Samsung CLX-9352NA Installation Guide Easy Manual Ver.3.00 (English)
Samsung CLX-9352NA Manual
View all Samsung CLX-9352NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Samsung CLX-9352NA manual content summary:
- Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 1
- Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 2
from or related to use of this user's guide. • Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd. • PCL and PCL 6 Adobe System, Inc. • UFST® and MicroType™ are registered trademarks of Monotype Imaging Inc. • TrueType, Mac and Mac OS are trademarks of Apple Inc., registered - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 3
Copyright_ 2 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 4
Contentds ABOUT THIS INSTALLATION GUIDE SETTING UP THE toner cartridges 14 Installing the imaging units 16 CLX-9252/9352 Series 16 SCX-8230/8240 Series 21 Installing other options 26 Loading paper 27 Standard tray 27 Connecting a printer connected machine's driver 53 Windows 53 Contentds_ 3 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 5
-step instructions. This installation guide is valuable for both novice and professional users. You can refer to this as a guide for installing and setting up the machine. • Read the safety information before using the machine. • If you have a problem using the machine, refer to the troubleshooting - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 6
from Samsung or the dealership where you bought the machine. This chapter gives you step-by-step instructions for setting toner cartridges • Installing the imaging units • Installing other options • Loading paper • Connecting a printer drivers and diagonal-cutting pliers. Setting up the hardware_ 5 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 7
The body of this machine weighs about 113.4 Kg (250.00 lbs) to the maximum including the trays. Use safe lifting and handling techniques. If you need to move this machine, you need at least four people. Use the lifting handles, as shown. If less than four people attempt to lift the machine, you can - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 8
Installation environment Make sure to have the below recommended environment before you install the machine. • Range of temperature - Operation: 10 and 32 °C (50 and 90 °F) - Storage: -20 and 40°C (-4 and 104 °F) • Range of humidity - Operation: 20 and 80% RH - Storage: 10 and 90% RH • Select a - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 9
Machine configuration Setting up the hardware_ 8 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 10
by models The machine is designed to support all of your document needs from printing o: Optional, blank: not available) CLX-9252 SERIES CLX-9352 SERIES o o o o o o o o o o o o o o o o o o o o SCX-8230 SERIES SCX-8240 SERIES o o o o o o o o o o o o o o o o o o o o o Setting up the hardware_ 9 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 11
Install Toner Cartridges and Imaging Units. Do you need to install the Standard finisher or the Booklet finisher? Yes No Install the Bridge kit. Install the Finisher. Yes No Install purchased other optional goods. Load paper into the trays of the machine. Connect a printer - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 12
items may differ depending on the country TONER CARTRIDGE IMAGING UNIT CLX-9252/9352 Series CLX-9252/9352 Series SCX-8230/8240 Series POWER CORD & USB CABLE SCX-8230/8240 Series INSTALLATION GUIDE & WARRANTY CARD SOFTWARE CD & USER'S GUIDE CD RUBBER PACKING(2) 3. Remove all the tapes - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 13
high capacity feeder When you purchased this machine, you would have chosen one of the below items. To install the item, refer to its installation guide. CABINET STAND DUAL CASSETTE FEEDER HIGH CAPACITY FEEDER Setting up the hardware_ 12 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 14
Removing the scanner locking screw You need to remove the screw locking the scanner. If you do not remove it, you cannot use the copy and scan functions. We recommend you keep the screw in the accessory box. You need to lock the scanner when moving the machine or when the machine is not in use for a - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 15
. CLX-9252/9258NA/9352/9358NA Series SCX-8230/8238NA/8240/8248NA Series 2. Take the new toner cartridges out from their packages. 3. Thoroughly shake the new toner cartridge side to side five or six times to distribute the toner evenly inside the toner cartridge. 4. Pull the sealed tape out - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 16
gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. 5. Hold the new toner cartridge by the handle and slide it into its corresponding positions until it locks into place. Leave the front cover opened. CLX-9252/9258NA/9352/ - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 17
Installing the imaging units Follow the steps below: CLX-9252/9352 Series 1. Squeeze the left/right locking levers and push outward at the same time. Then remove the waste toner container. 2. Squeeze and push down the lever, and open the inner cover. Setting up the hardware_ 16 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 18
3. Take the new imaging units out from their packages. Do not use sharp objects, such as a knife or scissors, to open the imaging unit package. You could damage the surface of the imaging unit. 4. Remove the paper protecting the surface of the imaging unit. 5. Remove the tape on the handle. Setting - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 19
the shutter, and pull the rubber stopper out of the developer. 7. Remove the tape wrapped around the developer. 8. Remove the tape on the imaging uint. 9. Pull out the OPC protecting pad. If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 20
