Samsung CLX 6240FX User Manual (ENGLISH) - Page 80

in Rear Cover, Open/Close Door - service manual

Page 80 highlights

MESSAGE Not Assigned Not Available Try Again Later NonSAMSUNG Toner T One Page is Too Large Operation Not Assigned Out-Bin Full Paper Jam 0 Open/Close Door Paper Jam 1 Open/Close Door Paper Jam 2 Check Inside Power Failure Remove Paper in Rear Cover MEANING SUGGESTED SOLUTIONS The speed button or speed dial number you tried to use has no number assigned to it. Enter the number manually using the number keypad or store the number or address. Can not perform the task immediately because too many tasks are running at once. Try again when current task is completed. The color toner cartridge which the arrow indicates is not a Samsung-genuine cartridge. Press OK to toggle the message to Stop or Continue. W Stop X You can select either Stop or Continue with the left/right arrow. If you select Stop by pressing OK on the control panel, the machine stops printing. If you select Continue, the machine keeps printing, but the quality cannot be guaranteed. If you do not select any, the machine will work as Stop is selected. Replace the corresponding toner cartridge with a Samsung-genuine cartridge. See page 66. Single page data exceeds the configured mail size. Reduce the resolution and try again. You are in the Add Page/Cancel Job operation, but there are no jobs stored. Check the display to see if there are any scheduled jobs. The output tray of the Remove paper. machine is full of paper. Paper has jammed in Clear the jam. See page the feeding area of the 73. tray. Paper has jammed inside the machine. Clear the jam. See page 75. Special print media has jammed in the paper exit area. Clear the jam. See page 76. Power has turned off then on and the machine's memory has not been back up. The job which you were trying to do before the power failure must be completely re-done. Paper has jammed in Clear the jam. See page the paper rear cover 76. area. 80 _Troubleshooting MESSAGE Refilled Toner T Replace Toner T Replace [xxx] Replace [xxx] Soon Retry Redial? Reverse Jam 0 Check Inside Reverse Jam 1 Check Inside Scanner locked Self Diagnostics Temperature Self Diagnostics LSU Send Error (AUTH) Send Error (DNS) Send Error (POP3) Send Error (SMTP) MEANING SUGGESTED SOLUTIONS The toner cartridge you have installed is not genuine or refilled. The print quality may get poor if the refilled toner cartridge is installed, since its characteristics may significantly differ from the genuine. We recommend Samsung-genuine color toner cartridge. This message appears between Toner Empty and Toner Low status. Replace the toner cartridge with a new one. See page 66. The life of the part expires totally. Replace the part with a new one. Call for service. The life of the part expires soon. See page 69 and call for service. The machine is waiting for a specified time interval to redial a previously busy station. You can press OK to immediately redial, or Stop/Clear to cancel the redial operation. Paper has jammed in the paper fuser area and In the cover of reverse unit area. Clear the jam. See page 76. Paper has jammed In the cover of reverse unit area or in the rear cover. Clear the jam. See page 75. The scanner module Unlock the scanner and is locked press Stop/Clear. The engine in your machine is checking problems detected. Wait a few minutes. The LSU (Laser Scanning Unit) in your machine is checking problems detected. Wait a few minutes. There is a problem in Configure the SMTP authentication. authentication setting. There is a problem in Configure the DNS DNS. setting. There is a problem in Configure the POP3 POP3. setting. There is a problem in Change to the available SMTP. server.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161

80 _
Troubleshooting
Not Assigned
The speed button or
speed dial number
you tried to use has
no number assigned
to it.
Enter the number
manually using the
number keypad or store
the number or address.
Not Available
Try Again Later
Can not perform the
task immediately
because too many
tasks are running at
once.
Try again when current
task is completed.
NonSAMSUNG
Toner
The color toner
cartridge which the
arrow indicates is not
a Samsung-genuine
cartridge.
Press
OK
to toggle
the message to
Stop
or
Continue
.
Stop
You can select either
Stop
or
Continue
with
the left/right arrow.
If you select
Stop
by
pressing
OK
on the
control panel, the
machine stops printing.
If you select
Continue
,
the machine keeps
printing, but the quality
cannot be guaranteed.
If you do not select any,
the machine will work as
Stop
is selected.
Replace the
corresponding toner
cartridge with a
Samsung-genuine
cartridge. See page 66.
One Page is
Too Large
Single page data
exceeds the
configured mail size.
Reduce the resolution
and try again.
Operation
Not Assigned
You are in the
Add
Page
/
Cancel Job
operation, but there
are no jobs stored.
Check the display to see
if there are any
scheduled jobs.
Out-Bin Full
The output tray of the
machine is full of
paper.
Remove paper.
Paper Jam 0
Open/Close Door
Paper has jammed in
the feeding area of the
tray.
Clear the jam. See page
73.
Paper Jam 1
Open/Close Door
Paper has jammed
inside the machine.
Clear the jam. See page
75.
Paper Jam 2
Check Inside
Special print media
has jammed in the
paper exit area.
Clear the jam. See page
76.
Power Failure
Power has turned off
then on and the
machine’s memory
has not been back up.
The job which you were
trying to do before the
power failure must be
completely re-done.
Remove Paper
in Rear Cover
Paper has jammed in
the paper rear cover
area.
Clear the jam. See page
76.
MESSAGE
MEANING
SUGGESTED
SOLUTIONS
Refilled Toner
The toner cartridge
you have installed is
not genuine or refilled.
The print quality may get
poor if the refilled toner
cartridge is installed,
since its characteristics
may significantly differ
from the genuine.
We recommend
Samsung-genuine color
toner cartridge.
Replace Toner
This message
appears between
Toner Empty
and
Toner Low
status.
Replace the toner
cartridge with a new one.
See page 66.
Replace
[xxx]
The life of the part
expires totally.
Replace the part with a
new one. Call for
service.
Replace
[xxx] Soon
The life of the part
expires soon.
See page 69 and call for
service.
Retry Redial?
The machine is
waiting for a specified
time interval to redial
a previously busy
station.
You can press
OK
to
immediately redial, or
Stop/Clear
to cancel the
redial operation.
Reverse Jam 0
Check Inside
Paper has jammed in
the paper fuser area
and In the cover of
reverse unit area.
Clear the jam. See page
76.
Reverse Jam 1
Check Inside
Paper has jammed In
the cover of reverse
unit area or in the rear
cover.
Clear the jam. See page
75.
Scanner locked
The scanner module
is locked
Unlock the scanner and
press
Stop/Clear
.
Self Diagnostics
Temperature
The engine in your
machine is checking
problems detected.
Wait a few minutes.
Self Diagnostics
LSU
The LSU (Laser
Scanning Unit) in your
machine is checking
problems detected.
Wait a few minutes.
Send Error
(AUTH)
There is a problem in
SMTP authentication.
Configure the
authentication setting.
Send Error
(DNS)
There is a problem in
DNS.
Configure the DNS
setting.
Send Error
(POP3)
There is a problem in
POP3.
Configure the POP3
setting.
Send Error
(SMTP)
There is a problem in
SMTP.
Change to the available
server.
MESSAGE
MEANING
SUGGESTED
SOLUTIONS