Samsung 400DX User Manual (ENGLISH)

Samsung 400DX - SyncMaster - 40" LCD Flat Panel Display Manual

Get Samsung 400DX - SyncMaster - 40inch LCD Flat Panel Display PDF manuals and user guides
UPC - 729507801049
View all Samsung 400DX manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung 400DX manual content summary:

  • Samsung 400DX | User Manual (ENGLISH) - Page 1
    SyncMaster 400DX-2, 400DXN-2, 460DX-2, 460DXN-2 LCD Display User Manual The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
  • Samsung 400DX | User Manual (ENGLISH) - Page 2
    it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Shortcut to Anti-Afterimage Instructions Do not use a damaged power cord or plug or a damaged or loose power outlet. • Otherwise, this may result in electric shock or fire. Do not
  • Samsung 400DX | User Manual (ENGLISH) - Page 3
    Installation Safety Instructions Ensure that the power plug is plugged into the power outlet firmly this may result in fire or electric shock. Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and
  • Samsung 400DX | User Manual (ENGLISH) - Page 4
    Instructions installs the wall mount. • Otherwise, it may fall and cause personal injury. • Make sure to install the specified wall mount. Install stand when lowering it. • This may cause damage to the product or the person carrying it. When cleaning the monitor case or the surface of the TFT-LCD
  • Samsung 400DX | User Manual (ENGLISH) - Page 5
    Others Safety Instructions When cleaning the product, make sure to disconnect the power cord. the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center. • Otherwise, this may result in electric shock or fire. If thunder or lightning is occurring,
  • Samsung 400DX | User Manual (ENGLISH) - Page 6
    Instructions Do not try to move the monitor by pulling only the wire or the signal cable. • Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable. Do not lift or move the product back a Service Center. . Set a resolution and frequency appropriate
  • Samsung 400DX | User Manual (ENGLISH) - Page 7
    Safety Instructions Take a rest for at least five (5) minutes after using the monitor for one (1) hour. This reduces eye fatigue. Do not install it in an unstable location such as an unstable rack or uneven surface or a location
  • Samsung 400DX | User Manual (ENGLISH) - Page 8
    Instructions fire. If the product has been turned on for a long time, the display panel becomes hot. Do not touch it. Keep the small accessories in a location careful when adjusting the angle of the product or the height of the stand. • This may result in personal injury as your hand or fingers may
  • Samsung 400DX | User Manual (ENGLISH) - Page 9
    Introduction Package Contents Note Please make sure the following items are included with your LCD Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional . • Make sure to keep the package box for transporting the product in the future. Unpacking LCD Display
  • Samsung 400DX | User Manual (ENGLISH) - Page 10
    all locations) User's Guide MagicInfo Software CD, MagicInfo Manual CD (Applicable to the DXN-2 model only) Cables Power Cord Others Remote Control (BP59-00138A) Sold separately Batteries (AAA X 2) BNC to RCA Adaptor Jack (Not available in all loca- (Applicable to the DX-2 tions) model only
  • Samsung 400DX | User Manual (ENGLISH) - Page 11
    Sold separately Wall Mount KIT Introduction RGB to BNC Cable BNC to BNC Cable (Applicable to the DX-2 model only) Semi Stand KIT Your LCD Display Front MENU button menu item. SOURCE button [SOURCE] Switches from PC mode to Video mode. Selects the input source that an external device is connected
  • Samsung 400DX | User Manual (ENGLISH) - Page 12
    mode will not be activated on the DXN-2 model. • MagicInfo supports the DXN-2 model only. PIP button Push the PIP button to turn the PIP screen On / Off. More than one PIP cannot overlap on screen as BNC and the component use the same terminal. • PC : DVI / AV / HDMI • BNC : DVI / AV / HDMI • DVI
  • Samsung 400DX | User Manual (ENGLISH) - Page 13
