Samsung 400TSN User Manual (ENGLISH)

Samsung 400TSN Manual

Get Samsung 400TSN PDF manuals and user guides View all Samsung 400TSN manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung 400TSN manual content summary:

  • Samsung 400TSN | User Manual (ENGLISH) - Page 1
    SyncMaster 400TSn-2/460TSn-2 LCD Monitor User Manual
  • Samsung 400TSN | User Manual (ENGLISH) - Page 2
    screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Shortcut to Anti-Afterimage Instructions Do not use a damaged power cord or plug or a damaged or loose power outlet. • Otherwise, this may result in electric shock or fire. Do not touch the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 3
    Installation Safety Instructions Ensure that the power plug is plugged into the power outlet firmly this may result in fire or electric shock. Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and
  • Samsung 400TSN | User Manual (ENGLISH) - Page 4
    Clean Safety Instructions Keep heating appliances as far away from the power cord or part of your body on the stand when lowering it. • This may cause damage to the product or the person carrying it. When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened
  • Samsung 400TSN | User Manual (ENGLISH) - Page 5
    Instructions a malfunction. The product is a high voltage product. Ensure that users do not disassemble, repair or modify the product themselves. • Otherwise, from the product, disconnect the power plug immediately and contact a Service Center. • Otherwise, this may result in electric shock or fire
  • Samsung 400TSN | User Manual (ENGLISH) - Page 6
    Instructions If thunder or lightening is occurring, do not touch the power cord or antenna cable. • Otherwise, this may result in electric shock or fire. Do not try to move the monitor contact a Service Center. • Otherwise, this may result in electric shock or fire. When using a fixed screen for a
  • Samsung 400TSN | User Manual (ENGLISH) - Page 7
    Safety Instructions If you continually move closer to the product screen, your eyesight may be failing. Take a rest for at least five (5) minutes after using the monitor for one (1) hour. This reduces the weariness of your eyes. Do not install it in an unstable location such as an unstable rack or
  • Samsung 400TSN | User Manual (ENGLISH) - Page 8
    Instructions result in electric shock or fire. When there is a gas leak, do not touch the product or the power plug but ventilate immediately. • If a spark occurs careful when adjusting the angle of the product or the height of the stand. • This may result in personal injury as your hand or fingers
  • Samsung 400TSN | User Manual (ENGLISH) - Page 9
    . If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Note This stand is not for the Floor Standing Type. Unpacking Manuals LCD Display Quick Setup Guide Cables Warranty Card (Not available in all locations) User's Guide Power Cord Others D-Sub Cable
  • Samsung 400TSN | User Manual (ENGLISH) - Page 10
    all loca- tions) HDD Cover DVI Cable Wall Mount KIT LAN Cable Semi Stand KIT TV tuner box Note • You can purchase and connect a separate to their respective user manuals. • You can only connect one external box. Your LCD Display Front MENU button [MENU] Opens the on-screen menu and exits
  • Samsung 400TSN | User Manual (ENGLISH) - Page 11
    Note • The TV menu is available when a TV tuner box is installed. D.MENU Opens the on-screen D.MENU. Note • This is available when a TV tuner box is installed. Power button [ ] Use blinking green Note See PowerSaver described in the manual for further information regarding power saving functions. For
  • Samsung 400TSN | User Manual (ENGLISH) - Page 12
    Introduction POWER S/W ON [ │ ] / OFF [O] Switches the LCD Display On/Off. POWER IN The power cord plugs into the LCD Display and the wall plug. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port DVI / PC / HDMI IN [DVI/PC/HDMI AUDIO IN] (PC/DVI/HDMI Audio Connection
  • Samsung 400TSN | User Manual (ENGLISH) - Page 13
    to the POWER connector of a TV tuner box or network box. AV IN [VIDEO] (VIDEO Connection Terminal) Connect the [ VIDEO ] terminal of your monitor to the video output terminal of the external device using a VIDEO cable. AV AUDIO IN [L-AUDIO-R](LCD Display Audio Connection Terminal (Input)) AV AUDIO
  • Samsung 400TSN | User Manual (ENGLISH) - Page 14
    from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking Theft Kensington Lock 1. Insert the locking device into the Kensington slot on the Monitor and turn it in the locking direction . 2. Connect the Kensington Lock
  • Samsung 400TSN | User Manual (ENGLISH) - Page 15
