samsung 400BX | User Manual - Page 155
    8 Specifications 8.2 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the Disconnect the power cable if you will not be using the product for an extended period of time (during vacation, etc.). 155 8 Specifications
  • Samsung 400BX | User Manual - Page 156
    Specifications monitor (connected to a PC) for an LCD monitor. If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT monitor before you exchange it with the LCD monitor by referring to the graphics card user manual. Display Mode IBM, 640 x 350 40.000 50.000
  • Samsung 400BX | User Manual - Page 157
    8 Specifications Display Mode VESA, 1280 x 1024 VESA, 1280 x 1024 VESA, 1360 x 768 VESA, horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. Vertical Frequency The monitor displays a single image multiple times per second (like a fluorescent light) to display
  • Samsung 400BX | User Manual - Page 158
    . CANADA MEXICO U.S.A NORTH AMERICA 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) http://www.samsung.com http://www.samsung.com http://www.samsung.com ARGENTINA BRAZIL CHILE COLOMBIA COSTA RICA DOMINICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA
  • Samsung 400BX | User Manual - Page 159
    -201-24-18 05 133 1999 07001 33 11 062 SAMSUNG (062 726 7864) 800 - SAMSUNG (800-726786) http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) http://www.samsung.com http://www.samsung.com http://www.samsung.com Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394
  • Samsung 400BX | User Manual - Page 160
    -7267 800-7267 444 77 11 http://www.samsung.com http://www.samsung.com http://www.samsung.com/ch http://www.samsung.com/ch_fr (French) http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com CIS 8-800-555-55-55 8-800
  • Samsung 400BX | User Manual - Page 161
    Appendix HONG KONG INDIA INDONESIA JAPAN MALAYSIA PHILIPPINES SINGAPORE THAILAND TAIWAN VIETNAM IRAN OMAN KUWAIT BAHRAIN EGYPT JORDAN MOROCCO SAUDI ARABIA U.A.E NIGERIA SOUTH AFRICA ASIA PACIFIC (852) 3698 4698 http://www.samsung.com/hk http://www.samsung.com/ hk_en/ 3030 8282, 1800 3000 8282
  • Samsung 400BX | User Manual - Page 162
    be brighter or darker on the LCD panel. This does not affect product performance. † The number of sub-pixels by LCD panel type: 40 : 6,220,800 z Run saver if you will not be using the monitor for an extended period of time. z Unlike CDT monitors, TFT-LCD monitors (due to the nature of the panel) can
  • Samsung 400BX | User Manual - Page 163
    of Afterimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight
  • Samsung 400BX | User Manual - Page 164
    hours. † Power off the product for 2 hours after using it for 12 hours. † Go to Display Properties > Power Supply on your PC and set the monitor to power off as required. † Using a screen saver is recommended. It is best to use a single-color or moving-image screen saver. z Regular Color Change
  • Samsung 400BX | User Manual - Page 165
    Appendix † The best way to protect the monitor from afterimage burn-in is switching the power off or setting the PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending on instruction guide. z Screen Scroll Function † Screen Scroll Effect: A black bar
  • Samsung 400BX | User Manual - Page 166
    of a screen progressively. Interlace mode displays the odd number lines first and the even number lines next. Non-interlace mode is mainly used in monitors as it produces screen clarity and interlace mode is mainly used in TVs. Plug & Play Plug & Play is a function that allows the automatic exchange
  • Samsung 400BX | User Manual - Page 167
    (Multiple Display Control) is an application that allows multiple display devices to be controlled simultaneously using a PC. Communication between a PC and monitor takes place using RS232C (serial data transmission) and RJ45 (LAN) cables. DVD(Digital Versatile Disc) DVD refers to a CD-sized mass
  • Samsung 400BX | User Manual - Page 168
    they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be
  • Samsung 400BX | User Manual - Page 169
    128 I Items sold separately 21 L Lock function 126 M MDC Installation/Uninstallation 66 Mode 94 O OSD Rotation 140 P PC connection 50 Port 23 Problem report 147 R Remote Control 25 Reset All 146 Resolution configuration 53 RS232C connection 65 S Screen Fit 108 Screen Position 133 Sharpness 98 Size
  • Samsung 400BX | User Manual - Page 170
    Index V Video connection 56 Z Zoom1/Zoom2 108 Index 170
  • Samsung 400BX | User Manual - Page 171
    VER. 02
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
User Manual
400BX
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.