    to the DX-2 model only. Applicable to the DXN-2 model only. POWER S/W ON [ │ ] / OFF [O] Switches the LCD Display On/Off. POWER The power cord plugs into the LCD Display and the wall outlet. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port RGB IN (PC Connection Terminal
  • Samsung 400DX | User Manual (ENGLISH) - Page 14
    ). AV IN [VIDEO] Connect the [ VIDEO ] terminal of your monitor to the video output terminal of the external device using a VIDEO cable. AUDIO OUT Headphone/External speaker output terminal. HDMI IN Connect the HDMI terminal at the back of your LCD Display to the HDMI terminal of your digital output
  • Samsung 400DX | User Manual (ENGLISH) - Page 15
    , up to 10 LCD Displays can be connected (May not be supported depending on the connected cable). Note (Applicable to the DX-2 model only) BNC/COMPONENT IN [R/Y, G/PB, B/ PR, H, V] (BNC/Component Connection Terminal (input)) During component input, please check specifications for the input ports
  • Samsung 400DX | User Manual (ENGLISH) - Page 16
    differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking different depending on the model. Using the Anti-Theft Kensington Lock 1. Insert the locking device into the Kensington slot on the LCD Display and turn it
  • Samsung 400DX | User Manual (ENGLISH) - Page 17
    Turns the product Off. Press to change the channel. The "-" button is used to select Digital channels. Electronic Program Guide (EPG) display. - This function does not work for this LCD Display. Adjusts the audio volume. Press the button to change the input signal SOURCE. Changing the SOURCE is only
  • Samsung 400DX | User Manual (ENGLISH) - Page 18
    menu. - This function does not work for this LCD Display. TV channels provide written information services via teletext. - Teletext Buttons 13. MTS/DUAL 14 this LCD Display. Pauses (mutes) the audio output temporarily. This is displayed on the lower left corner of the screen. The audio comes back on
  • Samsung 400DX | User Manual (ENGLISH) - Page 19
    19. RETURN 20. EXIT 21. MagicInfo Introduction Returns to the previous menu. Exits from the menu screen. MagicInfo Quick Launch Button.
  • Samsung 400DX | User Manual (ENGLISH) - Page 20
    Connecting a Computer (400DXN-2,460DXN-2) (400DX-2,460DX-2) There are several ways to connect the computer to the monitor. Choose one from the following options. Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, RGB port on the back of your LCD Display and the
  • Samsung 400DX | User Manual (ENGLISH) - Page 21
    can be outputted. Note that sound is only available when connected according to the option that follows. Using the BNC (Analog) connector on the video card. (Applicable to the DX-2 model only) • Connect the BNC/COMPONENT IN port on the monitor to the BNC port on the PC using the BNC to BNC cable.
  • Samsung 400DX | User Manual (ENGLISH) - Page 22
    to the audio port on the back of the LCD Display. Connect the power cord for your LCD Display to the power port on the back of the LCD Display. Turn on the power switch. Note • Turn on both your computer and the LCD Display. • Contact a local SAMSUNG Electronics Service Center to buy optional items
  • Samsung 400DX | User Manual (ENGLISH) - Page 23
    the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV/COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display . 2. /COMPONENT IN [R/Y, G/PB, B/PR] ports on the monitor to the BNC port on the external device using the BNC to BNC cable.
  • Samsung 400DX | User Manual (ENGLISH) - Page 24
    using the Source button on the front of the LCD Display or on the remote control. Note Applicable to the DX-2 model only. Connecting Using a DVI Cable 1. Connect between the DVI OUT port on the LCD Display and the input port on another monitor using a DVI cable. 2. Connect between the AUDIO OUT port
  • Samsung 400DX | User Manual (ENGLISH) - Page 25
    output terminals of the digital output device, and connect the opposite jack to the DVI / RGB /HDMI AUDIO IN terminal of the LCD Display. 3. Select HDMI using the SOURCE button on the front of the LCD Display or on the remote control. Connecting a DVD Player - Applicable to the DX-2 model only.