    Number Buttons DEL + VOL - button MUTE TV/DTV MENU INFO COLOR BUTTONS TTX/MIX STILL AUTO S.MODE MDC LOCK SOURCE ENTER/PRE-CH CH/P D.MENU GUIDE RETURN Up-Down Left-Right buttons EXIT SRS MagicInfo P.MODE DUAL/MTS PIP SWAP Turns the product On. Turns the product Off. Press to change
  • Samsung 400TSN | User Manual (ENGLISH) - Page 16
    services via teletext. - Teletext Buttons 13.STILL 14.AUTO 15. S.MODE 16.MDC 17.LOCK 18. SOURCE 19. ENTER/PRE-CH 20. CH/P 21.D.MENU 22.GUIDE For more information > TTX / MIX Press the button once to freeze the screen external devices that are connected to the monitor at the time. This button is
  • Samsung 400TSN | User Manual (ENGLISH) - Page 17
    (Multichannel Television Stereo) mode. FM Stereo Audio Type Mono Stereo SAP MTS/S_Mode Mono Mono ↔ Stereo Mono ↔ SAP Default Manual Change Mono Every time you press the button, a PIP screen appears. - This fuction does not work for this LCD Display. Swaps the contents of the PIP and main image
  • Samsung 400TSN | User Manual (ENGLISH) - Page 18
    Mechanical Layout (400TSn-2) Mechanical Layout Introduction Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards. • Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG Distributor to place an order. After
  • Samsung 400TSN | User Manual (ENGLISH) - Page 19
    a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • This
  • Samsung 400TSN | User Manual (ENGLISH) - Page 20
    Introduction 1. Insert and tighten the Captive Screw in the direction of the arrow. When done, mount the wall bracket on the wall. There are two hinges(left and right). Use the correct one. A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2. Before drilling into the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 21
    Introduction To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. Notice • Mount the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 22
    Introduction 4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A - LCD Display
  • Samsung 400TSN | User Manual (ENGLISH) - Page 23
    VESA, make sure to comply with the international VESA standards. • Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG Distributor to place an order. After your order is placed, installation professionals will visit you and install the bracket. • At least
  • Samsung 400TSN | User Manual (ENGLISH) - Page 24
    a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • This
  • Samsung 400TSN | User Manual (ENGLISH) - Page 25
    Introduction There are two hinges(left and right). Use the correct one. A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2. Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too
  • Samsung 400TSN | User Manual (ENGLISH) - Page 26
    Introduction To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. Notice • Mount the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 27
    Introduction 4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A - LCD Display
  • Samsung 400TSN | User Manual (ENGLISH) - Page 28
    Introduction Make sure to use the top center, and not the left or the right side of the product to adjust the angle.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 29
    Connections Connecting a Computer Using a Power cord with Earth • In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When un-wiring the earth lead, make sure to disconnect the AC power in advance. Note AV
  • Samsung 400TSN | User Manual (ENGLISH) - Page 30
    on the back of your computer. Note • Turn on both your computer and the LCD Display. • The DVI cable is optional. • Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices Using a Power cord with Earth • In the event of failure, the earth lead may cause
  • Samsung 400TSN | User Manual (ENGLISH) - Page 31
    Connecting to a Camcorder Connections 1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV AUDIO IN [L-AUDIO-R] on the LCD Display . 2. Connect a video
  • Samsung 400TSN | User Manual (ENGLISH) - Page 32
    Connections Connecting Using a DVI to HDMI Cable Note • Connect the DVI output terminal of a digital output device to the HDMI terminal of the LCD Display using a DVI to HDMI cable. • Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 33
    Connections Note Connect the LAN cable. Connecting a USB device Using a Power cord with Earth • In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When un-wiring the earth lead, make sure to disconnect the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 34
    program file at the Internet web site shown here. Internet web site : http://www.samsung.com/ (Worldwide) Installing the Monitor Driver (Automatic) 1. Insert CD into the CD-ROM drive. 2. Click "Windows". 3. Choose your monitor model in the model list, then click the "OK" button. 4. If you can see
  • Samsung 400TSN | User Manual (ENGLISH) - Page 35
    MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft® Windows Vista™, Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click (Start) and
