Samsung DV422GWHDWR/AA User Manual Ver.1.0 (English)

Samsung DV422GWHDWR/AA Manual

Get Samsung DV422GWHDWR/AA PDF manuals and user guides View all Samsung DV422GWHDWR/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung DV422GWHDWR/AA manual content summary:

  • Samsung DV422GWHDWR/AA | User Manual Ver.1.0 (English) - Page 1
    , operating, testing, troubleshooting, and disassembly instructions. CAUTION All safety information must be follwed as provided in Service Manual of DV456*,DV422*,DV400*. WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing
  • Samsung DV422GWHDWR/AA | User Manual Ver.1.0 (English) - Page 2
    is very low or high. Action Taken Check for: - Clogged lint screen. - Restricted vent system. - Check Thermistor resistance. HE Invalid heating Temp in running the dryer Check for: - Restricted vent system. - Check Thermistor resistance. Check for: dE Running the dryer with door open - Close
  • Samsung DV422GWHDWR/AA | User Manual Ver.1.0 (English) - Page 3
    ALIGNMENT AND ADJUSTMENTS WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power. TEST MODE Continuous Run Mode: 1. Press Wrinkle Prevent + Dry Level for 7 sec during Power On State (Normal User Mode) . 2. Once
  • Samsung DV422GWHDWR/AA | User Manual Ver.1.0 (English) - Page 4
    avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing Motor(CW) Relay On  Heater Relay On  Heater Relay Off, Motor(CW) Relay Off How to Enter: - While in Power Off, pressing the Dry Level + Power keys simultaneously will put the dryer
  • Samsung DV422GWHDWR/AA | User Manual Ver.1.0 (English) - Page 5
    repair guide. Caution for the Repair and Replacement Please follow below instruction for the trouble diagnosis and parts replacement. 1) As some electronic components are damaged by the charged static electricity from the resin part of dryer or the human body, prepare the human body earth or remove
  • Samsung DV422GWHDWR/AA | User Manual Ver.1.0 (English) - Page 6
    before servicing, unless testing requires power. No Problem 1 Will Not Start or Run 2 Motor runs/ tumbler will not turn 3 Runs a few minutes and then stops 4 Blows fuses or trips circuit breaker Blows fuses or trips 5 circuit breaker (Gas Model) 6 Will not heat (motor runs) Will Not Dry
  • Samsung DV422GWHDWR/AA | User Manual Ver.1.0 (English) - Page 7
    TROUBLE SHOOTING WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power. No Problem What To Do If the igniter does not heat up, remove power and using an ohmmeter, check the following: • Open flame sensor 8
  • Samsung DV422GWHDWR/AA | User Manual Ver.1.0 (English) - Page 8
    personal injury or death; disconnect power to dryer before servicing, unless testing requires power. COMPONENT TESTING PROCEDURES Component Electrical Testing (with ohmmeter)   Thermistor resistance 10K Ω @ 25°C 77°F  Thermostat 1 resistance < 1Ω Belt Cut-off S/W - Lever open: Resistance value
  • Samsung DV422GWHDWR/AA | User Manual Ver.1.0 (English) - Page 9
    TROUBLE SHOOTING WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power. GAS MODEL Radiant Sensor(10RS) Resistance value < 1 Ω If resistance is infinite, replace Radiant sensor Gas Valve(25M01A) Valve 1-2 :
  • Samsung DV422GWHDWR/AA | User Manual Ver.1.0 (English) - Page 10
    TROUBLE SHOOTING WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power. CN1 1. AC Power Port 2. Door Detection Sensor 3. Motor Switch Sensor RY7 - Heater Relay Switch RY5 - Motor Relay Switch Sensor Bars &
  • Samsung DV422GWHDWR/AA | User Manual Ver.1.0 (English) - Page 11
    TROUBLE SHOOTING WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing electrical system to a 3-wire, the ground strap must be reconnected to the terminal block support to ground the Dryer the service technician. 3. Loosen or remove the center
  • Samsung DV422GWHDWR/AA | User Manual Ver.1.0 (English) - Page 12
    WIRING DIAGRAM WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power. WIRING DIAGRAM 12 [HUDSON]_Technical_information-03171A_EN.indd 12 2012-02-03 �� 5:01:24
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
1
CLOTHES DRYER
Technical Information
CAUTION
All safety information must be follwed as provided in Service Manual of
DV456*,DV422*,DV400*
.
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to dryer
before servicing, unless testing requires power.
Code No. : DC68-03171A_EN
•
Due to possibility of personal injury or property damage, always contact an authorized
technician for servicing or repair of this unit.
•
Refer to Service Manual (DV456*,DV422*,DV400*) for detailed installation, operating, testing,
troubleshooting, and disassembly instructions.
[HUDSON]_Technical_information-03171A_EN.indd
1
2012-02-03
�� 5:01:21