  • Samsung 400DX | User Manual (ENGLISH) - Page 26
    optional. • For an explanation of Component video, consult your DVD manual. Connecting a DTV Set Top (Cable/Satellite) Box - Applicable to the DX-2 model only. 1. Connect a Component cable between the BNC/COMPONENT IN [R/Y, G/PB, B/PR] port on the LCD Display and the PR, Y, PB jacks on the Set Top
  • Samsung 400DX | User Manual (ENGLISH) - Page 27
    1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and AUDIO OUT on LCD Display. Connecting a LAN Cable Connect the LAN cable. (Applicable to the DXN-2 model only) Connecting a USB device You can connect USB devices such as a mouse or keyboard. (Applicable to the DXN
  • Samsung 400DX | User Manual (ENGLISH) - Page 28
    Connections
  • Samsung 400DX | User Manual (ENGLISH) - Page 29
    file at the Internet web site shown here. Internet web site : http://www.samsung.com/ Installing the Monitor Driver (Automatic) 1. Insert CD into the CD-ROM drive. 2. Click "Windows". 3. Choose your monitor model in the model list, then click the "OK" button. 4. If you can see following message
  • Samsung 400DX | User Manual (ENGLISH) - Page 30
    . The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft® Windows Vista™, Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click (Start) and "Control Panel". Then, double-click on "Appearance and
  • Samsung 400DX | User Manual (ENGLISH) - Page 31
    driver is under certifying MS logo, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage. 6. Click "Update Driver..." in the "Driver" tab. 7. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list
  • Samsung 400DX | User Manual (ENGLISH) - Page 32
    Using the Software 9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence. Microsoft® Windows® XP Operating System
  • Samsung 400DX | User Manual (ENGLISH) - Page 33
    CD into the CD-ROM drive. 2. Click "Start" → "Control Panel", then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...". 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click "Update Driver..." and
  • Samsung 400DX | User Manual (ENGLISH) - Page 34
    click the "Continue Anyway" button. Then click "OK" button. Note This monitor driver is certified by Microsoft,, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button, then click the "OK
  • Samsung 400DX | User Manual (ENGLISH) - Page 35
    specific driver", then click "Next" and then click "Have disk". 7. Click the "Browse" button, then choose A:(D:\Driver). 8. Click the "Open" button, then click "OK" button. 9. Choose your monitor model System 1. Click "Start", "Setting", "Control Panel". 2. Double click the "Display" icon. 3.
  • Samsung 400DX | User Manual (ENGLISH) - Page 36
    specific location...", then click "Next" button. 8. Click the "Have Disk" button. 9. Specify A:\(D:\driver), then click "OK" button. 10. Select "Show all devices" and choose the monitor level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide. Linux
  • Samsung 400DX | User Manual (ENGLISH) - Page 37
    not appear depending on specification of computer system or monitor. If that happens, press F5 Key. Installation Problems The installation of MDC Remove Programs" option of the Windows® Control Panel. Perform the following steps remove MDC. Select "Setting/Control Panel" on the "Start" menu and then
  • Samsung 400DX | User Manual (ENGLISH) - Page 38
    Using MDC Using the Software
  • Samsung 400DX | User Manual (ENGLISH) - Page 39
    a standard of serial communication, is used for the communication between a PC and a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a display. Main Screen Click Start > Program > Samsung > MDC System to start the program. Select a set to
  • Samsung 400DX | User Manual (ENGLISH) - Page 40
    Lock function. When setting the Lock function, you can only operate power and lock buttons on the remote control and set. 4. The setting for the PC Serial Port can change. The original value is COM1. 5. Click Select all or Clear to select or clear all displays. 6. Use Grid to view brief
  • Samsung 400DX | User Manual (ENGLISH) - Page 41
    than COM1 is used, COM1 through COM4 can be selected in the Port Selection Menu. 3. If the exact port name that is connected to the LCD Display using a serial cable is not selected, communication will be unavailable. 4. The selected port is stored in the program and used for the next program
  • Samsung 400DX | User Manual (ENGLISH) - Page 42
    Info Grid shows some basic information necessary to Power Control. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Use the Select All button or Check Box to choose a display to control.
  • Samsung 400DX | User Manual (ENGLISH) - Page 43
    Power Control allows controlling some of the functions of the selected display. 1) Power On/Off - Turns the power of the selected display On/Off. 2) Volume - Controls the volume level of the selected display. It receives the volume value of the selected display from the sets and displays it in the
  • Samsung 400DX | User Manual (ENGLISH) - Page 44
    • PC Mode
  • Samsung 400DX | User Manual (ENGLISH) - Page 45
    information necessary to Input Source Control. 1) PC - Changes the Input Source of the selected display to PC. 2) BNC - Changes the Input Source Component. 9) MagicInfo - The Input source of MagicInfo works only on MagicInfo model. 10) HDMI - Changes the Input Source of the selected display to
  • Samsung 400DX | User Manual (ENGLISH) - Page 46
    tab first appear. - The Image Size Control button controls Image Size available for PC, BNC, DVI. 5) Video Source - Click the Video Source tab to control Image Size for respective Input Source. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV
  • Samsung 400DX | User Manual (ENGLISH) - Page 47