  • Samsung 400TSN | User Manual (ENGLISH) - Page 36
    is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. 6. Click "Update Driver..." in the "Driver" tab. 7. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device
  • Samsung 400TSN | User Manual (ENGLISH) - Page 37
    Using the Software 9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence. Microsoft® Windows® XP Operating System
  • Samsung 400TSN | User Manual (ENGLISH) - Page 38
    . 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...". 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button. 6. Select "Don't search, I will..." then click
  • Samsung 400TSN | User Manual (ENGLISH) - Page 39
    the "Continue Anyway" button. Then click "OK" button. Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button then click "OK" button
  • Samsung 400TSN | User Manual (ENGLISH) - Page 40
    " then click "Next" and then click "Have disk". 7. Click the "Browse" button then choose A:(D:\Driver). 8. Click the "Open" button, then click "OK" button. 9. Choose your monitor model and click the "Next" button then click "Next" button. 10. Click the "Finish" button then the "Close" button. If
  • Samsung 400TSN | User Manual (ENGLISH) - Page 41
    to the Preset Timing Modes in the user guide. Linux Operating System To execute X-Window, you need to make the X86Config file, which is a type of system setting file. 1. Press "Enter" at the first and the second screen after executing the X86Config file. 2. The third screen is for setting your mouse
  • Samsung 400TSN | User Manual (ENGLISH) - Page 42
    serial port and supports compatibility of multi-touchscreens at the same PC. This window shows the basic information of the touchscreen and calibration. If several touchscreens are mounted on the PC and status is set "multi-screens display", user may use the button [Select Monitor] and must choose
  • Samsung 400TSN | User Manual (ENGLISH) - Page 43
    Calibrated" will show "Yes". Calibration compromising of steps: select a touchscreen in the information list, then click "calibrate" button when the calibration points so that user only clicks the center of the bull's-eye in sequence. If failing to hit the bull's eye, user may move the pointer
  • Samsung 400TSN | User Manual (ENGLISH) - Page 44
    is well suitable to the above application. 4. Enable Touch Enable(default)/disable touchscreen; 5. Hide Cursor Hide cursor without closedown of the area on the screen for two seconds, the right-click pop-up menu will show up. Right-click is only available in Mouse Emulation mode. User may adjust the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 45
    will pop up so long as the finger contacts the screen for a while within the range. 7. Enable Double Touch" will do the work to prevent the false touch. Instructions see Attachment : Setting of touchscreen in strong light, rain and snow condition. Serial port Settings 1. Installation of the driver
  • Samsung 400TSN | User Manual (ENGLISH) - Page 46
    Serial Port. Attachment The general setting of touchscreen Select "Mouse Emulation" mode, then choose "Enable Touch" Send Right ClickEnable DoubleClick. In general functions of Enable Delay Touch and False touch rejection may not selected to avoidslowing the touch response. It is proved null if you
  • Samsung 400TSN | User Manual (ENGLISH) - Page 47
    Click and press on any area on the screen for two second, the right-click menu touch. The unit is millisecond. Setting of touchscreen in strong light, rain and snow condition The snow and rain drop will be mistakenly a single touch. So the function of "False touch rejection" maybe selected in driver
  • Samsung 400TSN | User Manual (ENGLISH) - Page 48
    1. Each value should be gradually set in "Delay Touch Settings" after fulfillment of "Enable Delay Touch". "Delay" is set to 40 and "Area" to 16. 2. Enter count : It means how many times you click to approach the setting value within 3 seconds. Then driver will install the function of "False
  • Samsung 400TSN | User Manual (ENGLISH) - Page 49
    between a PC and a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a display. Main Screen Click Start > Program > Samsung > MDC System to start the program. Select a set to see the volume of the selected set within the slider.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 50
    Main Icons Remocon Safety Lock Port Selection Select Button Info Grid Display Selection Control Tools 1. Use the main icons to switch into each screen. 2. Allows you to enable or disable the remote control signal receiving function of the display unit. 3. Set the Safety Lock function. When setting
  • Samsung 400TSN | User Manual (ENGLISH) - Page 51
