Samsung FX510BGS User Manual - Page 72
Gas Pressure Regulator shut off - installation manual
View all Samsung FX510BGS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Surface burners do not light. Surface burner clicks during operation. The burners do not burn evenly. Very large or yellow surface burner flames. Surface burners light but oven burners do not light. Display goes blank. Very large or yellow oven burner flames. Food does not bake or roast properly in the oven. The control knob is not set properly. Burner caps not in place Burner base misaligned The control knob has been left in the LITE position. Surface burner components and grates are not assembled correctly and level. Surface burners are dirty. The air-gas ratio is not correct. The oven control lockout is turned on. Gas Pressure Regulator shut off switch is in the 'off position. The electrical outlet Ground Fault Interrupter (GFI or GFCI) has been tripped and needs to be reset. Your digital control has been damaged. The oven burner air adjustment shutters need to be adjusted. Gas supply is not properly connected or turned on. The oven controls have not been set properly. The oven racks have not been positioned properly for the foods being cooked. Incorrect cookware or cookware of improper size being used. Oven thermostat needs adjustment. There is aluminum foil on racks and/or oven bottom. Clock or timers not set correctly. Push in the control knob and turn it to the LITE position. Clean electrodes. Put the burner cap on the burner head Make burner base aligned After the burner lights, turn the control knob to a desired setting. If the burner still clicks, contact a service technician. See the Installation Instructions. Clean surface burner components. (See pages 58 and 59.) Contact your installer. The burner manifold ports may need to be changed to correct the ratio or for LP gas conversion. The display will show the Lock icon. Hold the oven door open and press the CONTROL/DOOR LOCK pad for 3 seconds. The oven will beep and the Lock icon will turn off. Call a qualified service technician. Replace fuse or reset circuit breaker. Call for a qualified service technician. See the Installation Instructions that came with your range. See control function instructions in this manual. See page 30. See page 24. See page 33. Remove foil. See pages 28 and 29. 72_ troubleshooting FX710BGS_FX510BGS_DG68-00356A-01.indd 72 2011-08-19 �� 4:26:04