    a TV (PAL only) is connected and the Image Size item is set to Auto Wide. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. The Image Size Control feature is available only for the displays whose power status is ON. Time
  • Samsung 400DX | User Manual (ENGLISH) - Page 48
    Set the current time for the selected display (PC Time). - To change the current time, first change the PC Time. 2) On Time Setup - Set the Hour The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. Time Control is available only for the displays
  • Samsung 400DX | User Manual (ENGLISH) - Page 49
    By Picture) - Turns on the PBP of the selected display and changes the size to Double 3. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. PIP Size can be controlled with turning on the
  • Samsung 400DX | User Manual (ENGLISH) - Page 50
    Source can be controlled with turning on the LCD Display power. 2) PC - Changes the source of the PIP of the selected display to PC. 3) BNC - Changes the source of Screen. The Input source of MagicInfo works only on MagicInfo model. The PIP Control feature is available only for the displays whose power
  • Samsung 400DX | User Manual (ENGLISH) - Page 51
    Settings Picture 1. Click Settings of the main icons and the Settings Control screen appears. Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide.When selected, each function fetches
  • Samsung 400DX | User Manual (ENGLISH) - Page 52
    set to Off. The Input source of TV works only on TV model. This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed. Settings Picture PC 1. Click Settings of the main icons and the Settings Control screen appears
  • Samsung 400DX | User Manual (ENGLISH) - Page 53
    . 10) Dynamic Contrast - Adjusts the Dynamic Contrast for the selected display. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. Color Temp is only enabled if the Color Tone is set to Off. This feature is available only for the displays
  • Samsung 400DX | User Manual (ENGLISH) - Page 54
    . 6) Sound Select - Select either Main or Sub when PIP is On. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. This feature is available only for the displays whose power status is ON and if no selection is made, the factory
  • Samsung 400DX | User Manual (ENGLISH) - Page 55
    the incoming PC signal. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. Settings Control is available only for the displays for which the power status is ON. Maintenance Lamp
  • Samsung 400DX | User Manual (ENGLISH) - Page 56
    off if you adjust using the Manual Lamp Control. The Maintenance Control feature is available only for the displays whose power status is ON. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. Maintenance Scroll 1. Click on the "Maintenance
  • Samsung 400DX | User Manual (ENGLISH) - Page 57
    occurring when a still screen is displayed on the monitor for a long time. The Interval item is Eraser types, it can be set to 10, 20, 30, 40 or 50. For the All White and Pattern type, it can works only on MagicInfo model. The Input source of TV works only on TV model. The Maintenance Control
  • Samsung 400DX | User Manual (ENGLISH) - Page 58
    . z The place will be set up by pressing a number in the selected mode. z The MDC program supplied by Samsung supports up to 5x5 LCD Displayes. 3) On / Off - Turns on/off the Video Wall function of the selected display. 4) Format - The format can be selected to see a divided screen. z Full z Natural
  • Samsung 400DX | User Manual (ENGLISH) - Page 59
    works only on TV model. The Maintenance Control function is available only for the displays where the power status is ON. Troubleshooting 1. The display you functions. This program may malfunction due to problems in communication circuits or interference from electronic appliances nearby.
  • Samsung 400DX | User Manual (ENGLISH) - Page 60
    2. Selected one display: Fetches and displays the settings value for the selected display. 3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of ID 1, fetches and displays the value of ID3. 4. Selected all sets using Select All: Returns
  • Samsung 400DX | User Manual (ENGLISH) - Page 61
    • MagicInfo Note • The BNC mode will not be activated on the DXN-2 model. • MagicInfo supports the DXN-2 model only. Source List MENU → ENTER → → ENTER → → , → ENTER Use to select PC, DVI or other external input sources connected to the LCD Display. Use to select the screen of your choice
  • Samsung 400DX | User Manual (ENGLISH) - Page 62
    When external AV devices such as VCRs or DVDs are connected to the LCD Display , PIP allows you to watch video from those devices in a small window super-imposed on the PC Video signal. (Off/On) MENU → ENTER → Note → → ENTER → • More than one PIP cannot be overlapped on screen as BNC and
  • Samsung 400DX | User Manual (ENGLISH) - Page 63
    Swap MENU → ENTER → Adjusting the LCD Display → →ENTER ENTER → Size Swaps the contents of the PIP and main image. The image in the PIP window will appear on the main screen,
  • Samsung 400DX | User Manual (ENGLISH) - Page 64
    Display → , → ENTER Adjusts the Transparency of PIP windows. • High • Medium • Low • Opaque Note • PIP turns off when the LCD Display is switched to an external source. • For PC and DVI, this is deactivated if the cable is disconnected. Edit Name MENU → ENTER → → ENTER → → → → , → ENTER Name
  • Samsung 400DX | User Manual (ENGLISH) - Page 65
    Adjusting the LCD Display Picture [PC / DVI / BNC / MagicInfo Mode] Available Modes • PC / DVI / BNC • AV • Component • HDMI • MagicInfo Note • The BNC mode will not be activated on the DXN-2 model. • MagicInfo supports the DXN-2 model only. MagicBright MENU → → ENTER → → ENTER → → , → ENTER
  • Samsung 400DX | User Manual (ENGLISH) - Page 66
    Adjusting the LCD Display Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste.