    stored in the program and used for the next program as well. Power Control 1. Click Power Control of the main icons and the Power Control screen appears.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 52
    Info Grid shows some basic information necessary to Power Control. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Use the Select All button or Check Box to choose a display to control. Power Control allows controlling some of the functions of the selected display. 1) Power On/
  • Samsung 400TSN | User Manual (ENGLISH) - Page 53
    are available only for the displays whose power status is ON. Input Source 1. Click Input Source of the main icons and the Input Source control screen appears. Click Select All or use Check Box to select a display to control. • TV Mode • PC Mode
  • Samsung 400TSN | User Manual (ENGLISH) - Page 54
    for the displays whose power status is ON. Image Size PC, BNC, DVI 1. Click Image Size of the main icons and the Image Size control screen appears.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 55
    status is ON. Image Size TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV 1. Click Image Size of the main icons and the Image Size control screen appears.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 56
    DVI (HDCP) is 720p or 1080i. (The Auto Wide mode is available only for TV, AV, and S-Video.) 4) The screen modes can only be adjusted when a TV (PAL only) is connected and the Image Size item is set to Auto Wide. status is ON. Time 1. Click Time of the main icons and the Time Control screen appears.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 57
    Model. At On Time Setup, MagicInfo Source functions only for MagicInfo Model. PIP PIP Size 1. Click PIP of the main icons and the PIP control screen appears. Click Select All or use Check Box to select a display to control.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 58
    . PIP Size can be controlled with turning on the LCD Display power. PIP PIP Source 1. Click PIP of the main icons and the PIP control screen appears.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 59
    selected display to HDMI. Note: Some of the PIP Sources may not be available for selection, depending on the input source type of the Main Screen. The Input source of MagicInfo works only on MagicInfo model. The PIP Control feature is available only for the displays whose power status is ON
  • Samsung 400TSN | User Manual (ENGLISH) - Page 60
    the set and displays it on the slide bar. When "Select All" is chosen, the default value is displayed. Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Picture - Available only for TV, AV, S-Video, Component, HDMI, DTV. 2) Contrast - Adjusts Contrast of the selected
  • Samsung 400TSN | User Manual (ENGLISH) - Page 61
    value for the set and displays it on the slide bar. When "Select All" is chosen, the default value is displayed. Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Picture PC - Available only for PC, BNC, DVI. 2) Contrast - Adjusts Contrast of the selected display
  • Samsung 400TSN | User Manual (ENGLISH) - Page 62
    the set and displays it on the slide bar. When "Select All" is chosen, the default value is displayed. Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Audio - Controls audio settings for all input sources. 2) Bass - Adjusts Bass of the selected display. 3) Treble
  • Samsung 400TSN | User Manual (ENGLISH) - Page 63
    displays for which the power status is ON. Maintenance Lamp Control 1. Click on the "Maintenance" icon in the Main Icon column to display the Maintenance screen.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 64
    display regardless of the time. The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control. The Maintenance Control feature is available only for the displays whose power status is ON. the "Maintenance" icon in the Main Icon column to display the Maintenance screen.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 65
    screen to be moved finely at the specified time interval. 3) Safety Screen - The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor and Eraser types, it can be set to 10, 20, 30, 40 or 50. For the All White and Pattern type, it can be
  • Samsung 400TSN | User Manual (ENGLISH) - Page 66
    a number in the selected mode. z The MDC program supplied by Samsung supports up to 5x5 LCD Displayes. 3) On / Off - Turns on/off the Video Wall function of the selected display. 4) Format - The format can be selected to see a divided screen. z Full z Natural You may not operate this function in
  • Samsung 400TSN | User Manual (ENGLISH) - Page 67
