Samsung HMX-U10RN Win 2000/xp/2003/vista ( 6.53

Samsung HMX-U10RN Manual

UPC - 036725302754

Add to My Manuals
Save this manual to your list of manuals

Samsung HMX-U10RN | Win 2000/xp/2003/vista ( 6.53 - Page 1
How To Update The Firmware On Your HMX‐U10 To install firmware on your U10 camcorder, follow the steps below: 1. Power off your camcorder. 2. Plug your camcorder into your PC using the USB cable provided with your camcorder. 3. Turn on your Camcorder 4. [Left Click] on the file above to download the
Samsung HMX-U10RN | Win 2000/xp/2003/vista ( 6.53 - Page 2
file on your desktop (KPJSSU10M.bin) and [Left Click] "Copy" 7. [Double Click] "My Computer" 8. [Double Click] the "Removable Drive" associated with the Samsung Camera Note: In the removable drive there will be folders labeled "DCIM" and "MISC" 9. [Right Click] any empty space in the drive and [Left
Samsung HMX-U10RN | Win 2000/xp/2003/vista ( 6.53 - Page 3
sure Battery is fully charged OR use AC Adaptor while completing the update. Failure to do so could result in permanent damage to the camcorder 1. Press and hold [Photo] (Figure 1 below), while holding the photo button press and hold [Power](Figure 2 below) 2. "FW is Updating" will appear on your
Samsung HMX-U10RN | Win 2000/xp/2003/vista ( 6.53 - Page 4
4. The camcorder will automatically turn OFF after the "Samsung" logo is displayed. Note: If the firmware upgrade fails you will receive a message, FW update NG or FW update XX. If either of these messages appear power off your camcorder and repeat step 1‐5 again.