  • Samsung 400DX | User Manual (ENGLISH) - Page 67
    Adjusting the LCD Display → , → ENTER The color tones can be changed. (Not available when Dynamic Contrast is set to On.) 1. Off 2. Cool 3. Normal 4. Warm 5. Custom Note If you
  • Samsung 400DX | User Manual (ENGLISH) - Page 68
    Adjusting the LCD Display → , → ENTER Color Temp. MENU → → ENTER → ENTER → → , → ENTER Color Temp. not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. (Available in PC mode only) MENU → → ENTER → ENTER → Coarse MENU → → ENTER → ENTER → → ENTER
  • Samsung 400DX | User Manual (ENGLISH) - Page 69
    the LCD Display ENTER Adjusts the screen location horizontally and vertically. Auto Adjustment MENU → → ENTER → ENTER → The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed. (Available in PC mode
  • Samsung 400DX | User Manual (ENGLISH) - Page 70
    Adjusting the LCD Display MENU → → ENTER → → ENTER → → ENTER → → ENTER → → , → ENTER 2. G-Gain MENU → → ENTER → → ENTER → → ENTER ENTER→ → , → ENTER 3. B-Gain MENU → → ENTER → → ENTER → → ENTER ENTER→ → , → ENTER 4. R-Offset MENU → → ENTER → → ENTER → →
  • Samsung 400DX | User Manual (ENGLISH) - Page 71
    Adjusting the LCD Display → , → ENTER The Size can be switched. 1. 16:9 2. 4:3 HDMI Black Level MENU the connected external device. 1. Normal 2. Low Note • For Timing which can be used for both the PC and the DTV in DVI, HDMI mode, HDMI Black Level will be activated. PIP Picture MENU → → ENTER
  • Samsung 400DX | User Manual (ENGLISH) - Page 72
    Adjusting the LCD Display MENU → → ENTER → → ENTER→ ENTER → → , → ENTER Adjusts the Contrast of the PIP window on the screen. 2. Brightness MENU → → ENTER ENTER → ENTER → → , → ENTER Adjusts the Brightness
  • Samsung 400DX | User Manual (ENGLISH) - Page 73
    Adjusting the LCD Display Note Enabled only when the PIP input is selected in inverter lamp in order to reduce energy consumption. Note This function does not operate when Dynamic Contrast is set to On in PC, DVI, AV, HDMI, Component or MagicInfo modes. ( MagicInfo : Applicable to the DXN-2 model
  • Samsung 400DX | User Manual (ENGLISH) - Page 74
    / HDMI / Component Mode] Available Modes • PC / DVI / BNC • AV • Component • HDMI • MagicInfo Mode Note • The BNC mode will not be activated on the DXN-2 model. • MagicInfo supports the DXN-2 model only. MENU → → ENTER → → ENTER → → , → ENTER The LCD Display has four automatic picture settings
  • Samsung 400DX | User Manual (ENGLISH) - Page 75
    Adjusting the LCD Display (Not available when Dynamic Contrast is set to On.) Contrast MENU → → ENTER → → → ENTER → → ENTER→ → , → ENTER Adjusts the Contrast. Brightness MENU → → ENTER → → → ENTER → → → ENTER → → , → ENTER
  • Samsung 400DX | User Manual (ENGLISH) - Page 76
    Adjusting the LCD Display → , → ENTER The color tones can be changed. The individual Color components are also user adjustable. (Not available when Dynamic Contrast is set to On.) 1. Off 2. Cool2 3. Cool1 4. Normal 5. Warm1 6. Warm2 Note If you set the Color Tone to Cool2,
  • Samsung 400DX | User Manual (ENGLISH) - Page 77
    Adjusting the LCD Display → , → ENTER The Size can be set to On.) Note • Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Screen Fit feature. • Zoom 1, available for all resolutions. HDMI Black Level MENU → → ENTER → ENTER →
  • Samsung 400DX | User Manual (ENGLISH) - Page 78
    Adjusting the LCD Display → , → ENTER When a DVD or set-top box is connected to your TV by configuring the HDMI black level. 1. Normal 2. Low Note For Timing which can be used for both the PC and the DTV in DVI, HDMI mode, HDMI Black Level will be activated. Film Mode MENU → → ENTER → ENTER
  • Samsung 400DX | User Manual (ENGLISH) - Page 79
    Adjusting the LCD Display Note • Available Modes: PIP ON 1. Contrast MENU → → ENTER → → ENTER→ ENTER → → , → ENTER Adjusts the Contrast of the PIP window on the screen. 2. Brightness MENU → → ENTER
  • Samsung 400DX | User Manual (ENGLISH) - Page 80