    manner. Rerun the program and turn the remote function again to Restore normal functions. This program may malfunction due to problems in communication circuits or interference from electronic appliances nearby. Settings Value Display In Multiple Display Mode When there are more than one
  • Samsung 400TSN | User Manual (ENGLISH) - Page 68
    → [Input] → ENTER → [Source List] → , → ENTER Use to select PC, DVI or other external input sources connected to the LCD Display. Use to select the screen of your choice. 1. PC 2. DVI 3. AV 4. HDMI 5. MagicInfo Note • The direct button on the remote control is the 'SOURCE' button. • For PC and DVI
  • Samsung 400TSN | User Manual (ENGLISH) - Page 69
    Adjusting the LCD Display → , → ENTER Name the input device connected to the input jacks to make your input source selection easier. 1. PC 2. DVI 3. AV 4. HDMI Picture [PC / DVI / MagicInfo Mode] Available Modes • PC / DVI • AV • HDMI • MagicInfo Note The TV menu is available when a TV tuner box is
  • Samsung 400TSN | User Manual (ENGLISH) - Page 70
    depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. MENU → → ENTER → [Picture] → → ENTER → [Custom] (Not available in Dynamic Contrast mode
  • Samsung 400TSN | User Manual (ENGLISH) - Page 71
    Adjusting the LCD Display Sharpness MENU → → ENTER → [Picture] → → ENTER → [Custom ENTER → [Sharpness] → , → ENTER Adjusts the Sharpness. Color Tone MENU → → ENTER → [Picture ENTER → [Color Tone] → , → ENTER The color tones can be changed. (Not available in Dynamic Contrast mode of On.) 1. Off 2.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 72
    Adjusting the LCD Display Red MENU → → ENTER → [Picture ENTER → [Color Control] → ENTER → [Red] → , → ENTER Green MENU → → ENTER → [Picture ENTER → [Color Control] → → ENTER → [Green] Blue → , → ENTER MENU → → ENTER → [Picture ENTER → [Color Control ENTER → [Blue] → , → ENTER Color Temp.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 73
    → → ENTER → [Picture ENTER → [Image Lock] → ENTER → [Coarse] Fine → , → ENTER Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. MENU → → ENTER → [Picture ENTER → [Image Lock] → → ENTER
  • Samsung 400TSN | User Manual (ENGLISH) - Page 74
    Adjusting the LCD Display (Not available in Dynamic Contrast mode of On.) Note The direct button on the remote control is the 'AUTO' button. Signal Balance This is used to make up for the weak RGB signal transmitted by a long signal cable. MENU → → ENTER → [Picture ENTER → [Signal Balance] (
  • Samsung 400TSN | User Manual (ENGLISH) - Page 75
    Adjusting the LCD Display 3. B-Gain MENU → → ENTER → [Picture ENTER → [Signal Balance] → ENTER → → [Signal Control ENTER→ [B-Gain] → , → ENTER 4. R-Offset MENU → → ENTER → [Picture ENTER → [Signal Balance] → ENTER → → [Signal Control ENTER→ [R-Offset] → , → ENTER 5. G-Offset MENU → → ENTER → [
  • Samsung 400TSN | User Manual (ENGLISH) - Page 76
    Adjusting the LCD Display 1. 16:9 2. 4:3 Dynamic Contrast MENU → → ENTER → [Picture ENTER → [Dynamic Contrast] → , → ENTER Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. 1. Off 2. On Picture [ AV / HDMI Mode] Available Modes
  • Samsung 400TSN | User Manual (ENGLISH) - Page 77
    On.) 1. Dynamic 2. Standard 3. Movie 4. Custom Note The direct button on the remote control is the 'P.MODE' button. Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. MENU → → ENTER → [Picture] → → ENTER → [Custom] (Not available in Dynamic
  • Samsung 400TSN | User Manual (ENGLISH) - Page 78
    . Color Tone MENU → → ENTER → [Picture ENTER → [Color Tone] → , → ENTER The color tones can be changed. The individual Color components are also user adjustable. (Not available in Dynamic Contrast mode of On.) 1. Off 2. Cool2 3. Cool1 4. Normal 5. Warm1 6. Warm2 Note If you set the Color Tone to
  • Samsung 400TSN | User Manual (ENGLISH) - Page 79
    Adjusting the LCD Display Color Temp. MENU → → ENTER → [Picture ENTER → [Color Temp.] Size → , → ENTER Color temp is a measure of the 'warmth' of the image colors. (Not available in Dynamic Contrast mode of On.) Note This function is only enabled if the Color Tone is set to Off. MENU → → ENTER →
  • Samsung 400TSN | User Manual (ENGLISH) - Page 80
    Adjusting the LCD Display → , → ENTER Turns the Digital Noise Reduction feature Off/On. The Digital Noise Reduction feature allows you to enjoy clearer and crisper images. 1. Off 2. On Film Mode MENU → → ENTER → [Picture ENTER → [Film Mode ] → , → ENTER The Film Mode feature offers you a theater-
  • Samsung 400TSN | User Manual (ENGLISH) - Page 81
    Adjusting the LCD Display Sound Available Modes • PC / DVI • AV • HDMI • MagicInfo Mode Note The TV menu is available when a TV tuner box is installed. MENU ENTER → [Sound] → ENTER → [Mode] → , → ENTER The LCD Display has a built-in high fidelity stereo amplifier. 1. Standard Selects Standard
  • Samsung 400TSN | User Manual (ENGLISH) - Page 82
