Samsung 920BW User Manual (ENGLISH)

Samsung 920BW Manual

Get Samsung 920BW PDF manuals and user guides View all Samsung 920BW manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung 920BW manual content summary:

  • Samsung 920BW | User Manual (ENGLISH) - Page 1
    Install drivers Install programs SyncMaster 940BW/941BW/920BW
  • Samsung 920BW | User Manual (ENGLISH) - Page 2
    the equipment. Prohibited Do not disassemble Do not touch Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to active
  • Samsung 920BW | User Manual (ENGLISH) - Page 3
    many extension cords or plugs to one outlet. z This may cause fire. Do not disconnect the power cord while using the monitor. z A surge may be caused by the separation and may damage the monitor. Do not use the power cord when the connector or plug is dusty. z If the connector or plug of the
  • Samsung 920BW | User Manual (ENGLISH) - Page 4
    care, as someone, specifically children may trip over it. Keep any flammable objects such as candles, insecticides or cigarettes away from the product. z Otherwise, this may cause fire.A melted coating may cause electric shock or fire. Keep any heating devices away from the power cable. z A melted
  • Samsung 920BW | User Manual (ENGLISH) - Page 5
    the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10 cm/4 inches) if children play with it. Clean When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. Do
  • Samsung 920BW | User Manual (ENGLISH) - Page 6
    has accumulated in the interior over an extended period of time may cause a malfunction or fire. Others Do not remove the cover (or back). z This may cause electric shock or fire. z Refer to a qualified servicing company. If your monitor does not operate normally - in particular, if there is any
  • Samsung 920BW | User Manual (ENGLISH) - Page 7
    or the casing is damaged, turn the monitor off and unplug the power cord. Then contact the Service Center . z The monitor may malfunction, causing electric shock or fire. Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time. z Failure to do so
  • Samsung 920BW | User Manual (ENGLISH) - Page 8
    shock or fire. If an alien substances or water enters the product, turn the product off, unplug the power connector from the wall outlet and contact the Service Center. When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. z Change the mode to energy
  • Samsung 920BW | User Manual (ENGLISH) - Page 9
    of about 45 ~ 50 cm between your eyes and the monitor screen. Look at the screen from slightly above it, and have the monitor directly in front of you. z Tilt the monitor upwards by 10 ~20 degrees. Adjust the monitor height so that the top of the monitor is slightly below eye level. z Adjust the
  • Samsung 920BW | User Manual (ENGLISH) - Page 10
    so that the panel operates at its original response speed. (Note : If you turn the power off and on again after switching RTA off, the RTA function is automatically switched On (Factory Setting) Please make sure the following items are included with your monitor. If any items are missing, contact
  • Samsung 920BW | User Manual (ENGLISH) - Page 11
    Monitor & Sliding Stand Manual Quick Setup Guide Cable Warranty Card (Not available in all locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software D-sub Cable Power Cord DVI Cable (option) Front
  • Samsung 920BW | User Manual (ENGLISH) - Page 12
    here to see an animation clip Brightness button [] When OSD is not on the screen, push the button to adjust brightness. Adjust buttons [ ] Adjust items in the message appears in the upper left of the screen displaying the current mode -- analog or digital input signal.) Note : If you select
  • Samsung 920BW | User Manual (ENGLISH) - Page 13
    light glows blue during normal operation, and blinks blue once as the monitor saves your adjustments. See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended
  • Samsung 920BW | User Manual (ENGLISH) - Page 14
    1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN
  • Samsung 920BW | User Manual (ENGLISH) - Page 15
    3. Select Digital using the SOURCE button. 2. DVI-HDMI cable 1. The HDMI terminal of digital DVD player is connected to the DVI IN terminal of the monitor using the HDMI-DVI cable. 2. Then, start the DVD with a DVD disc inserted. 3. Select Digital using the SOURCE button. Using the Stand
  • Samsung 920BW | User Manual (ENGLISH) - Page 16
    Monitor and Bottom Sliding Stand A. Stand Stopper Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