    Adjusting the LCD Display → , → ENTER Adds a natural tone to the PIP window. Note lamp in order to reduce energy consumption. Note This function does not operate when Dynamic Contrast is set to On in PC, DVI, AV, HDMI, Component or MagicInfo modes. ( MagicInfo : Applicable to the DXN-2 model
  • Samsung 400DX | User Manual (ENGLISH) - Page 81
    brightness. 1. Off 2. On Sound Available Modes • PC / DVI / BNC • AV • Component • HDMI • MagicInfo Mode Note • The BNC mode will not be activated on the DXN-2 model. • MagicInfo supports the DXN-2 model only. MENU ENTER → → ENTER → → , → ENTER The LCD Display has a built-in high fidelity
  • Samsung 400DX | User Manual (ENGLISH) - Page 82
    Adjusting the LCD Display 5. Custom Selects Custom if you want to adjust the settings high frequency audio. Balance MENU ENTER → → → ENTER → → → → ENTER → → , → ENTER Allows you to Adjusts the sound balance between the left and right speakers. Auto Volume MENU ENTER → → → → ENTER →
  • Samsung 400DX | User Manual (ENGLISH) - Page 83
    Adjusting the LCD Display → , → ENTER Reduces the difference in volume control between broadcasters. 1. Off 2. On SRS TS XT MENU ENTER → ENTER → → , → ENTER SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround
  • Samsung 400DX | User Manual (ENGLISH) - Page 84
    , the volume control is also only available from the External speakers. Available Modes • PC / DVI / BNC • AV • Component • HDMI • MagicInfo Note • The BNC mode will not be activated on the DXN-2 model. • MagicInfo supports the DXN-2 model only. Language MENU ENTER → → ENTER → → , → ENTER
  • Samsung 400DX | User Manual (ENGLISH) - Page 85
    Adjusting the LCD Display You can choose one of 13 languages. Note The language ENTER → → → ENTER → → ENTER→ ENTER Current Time Setting. Sleep Timer MENU ENTER → → → ENTER → → → ENTER→ → , → ENTER Turns the LCD Display off automatically at certain times. 1. Off 2. 30 3. 60 4. 90 5. 120
  • Samsung 400DX | User Manual (ENGLISH) - Page 86
    at a preset time. Controls the mode and the volume level at the time the LCD Display turns on automatically. Off Timer MENU ENTER → → → ENTER → ENTER→ ENTER Turns the LCD Display off automatically at a preset time. Menu Transparency MENU ENTER → → → → ENTER → → , → ENTER Change the
  • Samsung 400DX | User Manual (ENGLISH) - Page 87
    Lock Change PIN MENU ENTER → ENTER → → ENTER→ → [0∼9] → [0∼9] → [0∼9] → [0∼9] The password can be changed. Note The preset password for the LCD Display is "0000". Lock On MENU ENTER → → ENTER → → → ENTER → [0∼9] → [0∼9] → [0∼9] → [0∼9] This is the function that locks the OSD in
  • Samsung 400DX | User Manual (ENGLISH) - Page 88
    Adjusting the LCD Display This feature adjusts the power consumption of the unit in order to save energy. 1. Off 2. On Video Wall A Video Wall is a set of video screens connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on
  • Samsung 400DX | User Manual (ENGLISH) - Page 89
    Adjusting the LCD Display 1. Full Provides a full screen without any margins. 2. Natural Displays a natural image with the original aspect ratio intact. Horizontal MENU ENTER → ENTER → → → → ENTER → → , → ENTER Sets
  • Samsung 400DX | User Manual (ENGLISH) - Page 90
    → , → ENTER To prevent after-images on the screen, you can use this function to have pixels move on the LCD in the horizontal or vertical direction. 1. Off 2. On Note The Pixel Shift is not available when Video Wall is On. Horizontal MENU ENTER → ENTER → → ENTER → → → ENTER → → , → ENTER
  • Samsung 400DX | User Manual (ENGLISH) - Page 91
    Adjusting the LCD Display Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4. Vertical MENU ENTER → ENTER → → ENTER → → → → ENTER → → , → ENTER Time Sets how many pixels
  • Samsung 400DX | User Manual (ENGLISH) - Page 92
    Adjusting the LCD Display Mode 1. Off 2. On MENU ENTER → ENTER → → → ENTER → → → ENTER → → , → ENTER You can change the Safety Screen Type. 1. Scroll 2. Bar 3. Eraser Period MENU ENTER → ENTER → → → ENTER → → → →
  • Samsung 400DX | User Manual (ENGLISH) - Page 93
