Samsung DMT800RHS User Manual (user Manual) (ver.1.0) (English) - Page 26

Information codes The Control Panel displays information codes to help you understand what is occurring with your dishwasher. If you see any of the codes listed below, you should select the Cancel and Drain option, and then follow the instructions in the Solution column. CODE SYMBOL MEANING Temperature Sensor error SOLUTION Heater error High temperature Heating error Low water level error Half load function error Functional error. With the dishwasher empty, add detergent, and then run a cycle. If the problem continues, go to your house circuit breaker panel, set the dishwasher's circuit breaker switch to off, and then contact an authorized Samsung service center. Water supply error High temperature Water supply error Drain error Over-level water error Leakage Check whether the water supply valve is closed, the water supply is suspended, or the water inlet valve or line is frozen or clogged by foreign particles. If the problem continues, close the water supply valve, and then contact an authorized Samsung service center. Check the temperature of the supplied water. If it is higher than 176 ˚F (80 ˚C), a functional error may occur with the dishwasher. Check whether the drain hose is clogged or folded. If the problem continues, close the water supply valve, and then contact an authorized Samsung service center. Functional error. Close the water supply valve and go to your house circuit breaker panel, set the dishwasher's circuit breaker switch to off, and then contact an authorized Samsung service center. Button error Functional error. Turn off the dishwasher and try to start it again. If the problem continues, contact an authorized Samsung service center. For any codes not listed above, call 1-800-SAMSUNG (726-7864) 26_ troubleshooting