  • Samsung 920BW | User Manual (ENGLISH) - Page 17
    protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base. Installing the Monitor Driver
  • Samsung 920BW | User Manual (ENGLISH) - Page 18
    will be posted on Samsung Monitor homepage http://www.samsung.com/. 5. Monitor driver installation is completed. Installing the Monitor Driver (Manual) Windows XP | Windows 2000 |Windows Me |Windows NT | Linux When prompted by the operating system for the monitor driver, insert the CD-ROM included
  • Samsung 920BW | User Manual (ENGLISH) - Page 19
    4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next" and then click "Have disk". 7. Click the "Browse"
  • Samsung 920BW | User Manual (ENGLISH) - Page 20
    installation doesn't damage your system.The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button then click "OK" button continually. 10. Monitor driver installation is completed. Microsoft® Windows® 2000 Operating System When you can see
  • Samsung 920BW | User Manual (ENGLISH) - Page 21
    the screen is not normal, change to a different mode (lower mode of resolution, colors or frequency). If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide. Linux Operating System To execute X-Window
  • Samsung 920BW | User Manual (ENGLISH) - Page 22
    Then, the initial screen of the program Natural Color will be executed. Click Natural Color on the initial screen to install the Natural Color software. To install the program manually, insert the CD included with the Samsung monitor into the CDROM Drive, click the [Start] button of Windows and then
  • Samsung 920BW | User Manual (ENGLISH) - Page 23
    1. [ ]Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 2. [ ]This button allows you to adjust items in the menu. 3. [ ]Press this button to activate a highlighted menu item. 4. [AUTO]Press to self-adjust
  • Samsung 920BW | User Manual (ENGLISH) - Page 24
    button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video with more accuracy. - If you change resolution in the control panel, auto function will be executed automatically. Locked
  • Samsung 920BW | User Manual (ENGLISH) - Page 25
    the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can adjust only the brightness and contrast of the monitor with the OSD adjustment locking feature. MagicBright™ Menu MagicBright™ Description Push the MagicBright button to circle through available preconfigured modes
  • Samsung 920BW | User Manual (ENGLISH) - Page 26
    Brightness Menu Brightness Description When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu SOURCE Description Selects the video signal while the OSD is off.
  • Samsung 920BW | User Manual (ENGLISH) - Page 27
    MagicColor Coarse Language Auto Source Contrast Color Tone Fine H-Position Image Reset Color Control Sharpness V-Position Color Reset Gamma H-Position Transparency RTA V-Position Display Time Picture Menu Brightness Contrast Description You can use the on-screen menus to change the brightness
  • Samsung 920BW | User Manual (ENGLISH) - Page 28
    Description MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right
  • Samsung 920BW | User Manual (ENGLISH) - Page 29
    . [MENU MENU] Gamma correction changes the luminance of the colors with intermediate luminance. z Mode 1 z Mode 2 z Mode 3 [MENU MENU] Image Menu Coarse Fine Description Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center
  • Samsung 920BW | User Manual (ENGLISH) - Page 30
    Position Changes the clearance of image. [MENU MENU] Changes the horizontal position of the monitor's entire display. (Available in analog mode only) [MENU MENU] Changes the vertical position of the monitor's entire display. (Available in analog mode only) [MENU MENU] OSD Menu Description You
  • Samsung 920BW | User Manual (ENGLISH) - Page 31
    Reset Color Reset RTA Description Select Auto Source for the monitor to automatically select the signal source. [MENU MENU] Image parameters are replaced with the factory default values. [MENU MENU] Color parameters are replaced with the factory default values. [MENU MENU] RTA(Response Time
  • Samsung 920BW | User Manual (ENGLISH) - Page 32
    (Note : If you turn the power off and on again after switching RTA off, the RTA function is automatically switched On (Factory Setting)) [MENU MENU] Information Menu Information Description Shows a video source, display mode on the OSD screen. [MENU → , → MENU]
  • Samsung 920BW | User Manual (ENGLISH) - Page 33