    Adjusting the LCD Display Bass Note • You can hear the sound even when sound value is set to 0. • If you adjust sound using Custom function, Mode will turn to Custom mode. MENU ENTER → [Sound] → → ENTER → [Custom ]→ENTER→ [Bass] → , → ENTER Emphasizes low frequency audio. Treble MENU ENTER → [
  • Samsung 400TSN | User Manual (ENGLISH) - Page 83
    TS XT MENU ENTER → [Sound ENTER → [SRS TS XT] → , → ENTER SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including
  • Samsung 400TSN | User Manual (ENGLISH) - Page 84
    Adjusting the LCD Display You can choose one of 13 languages. Note The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. Time Selects from one of 4 time settings, Clock Set, Sleep Timer, On Timer, and Off Timer. MENU ENTER → [Setup] → →
  • Samsung 400TSN | User Manual (ENGLISH) - Page 85
    Adjusting the LCD Display 5. 120 6. 150 7. 180 On Timer MENU ENTER → [Setup] → → ENTER → [Time ENTER→ [On Timer] ENTER Turns the LCD Display on automatically at a preset time. Controls the mode and the volume level at the time the LCD Display turns on automatically. Off Timer MENU ENTER → [
  • Samsung 400TSN | User Manual (ENGLISH) - Page 86
    Adjusting the LCD Display Change the transparency of the background of the OSD. 1. High 2. Medium 3. Low 4. Opaque Safety Lock PIN MENU ENTER → [Setup ENTER → [Safety Lock PIN ] → [0∼9, 0∼9, 0∼9, 0∼9] → [0∼9, 0∼9, 0∼9, 0∼9] → [0∼9, 0∼9, 0∼9, 0∼9] The password can be changed. Energy Saving MENU
  • Samsung 400TSN | User Manual (ENGLISH) - Page 87
    Adjusting the LCD Display → , → ENTER When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected. In this case, adjust the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 88
    aspect ratio intact. Horizontal MENU ENTER → [Setup ENTER → [Video Wall ENTER → [Horizontal] → , → ENTER Sets how many parts the screen should be divided horizontally. Five adjustment levels: 1, 2, 3, 4, and 5. Vertical MENU ENTER → [Setup ENTER → [Video Wall ENTER → [Vertical] → , → ENTER
  • Samsung 400TSN | User Manual (ENGLISH) - Page 89
    function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time. • The Safety Screen function scrolls the screen for the specified period of time. • This function is not available when the power is turned off. MENU ENTER → [Setup ENTER
  • Samsung 400TSN | User Manual (ENGLISH) - Page 90
    ] → ENTER → [Pixel Shift ENTER → [Vertical Line] → , → ENTER Time Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4. MENU ENTER → [Setup ENTER → [Safety Screen] → ENTER → [Pixel Shift ENTER → [Time] → , → ENTER Set the time interval for performing the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 91
    1. Off 2. On Mode MENU ENTER → [Setup ENTER → [Safety Screen] → → ENTER → [Timer] → → ENTER → [Mode] → , → ENTER You can change the Safety Screen Type. 1. Scroll 2. Bar 3. Eraser Period MENU ENTER → [Setup ENTER → [Safety Screen] → → ENTER → [Timer ENTER → [Period] → , → ENTER Use this function
  • Samsung 400TSN | User Manual (ENGLISH) - Page 92
    a time for execution. • Mode-Scroll : 1~5 sec • Mode-Bar, Eraser : 10~50 sec Scroll MENU ENTER → [Setup ENTER → [Safety Screen ENTER → [Scroll] This function prevents after-images on the screen by moving all the pixels on the LCD according to a pattern. Use this function when there are remaining
  • Samsung 400TSN | User Manual (ENGLISH) - Page 93
    , 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x768 @ 60Hz, by using this function(Resolution Select), you can have the picture displayed on the screen in the specified resolution. Note Available in PC mode only 1. Off 2. 1024 X 768 3. 1280 X 768 4. 1360 x 768 5. 1366 X 768 Note Selecting the menu is
  • Samsung 400TSN | User Manual (ENGLISH) - Page 94
    to be longer to avoid overvoltage. Side Gray MENU ENTER → [Setup ENTER → [Side Gray] → , → ENTER Select the brightness of the grey for the screen background. 1. Off 2. Light 3. Dark Reset Reverts the product settings to factory defaults. The Reset function is only available when PC / DVI is being
  • Samsung 400TSN | User Manual (ENGLISH) - Page 95
    Adjusting the LCD Display Note Available in PC mode only Note The Reset function is not available when Video Wall is On. Color Reset MENU ENTER → [Setup ENTER → [Reset ]→ → ENTER → [Color Reset ] → , → ENTER OSD Rotation MENU ENTER → [Setup ENTER → [OSD Rotation ] → , → ENTER OSD Rotate 1.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 96
    Adjusting the LCD Display Multi Control Available Modes • PC / DVI • AV • HDMI • MagicInfo Multi Control Assigns an individual ID to the SET. MENU ENTER → [Multi Control ] → ENTER → , → [0~9] • ID Setup Assigns distinctive IDs to the SET. • ID Input Use to select the transmitter functions of the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 97