than a few minutes. Cover it with a piece of paper to protect it if necessary. 10. Labels inside the machine identify each imaging unit's position. Hold the handles on the new imaging unit, and push the imaging unit until it locks into place. 11. Close the inner cover. Setting up the hardware_ 19 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 21
12. Insert the waste toner container until it locks in place. 13. Close the front cover. If the front cover is not completely closed, the machine will not operate. Setting up the hardware_ 20 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 22
SCX-8230/8240 Series 1. Lift the locking lever upward. Then remove the waste toner container. Setting up the hardware_ 21 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 23
2. Open the right door. 3. Remove the new imaging units from its package. Do not use sharp objects, such as a knife or scissors, to open the imaging unit package. You could damage the surface of the imaging unit. Setting up the hardware_ 22 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 24
clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. • Be careful not to scratch the surface of the imaging unit. • To prevent damage, do not expose the imaging unit to light for more than a few minutes. Cover it with a piece of paper to protect - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 25
7. Remove the paper protecting the surface of the imaging unit. 8. Hold the handles on the new imaging unit, and push the imaging unit until it locks into place Setting up the hardware_ 24 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 26
9. Close the right door. 10. Insert the waste toner container until it locks in place. Setting up the hardware_ 25 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 27
featured multi function printer that has been optimized to meet most of the users needs. Recognizing that each user may have different requirements, Samsung makes many options available to enhance the machine's capabilities. Refer to Supplies and Accessories guide on the User's Guide CD. For details - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 28
tray 3. tray 4) or the optional high capacity feeder, refer to the installation guide provided with them. Using photographic paper or coated paper may cause problems requiring repairs. Such repairs are not covered by the warranty or service agreements. 1. Squeeze the lock lever and pull out the tray - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 29
slide it to the end of the tray. 4. Squeeze the paper width guide, and slide it to the end of the tray. 1 Paper length guide 1 Paper width guide 5. Flex or fan the edge of the paper stack to separate the pages before loading papers. When handling the paper, be careful not to get - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 30
6. Load paper with the print side facing up. 7. Adjust the paper legnth guide to the desired paper length. Setting up the hardware_ 29 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 31
stack of paper until it lightly touches the side of the stack. Do not press the guide too tightly to the edge of the paper; the guide may bend the paper. • Do not push the paper width guide too far causing the media to warp. • If you do not adjust the paper width - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 32
on the User's Guide CD. • If you have problems with paper feeding, check the media specification. Then, try placing one sheet at a time in the multi-purpose tray. Refer to User's Guide on the User's Guide CD. • The settings made from the machine driver override the settings on the control panel - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 33
Connecting a printer cable Using a network cable This machine has a bulit-in network interface card. You can connect your machine to a network using a network cable. Connect your machine to the network with a network cable: Setting up the hardware_ 32 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 34
Turning the machine on Keep in mind that you should use the power cord supplied with the machine. Otherwise, it can cause damage or fire to the machine. 1. Plug the power cord into the power receptacle. 2. Plug another side into a properly grounded AC outlet. Setting up the hardware_ 33 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 35
, then wait until power is turned off automatically. If you turn the machine off directly using the power switch, it could cause the hard disk problem in the machine. Setting up the hardware_ 34 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 36
you can see the initial setting menu on the display screen. You need to follow the steps below. You can also change the setting values on the control panel and SyncThruTM Web Service. For the detailed information about setting up the machine, refer to the User's Guide or Administrator's Guide on the - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 37
of the machine in the Location input area. • If necessary, enter the information in the Administrator input area for the person to contact when any problem occurs on the machine. 4. Press the Test button to verify the LAN connection. When Connected appears after pressing Test, press Next. If Not - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 38
5. Press Static and enter the IP address, subnet mask, and gateway in each input area using the pop-up keyboard or the numeric keypad on the control panel. Then press Next. • If a new IP address is assigned automatically by a DHCP or BOOTP, press DHCP or BOOTP. • If you are not sure about your - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 39
), press the right arrow until +4 shows. b. Press Result to check the Manual setting and then press Close. If necessary, try to set it again. c. Press the Host input area. The pop-up keyboard appears. Enter a host name manually. You can also press Host List and then select a host name in Time Server - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 40