    : 10~50 sec MENU ENTER ENTER → ENTER → This function helps to remove after-images on the screen by moving all the pixels on the LCD according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the
  • Samsung 400DX | User Manual (ENGLISH) - Page 94
    @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x 768 @ 60Hz, by using this function(Resolution Select), you can have the picture displayed on the screen in the specified resolution. Note Available in PC mode only 1. Off 2. 1024 X 768 3. 1280 X 768 4. 1360 x 768 5. 1366 X 768 Note Selecting the
  • Samsung 400DX | User Manual (ENGLISH) - Page 95
    Adjusting the LCD Display Power On Adjustment MENU ENTER → ENTER → → , → ENTER Adjusts the Power On Portrait Reset Reverts the product settings to factory defaults. The Reset function is only available when PC / DVI is being used. MENU ENTER → → ENTER Image Reset MENU ENTER → →
  • Samsung 400DX | User Manual (ENGLISH) - Page 96
    when Video Wall is On. Color Reset MENU ENTER → → → → ENTER → ENTER → , → ENTER Multi Control Available Modes • PC / DVI / BNC • AV • Component • HDMI • MagicInfo Note • The BNC mode will not be activated on the DXN-2 model. • MagicInfo supports the DXN-2 model only. Multi
  • Samsung 400DX | User Manual (ENGLISH) - Page 97
    PC / DVI / BNC • AV • Component • HDMI • MagicInfo Note • The BNC mode will not be activated on the DXN-2 model. • MagicInfo supports the DXN-2 model • The preset password for the LCD Display is "000000". • The server program's Power-On option works only if the LCD Display's power is com- pletely
  • Samsung 400DX | User Manual (ENGLISH) - Page 98
    highly recommended not to turn off the AC power during an operation. • For pivoted LCD Displays, ticker transparency is not supported. • For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for movies. • For drive D:, EWF is not applied. • To save Setup contents that have
  • Samsung 400DX | User Manual (ENGLISH) - Page 99
    the LCD Display In step 2 of MagicInfo Setup Wizard, you don't have to go to Network Setting on the desktop to make your settings for TCP/IP. You just do that at step 2 of MagicInfo installation. 3. Select Language - step 3 When using multiple languages, you can choose and set a specific language
  • Samsung 400DX | User Manual (ENGLISH) - Page 100
    Adjusting the LCD Display You can select which rotation type will be applied to your device. 5. Setup Information Shows the settings that have been selected by the user. Note If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo icon on the window desktop. The
  • Samsung 400DX | User Manual (ENGLISH) - Page 101
    Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the LCD Display. 2. Unplug the video cable from the back
  • Samsung 400DX | User Manual (ENGLISH) - Page 102
    resolution.) 5. If you have problems in installing the Adaptor (video) driver, boot the computer in Safe Mode, remove the Display Adaptor in the "Control Panel the MagicInfo Troubleshooting section. Problems related to the Installation (PC Mode) Note Problems related to the LCD Display installation
  • Samsung 400DX | User Manual (ENGLISH) - Page 103
    Troubleshooting A: Check if the signal cable between the computer and the LCD Display is securely connected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: The screen is blank and the power indicator
  • Samsung 400DX | User Manual (ENGLISH) - Page 104
    Troubleshooting Q: The screen color is inconsistent. A: Adjust color using Custom under button, check the cable connection between the LCD Display and the computer to ensure that the connector is properly connected. Problems related to Audio Note Problems related to audio signals and their solutions
  • Samsung 400DX | User Manual (ENGLISH) - Page 105
    the video card. Note That video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) Q: How can I adjust the resolution? A: Windows XP: Set the resolution in the Control Panel → Appearance and Themes → Display → Settings
  • Samsung 400DX | User Manual (ENGLISH) - Page 106
    Troubleshooting Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer.
