Samsung BD-FM59 User Manual Ver.1.0 (English) - Page 16

Connecting to an Audio System, Method 1 Connecting to an HDMI supported AV receiver

Page 16 highlights

Connections Connecting to an Audio System You can connect the Blu-ray player to the audio system using the methods illustrated below. -- Do not connect the power cord to the wall outlet until you have made all the other connections. -- When you change the connections, turn off all devices before you start. Method 1 Connecting to an HDMI supported AV receiver • Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your receiver. • Best quality (Recommended) Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder • Using a digital Optical cable (not supplied), connect the Optical Digital Audio Out jack on the product to the Digital Optical In jack of the receiver. • Good quality • You will hear sound only through the front two speakers with Digital Output set to PCM. Method 1 Audio Method 2 Audio | 16 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

Connections
Connecting to an Audio System
You can connect the Blu-ray player to the audio system using the methods illustrated below.
-
Do not connect the power cord to the wall outlet until you have made all the other connections.
-
When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI supported AV receiver
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your receiver.
Best quality (Recommended)
Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder
Using a digital Optical cable (not supplied), connect the Optical Digital Audio Out jack on the product to
the Digital Optical In jack of the receiver.
Good quality
You will hear sound only through the front two speakers with Digital Output set to PCM.
Audio
Audio
Method 2
Method 1
|
16
English