    not to turn off the AC power during an operation. • For pivoted LCD Displays, ticker transparency is not supported. • For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for movies. • For drive D:, EWF is not applied. • When the contents of Setup have been changed when
  • Samsung 400TSN | User Manual (ENGLISH) - Page 98
    the language you want to use. 3. Press the Install button. If you select Do not show again and click the Install button, the Scheduler screen is displayed after rebooting. 4. Connect your keyboard and mouse and press the "ALT + F12" keys on your keyboard. 5. The Windows Desktop is displayed and
  • Samsung 400TSN | User Manual (ENGLISH) - Page 99
    Adjusting the LCD Display Photo Auto Note To finish the MagicInfo, press ALT + F12. The JPEG, BMP file format are supported. Automatically fits the image to the window. Original Shows the properties of the original file.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 100
    Slide Show Adjusting the LCD Display Displays the properties of the original file as they are. Interval Controls the time intervals between image files for a slide show. (5 Sec, 10 Sec, 20 Sec, 30 Sec, 60 Sec)
  • Samsung 400TSN | User Manual (ENGLISH) - Page 101
    Rotation Adjusting the LCD Display Zoom Displays an image file by turning it clockwise by 90 degrees. Displays a reduced picture.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 102
    Close Adjusting the LCD Display Music Closes the image control Menu. The MP3 file format is supported. Movie The MPEG1, WMV file format are supported.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 103
    Play Adjusting the LCD Display Plays a movie file. Full Size Plays a movie file in full screen.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 104
    the LCD Display PPT(Power Point), DOC(MS Word), XLS(MS Excel), PDF, HTML, HTM files are displayed. Note • Install the proper viewer(freeware) program to see the MS Office(Word, Excel, Power Point) or PDF doucuments. Internet Setup Connects to the Internet Sets various functions in MagicInfo mode
  • Samsung 400TSN | User Manual (ENGLISH) - Page 105
    Schedule View Adjusting the LCD Display Displays a schedule. TCP/IP Changes the TCP/IP settings.
  • Samsung 400TSN | User Manual (ENGLISH) - Page 106
    Connection Adjusting the LCD Display Modifies the network settings. Password The password can be changed. • The password should be between 6 and 12 characters in numeric format. (You should enter a password between 6 and 12 characters in numeric format) • If you enter the wrong password three
  • Samsung 400TSN | User Manual (ENGLISH) - Page 107
    Setup mode. File Local : You can delete or copy files on both local and removable disks. Play Option You can set the repeat play and screen settings. Repeat : Determines the repeat option for playing movies and music. • None - Select No Repeat to play a movie or tune in the list only once
  • Samsung 400TSN | User Manual (ENGLISH) - Page 108
    play movies or tunes in the list in sequence repeatedly. Rotation - Sets the picture orientation. • Landscape - Sets the screen resolution to 1366x768 pixels. • Portrait - Sets the screen resolution to 1366x768 pixels. EWF(Enhanced Write Filter) : Prevents change to and loss of the data saved on the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 109
    Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the LCD Display. 2. Unplug the video cable from the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 110
    , this can cause the LCD Display to become blank, have poor coloring, become noisy, and video mode not supported, etc. In this case, first check the source of the problem, and then contact a Service Center or your dealer. 1. Check if the power cord and the video cables are properly connected to the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 111
    Troubleshooting A: Check if the signal cable between the computer and the LCD Display is securely connected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: The screen in the range supported by the LCD
  • Samsung 400TSN | User Manual (ENGLISH) - Page 112
    Troubleshooting Q: The screen color is inconsistent. A: Adjust color using Custom under OSD Color screen when you pressing the MENU button, check the cable connection between the LCD Display and the computer to ensure that the connector is properly connected. Problems related to Audio Note Problems
  • Samsung 400TSN | User Manual (ENGLISH) - Page 113
    frequency? A: The frequency can be changed by reconfiguring the video card. Note That video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) Q: How can I Adjusts the resolution? A: Windows XP: Set the resolution in the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 114
