Samsung CLX 6240FX User Manual (ENGLISH) - Page 78
Understanding display messages, MESSAGE, MEANING, SUGGESTED, SOLUTIONS
UPC - 635753721089
View all Samsung CLX 6240FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
UNDERSTANDING DISPLAY MESSAGES Messages appear on the control panel display to indicate the machine's status or errors. Refer to the tables below to understand the messages' meaning and correct the problem if necessary. Messages and their meanings are listed in alphabetical order. • If the message is not in the table, cycle the power and try the printing job again. If the problem persists, call for service. • Some messages may not appear in the display depending on options or models. • xxx indicates the media type. • yyy indicates the tray. MESSAGE [COMM. Error] [Incompatible] [Line Error] [No Answer] [Stop Pressed] [yyy] Paper Empty [yyy] Paper Mismatch [yyy] Cassette Out Adjusting... Registration Authentication Failure MEANING SUGGESTED SOLUTIONS The machine has a communication problem. Ask the sender to try again. The machine has received a fax from which is registered as a junk fax. The received fax data will be deleted. Reconfirm junk fax setup. See page 56 Your machine cannot connect with the receiving fax machine or has lost contact because of a problem with the phone line. Try again. If the problem persists, wait an hour or so for the line to clear and try again. Or, turn the ECM mode on. See page 56. The receiving fax machine has not answered after several redial attempts. Try again. Make sure that the receiving machine is operational. Stop/Clear has been pressed during an operation. Try again. There is no paper in the tray. Load paper in the tray. The paper size specified in the printer properties does not match the paper you are loading. Load the correct paper in the tray. The tray cassette is not properly closed. To close the tray, lower the rear edge, align it with the slot, and slide it into the printer. The machine is adjusting the color registration Wait a few minutes. The ID or password you entered is incorrect. Enter the correct ID or password. 78 _Troubleshooting MESSAGE Cancel? W Yes X Connection Error MEANING Your machine's memory has become full while trying to store an original into memory. Connection with the SMTP server failed. SUGGESTED SOLUTIONS To cancel the fax job, press the OK button to accept Yes. If you want to send those pages that have been successfully stored, press the OK button to accept No. You should send the remaining pages later, when memory is available. Check the server settings and the network cable. Connection Failed DADF Cover Open Error Data Read Fail Check USB Mem. Data Write Fail Check USB Mem. Document Jam Door Open/Check Transfer Belt Duplex Jam 0 Check Inside Duplex Jam 1 Open/Close Door Enter Again File Access Denied File Format Not Supported The protocol you have entered is not supported or server port is wrong. Check the protocol or server port. The DADF cover is Close the DADF cover not securely latched. until it locks into place. Time expired while reading data. Try again. Storing to the USB memory failed. Check the available USB memory space. The loaded original has jammed in the DADF (or ADF). Clear the jam. See page 71. The front cover is not Close the cover until it securely latched. locks into place. Paper has jammed during duplex printing. This is applicable only to machines with this feature. Clear the jam. See page 73. Paper has jammed during duplex printing. This is applicable only to machines with this feature. Clear the jam. See page 73. You entered an unavailable item. Enter the correct item again. Login to the network server was successful. However, access to the file on the network server was denied. Change the server settings. The selected file format is not supported. Use the correct file format.