    software utility that allows monitor adjustment and color tuning using the Display Data Channel Command Interface (DDC/CI) protocol. All adjustments to the display are controlled via software to eliminate the need to use the monitor on-screen display (OSD). MagicTune™ supports Windows™ 2000, XP Home
  • Samsung 920BW | User Manual (ENGLISH) - Page 34
    depending on specification of computer system or monitor. If that happens, press F5 Key. Installation Problems The installation of MagicTune™ can be affected by such factors as the video card, motherboard and the network environment. See "Troubleshooting" if you have trouble during installation
  • Samsung 920BW | User Manual (ENGLISH) - Page 35
  • Samsung 920BW | User Manual (ENGLISH) - Page 36
    | Troubleshooting Calibration MagicTune™ allows for quick accurate tuning of the display with the ability to easily save and use monitor configurations that are best suited for you. z OSD mode may appear inconsistent with the explanation in guidance book depending on specification of each monitor
  • Samsung 920BW | User Manual (ENGLISH) - Page 37
    be different according to monitor models. Some monitor will only support Four modes( Warm, Normal, Cool, Custom) Color Control Adjusts of the monitor image color. You can change the monitor color to your desired color. z R- G - B Calibration The process through which the colors of your choice
  • Samsung 920BW | User Manual (ENGLISH) - Page 38
    get the play screen highlighted (it will be supported in players of Gom, Adrenalin, KCP, Window Media, and Power DVD etc., )Some other players also can be highlighted but could have some problems. { Tusk menu HUE Adjust the tint of the color. Saturation Adjusts the color saturation. Brightness
  • Samsung 920BW | User Manual (ENGLISH) - Page 39
    Test z Reset - To reset the monitor settings to the factory defaults. When external A/V devices such as VCRs or DVDs are connected to the monitor, PIP allows you to watch video from those devices in a small window super-imposed on the PC Video signal. (Off / On) PIP Turn the PIP Screen on or
  • Samsung 920BW | User Manual (ENGLISH) - Page 40
    Key to Source Select ColorTone Set Customized Key to ColorTone Support Tab Definition Shows the Asset ID and the version number Manual) if you need any help installing or running MagicTune™ . The User Manual opens within a basic browser window. you can use the server to control the Client monitor
  • Samsung 920BW | User Manual (ENGLISH) - Page 41
    Installation | OSD Mode | | Uninstall | Troubleshooting Calibration Color Calibration 1. Color Calibration Color Calibration guides you to get optimal color condition for your monitor. Proceed following 5steps for getting optimal monitor color condition . 1. Control "Brightness control bar" for
  • Samsung 920BW | User Manual (ENGLISH) - Page 42
    Color Overview | Installation | OSD Mode | | Uninstall | Troubleshooting Calibration Uninstall The MagicTune™ program can be removed only by using the "Add or Remove Programs" option of the Windows Remove Programs" screen, scroll down support for MagicTune™ , FAQs (questions and answers) and
  • Samsung 920BW | User Manual (ENGLISH) - Page 43
    to see the Troubleshooting section. An error occurs when replacing the monitor with a new one when the system power is off but the system has not been restarted. Please restart the system each time the monitor is replaced before using MagicTune™ . An error occurs when the video card driver is not
  • Samsung 920BW | User Manual (ENGLISH) - Page 44
    If you do not adjust to the optimal resolution and perform Color Calibration, the monitor cannot be adjusted to the optimal condition. Refer to the manual for the optimal resolution. This video card does not support MagicTune™ . Please install a new video card driver. An error occurs when the video
  • Samsung 920BW | User Manual (ENGLISH) - Page 45
    cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/magictune MagicTune™ doesn't Have you changed your PC work properly. or video graphic card? Download the latest
  • Samsung 920BW | User Manual (ENGLISH) - Page 46
    this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. Symptom No images on the screen. I cannot turn on the monitor. Check List Is the power cord connected properly? Can you see "Check
  • Samsung 920BW | User Manual (ENGLISH) - Page 47
    , Plug & Play (VESA DDC) monitor found". Have you installed the monitor driver? Install the monitor driver according to the Driver Installation Instructions. See the video card manual to see if the Plug & Play (VESA DDC) function can be supported. Install the monitor driver according to the