    Troubleshooting Set the resolution in the Control Panel → Appearance and Themes → Display → Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). A: Windows ME/2000: Set the resolution at the Control Panel → Display → Screen video supports the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 115
    Specifications General General Model Name SyncMaster 400TSn-2, 460TSn-2 LCD Panel Size Display area Pixel Pitch SyncMaster 400TSn-2 SyncMaster 460TSn-2 SyncMaster 400TSn-2 SyncMaster 460TSn-2 SyncMaster 400TSn-2 SyncMaster 460TSn-2 40 " Diagonal (101 cm) 46 " Diagonal (116 cm) 885.6 mm (H) X
  • Samsung 400TSN | User Manual (ENGLISH) - Page 116
    SyncMaster 400TSn-2 973.2 x 584.4 x 128.1 mm / 38.3 x 23.0 x 5.0 inch (Without Stand) SyncMaster 460TSn Stand) / 34.3 kg / 75.6 lbs VESA Mounting Interface 600 x 400 mm Environmental considerations Operating Temperature : 50°F ~ 104°F (10°C ~ 40 user it without any problems. For example, the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 117
    see MS Office (Word, Excel, Power Point) or PDF docu- ments. Not Support Flash, Java Applet, Security Site MagicInfo - Server Requirement Minimum your computer to set up this feature. State Power Indicator Power Con- 400TSn-2 sumption 460TSn-2 Normal Operation On 228 W 310 W Power saving mode
  • Samsung 400TSN | User Manual (ENGLISH) - Page 118
    screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen 500 31.500 36.000 40.000 50.000 49. screen has to repeat the same image many times per second to display an image to the user
  • Samsung 400TSN | User Manual (ENGLISH) - Page 119
    it without any problems. • For example, the number of TFT-LCD sub pixels contained in this product are 6,220,800. When cleaning the monitor and the panel adjustment, use the Fine/Coarse adjustment function. When viewing a fixed screen for an extended period of time, a residual image or blurriness may
  • Samsung 400TSN | User Manual (ENGLISH) - Page 120
    20 hours in use • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one color or a moving image is recommended. Change the Color Information periodically Note Use Two
  • Samsung 400TSN | User Manual (ENGLISH) - Page 121
    in use. • The best way to protect your monitor from Image retention is to turn Power off, or set your PC, or System to operate a Screen Saver program when you are not using it. Also Warranty service will be limited based on instruction guide. Apply the Screen Scroll function on Product • Apply the
  • Samsung 400TSN | User Manual (ENGLISH) - Page 122
    Black Color move up and down. - Select method • Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Bar • Time Interval : 1 ~ 10 hours ( Recommend : 1 ) • Time Period : 10 ~ 50 second ( Recommend : 50 ) Note ( Please check CD's User Guide at "OSD Function", some model's will not available
  • Samsung 400TSN | User Manual (ENGLISH) - Page 123
    Information - Select method • Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Eraser • Time Interval : 1 ~ 10 hours ( Recommend : 1 ) • Time Period : 10 ~ 50 second ( Recommend : 50 ) Note ( Please check CD's User Guide at "OSD Function", some model's will not available )
  • Samsung 400TSN | User Manual (ENGLISH) - Page 124
    or comments relating to Samsung products, please contact the SAMSUNG customer care center. U.S.A CANADA MEXICO North America 1-800-SAMSUNG(726-7864) http://www.samsung.com/us 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca 01-800-SAMSUNG (726-7864) http://www.samsung.com/mx ARGENTINA BRAZIL
  • Samsung 400TSN | User Manual (ENGLISH) - Page 125
    - 607 - 93 - 33 808 20 - SAMSUNG http://www.samsung.com/pt (7267864) 0800-SAMSUNG (726-7864) http://www.samsung.com/sk 902 - 1 - SAMSUNG(902 172 http://www.samsung.com/es 678) 075 - SAMSUNG (726 78 64) http://www.samsung.com/se 0848 - SAMSUNG (7267864, http://www.samsung.com/ch CHF 0.08/min) 0845
  • Samsung 400TSN | User Manual (ENGLISH) - Page 126
    www.samsung.com/ae 8000-4726 Terms Dot Pitch Vertical Frequency Horizontal Frequency The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot Pitch'. Unit: mm The screen must
  • Samsung 400TSN | User Manual (ENGLISH) - Page 127
    the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the screen is composed of 1920 horizontal dots (horizontal resolution) and 1080 vertical lines (vertical resolution). This feature outputs sonorous and vivid 3D
  • Samsung 400TSN | User Manual (ENGLISH) - Page 128
    battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product user replaceable. For information on its replacement, please contact your service provider. Authority Information in this document is subject to change without notice. © 2009 Samsung
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
SyncMaster 400TSn-2/460TSn-2
LCD Monitor
User Manual