  • Samsung 400DX | User Manual (ENGLISH) - Page 107
    Specifications General General Model Name SyncMaster 400DX-2, 400DXN-2 SyncMaster 460DX-2, 460DXN-2 LCD Panel Size Display area Pixel Pitch SyncMaster 400DX-2, 400DXN-2 SyncMaster 460DX-2, 460DXN-2 SyncMaster 400DX-2, 400DXN-2 SyncMaster 460DX-2, 460DXN-2 SyncMaster 400DX-2, 400DXN-2 SyncMaster
  • Samsung 400DX | User Manual (ENGLISH) - Page 108
    USB(3port), VGA OUT (With Network model), Component / BNC (Without Network model) Dimensions (W x H x D) / Weight SyncMaster 932.0 x 548.0 x 136.0 mm / 36.7 x 21.6 x 5.4 inch (Without 400DX-2, 400DXN-2 Stand) / 23.0 kg / 50.7 lbs (DXn-2), 22.0 kg / 48.5 lbs (DX-2) 932.0 x 604.0 x 311.0 mm / 36
  • Samsung 400DX | User Manual (ENGLISH) - Page 109
    quality and you can use it without any problems. For example, the number of TFT-LCD sub pixels contained in this product are 6,220,800. Note Design and specifications are subject to change without prior notice. Note • DX-2 - Class B Equipment (Information Communication equipment for residential use
  • Samsung 400DX | User Manual (ENGLISH) - Page 110
    Specifications blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows. Display Mode IBM, 640 x 350 IBM, 640 x 480 IBM, 720 x 400 MAC, 640 x 480 MAC, 832 x 624 MAC, 1152 x 870 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600
  • Samsung 400DX | User Manual (ENGLISH) - Page 111
    for TFTLCD. • Resolution: 1920 x 1080 • Vertical frequency (refresh rate): 60 Hz TFT-LCD panels manufactured by using advanced without any problems. • For example, the number of TFT-LCD sub pixels contained in this product are 6,220,800. When cleaning the monitor and the panel outside, please
  • Samsung 400DX | User Manual (ENGLISH) - Page 112
    the power off for 4 hours after 20 hours in use • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one color or a moving image is recommended. Change the Color
  • Samsung 400DX | User Manual (ENGLISH) - Page 113
    use. • The best way to protect your monitor from Image retention is to turn the Power off, or set your PC or System to operate a Screen Saver program Horizontal Bar with Black Color move up and down. - Select method • Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Screen Scroll • Time Interval
  • Samsung 400DX | User Manual (ENGLISH) - Page 114
    Pixel function on Product • Apply the Screen Pixel function - Symptom: Dot with Black Color move up and down. - Select method • Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Pixel • Time Interval : 1 ~ 10 hours ( Recommend : 1 ) • Time Period : 10 ~ 50 seconds ( Recommend : 50 ) • Apply
  • Samsung 400DX | User Manual (ENGLISH) - Page 115
    Information • Time Interval : 1 ~ 10 hours ( Recommend : 1 ) • Time Period : 10 ~ 50 seconds ( Recommend : 50 )
  • Samsung 400DX | User Manual (ENGLISH) - Page 116
    or comments relating to Samsung products, please contact the SAMSUNG customer care center. U.S.A CANADA MEXICO North America 1-800-SAMSUNG(726-7864) http://www.samsung.com/us 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca 01-800-SAMSUNG (726-7864) http://www.samsung.com/mx ARGENTINA BRAZIL
  • Samsung 400DX | User Manual (ENGLISH) - Page 117
    022 - 607 - 93 - 33 808 20 - SAMSUNG http://www.samsung.com/pt (7267864) 0800-SAMSUNG (726-7864) http://www.samsung.com/sk 902 - 1 - SAMSUNG(902 172 http://www.samsung.com/es 678) 0771 726 7864 (SAMSUNG) http://www.samsung.com/se 0848 - SAMSUNG (7267864, http://www.samsung.com/ch CHF 0.08/min) 0845
  • Samsung 400DX | User Manual (ENGLISH) - Page 118
    & Africa 0860-SAMSUNG(726-7864) http://www.samsung.com/za 444 77 11 http://www.samsung.com/tr 800-SAMSUNG(726-7864) http://www.samsung.com/ae 8000-4726 Terms Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance
  • Samsung 400DX | User Manual (ENGLISH) - Page 119
    for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for composed of 1920 horizontal dots (horizontal resolution) and 1080 vertical lines (vertical resolution). Correct Disposal of This Product (Waste
  • Samsung 400DX | User Manual (ENGLISH) - Page 120
    battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product user replaceable. For information on its replacement, please contact your service provider. Authority Information in this document is subject to change without notice. © 2009 Samsung
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
SyncMaster 400DX-2, 400DXN-2, 460DX-2, 460DXN-2
LCD Display
User Manual
The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.