8. Select a unit, numeric separation, and standard paper size to be used on the display screen. Then press Next. 9. Select an altitude level where the machine is installed. - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 41
10. Press Community Name input area. The pop-up keyboard appears, and then enter a SNMP Community name and press OK. Then set access permission using Read Access or Write Access. If you do not know SNMP Community, contact your network administrator. Then press Finish. If you want to skip this step, - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 42
adjustment for both cassette feeders is same. The explanation in this user's guide is based on the dual cassette feeder. • If you have installed the keyboard appears. Enter the password which is entered in the initial setting step 6 (See "Press the Name input area." on page 37). Then press OK on the - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 43
7. Press Adjustment > Print Adjustment > Paper Supply > Tray. 8. Press Paper Size > A3 > Print. 9. The machine prints the print test chart. Press Next. Initial settings and testing of the machine_ 42 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 44
10. Place the front of the print test chart face down on the scanner glass. The print test chart has A (Front Side) on the front page. 11. Press Start from the control panel. If you select Apply to all trays, the trays that are not selected also have the print adjustment results appllied. We - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 45
test chart which supplied with DADF. Skew test 1. Load the A4 (or LTR) DADF test chart face up into the DADF. 2. Adjust the document width guides to the paper size. Initial settings and testing of the machine_ 44 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 46
3. Press Copy from the display screen. 4. Press Start from the control panel to begin copying. 5. Compare the condition of the printout with the DADF test chart. For example, the length of scale marks in the circles is equivalent (acceptable range by less or more than 0.5 mm), it means the DADF was - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 47
Otherwise, adjust the DADF using the screw at the backside and handle hinge as shown by the examples below. Initial settings and testing of the machine_ 46 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 48
DADF adjustment 1. Load the A4 (or LTR) DADF test chart face up into the DADF. 2. Adjust the document width guides to the paper size. Initial settings and testing of the machine_ 47 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 49
the ID pressing Recent users. 6. Press Password's input area. The pop-up keyboard appears. Enter the password which is entered in the initial setting step 6 (See "Press the Name input area." on page 37). Then press OK on the pop-up keyboard. 7. Press Domain's input area. The pop-up keyboard appears - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 50
9. Press Adjustment > DADF Adjustment > OK. The machine adjusts the DADF automatically. After the DADF skew test and adjustment, the pop-up window appears on the display screen. Remove the the A4 (or LTR) DADF test chart from the DADF. Initial settings and testing of the machine_ 49 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 51
Initial settings and testing of the machine_ 50 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 52
Windows Image Acquisition (WIA) drivers are available for scanning documents on your machine. • SetIP: Use this program to set your machine's TCP/IP addresses. • Network PC Fax: You can send a fax from your computer without going to the machine. • Samsung Eeasy Printer Mager: Samsung Easy Printer - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 53
GHz 32-bit or 64-bit processor or higher 1 GB (2 GB) 16 GB • Support for DirectX 9 graphics with 128 MB memory (to enable the Aero theme). • DVD-R/W Drive administrator right can install the software. • Windows Terminal Service is compatable with this machine. Macintosh OPERATING SYSTEM CPU - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 54
for working with large scanned images. UNIX ITEM Operating system Free printer driver and supplied software to multiple clients simultaneously. (See Administrator's Guide.) 4. Read License Agreement, and select I accept the terms of the License Agreement. Then, click Next. 5. Follow the instructions - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 55
91-726-7864 0800-333-3733 0-800-05-555 www.samsung.com www.samsung.com www.samsung.com 1300 362 603 0810-SAMSUNG (7267864, € 0.07/min) 088-55-55-555 www.samsung.com www.samsung.com www.samsung.com 8000-4726 www.samsung.com/ae (English) www.samsung.com/ae_ar (Arabic) 810-800-500-55-500 www - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 56
.samsung.com/hk (Chinese) www.samsung.com/hk_en/ (English) www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com Contact SAMSUNG - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 57
www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com/ae (English) www.samsung.com/ae_ar (Arabic) www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 58
WEB SITE www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.ua (Ukrainian) www.samsung.com/ua_ru (Russian) www.samsung.com www.samsung.com www.samsung.com www.samsung.com Contact - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 59
Contact SAMSUNG worldwide_ 58 - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 60
imaging unit 16, 21 optional high capacity feeder 12 optional tray 12 stand 12 toner cartridge 14 L Linux supplied softwares 51 system requirements 52 loading paper in the standard tray 27 M machine configuration 8 Macintosh supplied softwares 51 system requirements 52 N network driver installation - Samsung CLX-9352NA | Installation Guide Easy Manual Ver.3.00 (English) - Page 61