Samsung FX510BGS User Manual - Page 55

Stainless steel surFaces

Page 55 highlights

maintaining your appliance 3. To unlock the controls and the door, press and hold the CONTROL/DOOR LOCK pad for 3 seconds. To unlock just the controls, hold the door slightly open while pressing and holding the CONTROL/DOOR LOCK pad for 3 seconds. The oven will beep, and Loc and the Lock icon will disappear from the display. Close the oven door, if you are holding it open. Stainless steel surfaces Do not use a steel-wool pad or abrasive cleaners on stainless steel surfaces. WARNING Abrasive pads and cleaners will scratch the surface and damage the surface finish. To prevent any discolorations and/or grease stains, we recommend cleaning and removing any spills, spots, and grease from the range after each use. 1. Wipe off any spills with damp, soft cloth. 2. Apply an approved stainless steel cleaner to a damp, clean cloth or paper towel. Clean a small area carefully following the instructions on the cleaner. Stainless steel should always be cleaned with the grain in the stainless steel, if applicable. 3. Dry and buff with a clean, dry, soft cloth. 4. Repeat steps 2 and 3 as necessary. Stainless steel surfaces Do not spray any type of cleaner into the manifold panel holes. Within these WARNING holes are ignition switches which carry the current that lights the surface burners. Spraying into them could damage the range. FX710BGS_FX510BGS_DG68-00356A-01.indd 55 maintaining your appliance _55 2011-08-19 �� 4:25:57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

maintaining your appliance _
55
mAINTAINING yOUR APPLIANCE
3.
To unlock the controls and the door, press and hold the
CONTROL/DOOR LOCK pad for 3 seconds.
To unlock just the controls, hold the door slightly open
while pressing and holding the CONTROL/DOOR
LOCK pad for 3 seconds.
The oven will beep, and Loc and the Lock icon will
disappear from the display. Close the oven door, if you
are holding it open.
Stainless steel surFaces
Do not use a steel-wool pad or abrasive cleaners on stainless steel surfaces.
Abrasive pads and cleaners will scratch the surface and damage the surface
finish.
To prevent any discolorations
and/or grease stains, we
recommend cleaning and
removing any spills, spots, and
grease from the range after each
use.
1.
Wipe off any spills with damp, soft
cloth.
2.
Apply an approved stainless steel
cleaner to a damp, clean cloth or
paper towel. Clean a small area
carefully following the instructions
on the cleaner. Stainless steel
should always be cleaned with
the grain in the stainless steel, if
applicable.
3.
Dry and buff with a clean, dry, soft
cloth.
4.
Repeat steps 2 and 3 as necessary.
Do not spray any type of cleaner into the manifold panel holes. Within these
holes are ignition switches which carry the current that lights the surface
burners. Spraying into them could damage the range.
WARNING
WARNING
Stainless steel
surFaces
FX710BGS_FX510BGS_DG68-00356A-01.indd
55
2011-08-19
�� 4:25:57