  • Samsung 920BW | User Manual (ENGLISH) - Page 48
    the following items if there is trouble with the monitor. 1. Check if the power cord and the video cables are properly connected to the computer. 2. Check if the computer beeps more than 3 times when booting. (If it does, request an a service for the main board of the computer.) 3. If you installed
  • Samsung 920BW | User Manual (ENGLISH) - Page 49
    or the screen saver. (Refer to Windows/Computer Manual). How can I clean the outer case/LCD Panel? Disconnect the power cord and then clean the monitor with a soft Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor. If your monitor screen remains
  • Samsung 920BW | User Manual (ENGLISH) - Page 50
    the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer. z Judging
  • Samsung 920BW | User Manual (ENGLISH) - Page 51
    Model Name SyncMaster 940BW LCD Panel Size 19 " Wide Diagonal (48 cm) Display area 410.4 mm (H) x 256.5 mm (V) Pixel Pitch 0.285 mm (H) x 0.285 mm (V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1440 x 900
  • Samsung 920BW | User Manual (ENGLISH) - Page 52
    Less than 1 W (120 Vac / 220 Vac) Power off (Power S/W OFF) Black Less than 0 W This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY
  • Samsung 920BW | User Manual (ENGLISH) - Page 53
    number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called Vertical Frequency or Refresh Rate. Unit: Hz
  • Samsung 920BW | User Manual (ENGLISH) - Page 54
    Model Name SyncMaster 941BW LCD Panel Size 19 " Wide Diagonal (48 cm) Display area 410.4 mm (H) x 256.5 mm (V) Pixel Pitch 0.285 mm (H) x 0.285 mm (V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1440 x 900
  • Samsung 920BW | User Manual (ENGLISH) - Page 55
    Less than 1 W (120 Vac / 220 Vac) Power off (Power S/W OFF) Black Less than 0 W This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY
  • Samsung 920BW | User Manual (ENGLISH) - Page 56
    number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called Vertical Frequency or Refresh Rate. Unit: Hz
  • Samsung 920BW | User Manual (ENGLISH) - Page 57
    Model Name SyncMaster 920BW LCD Panel Size 19 " Wide Diagonal (48 cm) Display area 410.4 mm (H) x 256.5 mm (V) Pixel Pitch 0.285 mm (H) x 0.285 mm (V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1440 x 900
  • Samsung 920BW | User Manual (ENGLISH) - Page 58
    Less than 1 W (120 Vac / 220 Vac) Power off (Power S/W OFF) Black Less than 0 W This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY
  • Samsung 920BW | User Manual (ENGLISH) - Page 59
    number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called Vertical Frequency or Refresh Rate. Unit: Hz
  • Samsung 920BW | User Manual (ENGLISH) - Page 60
    COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA TRINIDAD & TOBAGO VENEZUELA Latin America 0800-333-3733 4004-0000 800-726-7864 (SAMSUNG) 01-8000112112 0-800-507-7267 1-800-10-7267 800-6225 1-800-299-0013 1-800-234-7267 800-7267 1-800-682-3180 1-800-751-2676 1-800
  • Samsung 920BW | User Manual (ENGLISH) - Page 61
    OF IRELAND SLOVAKIA SPAIN SWEDEN SWITZERLAND U.K 38 322 887 09 693 79 554 08 25 3260 (€ 0,15/min) 01805 - 121213 (€ 0,14/Min) 06-80-SAMSUNG (7267864) 800 SAMSUNG (7267864) 02 261 03 710 0900 20 200 88 (€ 0,10/Min) 231 627 22 0 801 801 881 80 8 200 128 0818 717 100 0800
  • Samsung 920BW | User Manual (ENGLISH) - Page 62
    ://www.samsung.com/mea Terms Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot Pitch'. Unit: mm Vertical Frequency The screen must be redrawn several times per
  • Samsung 920BW | User Manual (ENGLISH) - Page 63
    of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD. { Resolution: 1440 X 900 { Vertical frequency (refresh rate): 60 Hz 2. TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one
  • Samsung 920BW | User Manual (ENGLISH) - Page 64
    416, Mae tan-3dong, Yeongtong - gu, Suwon City, Gyeonggi-do Korea
  • Samsung 920BW | User Manual (ENGLISH) - Page 65
    hours in use - Turn the power off for 2 hours after 12 hours in use z Use a Screen saver if possible - Screen saver in one color or a moving image is recommended. z Set the Monitor to power off with the PC Display Properties Power Scheme. Suggestions for specific applications Ex) Airports, Transit
  • Samsung 920BW | User Manual (ENGLISH) - Page 66
    Ex) The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video
  • Samsung 920BW | User Manual (ENGLISH) - Page 67
    harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
Install drivers
Install programs
SyncMaster 940BW/941BW/920BW