Samsung HP-R4252 Quick Guide (easy Manual) (ver.1.0) (English)
Samsung HP-R4252 Manual
View all Samsung HP-R4252 manuals
Add to My Manuals
Save this manual to your list of manuals |
Samsung HP-R4252 manual content summary:
- Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 1
Owner's Instructions HP-R4252 HP-R5052 This device is a Class B digital apparatus. Register your product at www.samsung.com/global/register - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 2
and images, and primarily display full screen moving images, not stationary patterns or dark bars. On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 3
of the screen when displaying a still image. Altitude The PDP will not operate normally at altitudes above 6500 ft. Heat on the top of the PDP TV The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 4
, the digital cable service provider or CableCARD may display messages on the TV screen to help or give you further information. Please contact your local cable provider for more information on service availability and how to acquire a CableCARD. Notes • This television receiver supports the copy - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 5
stations are running full power or not and how close your location is Commission's OTARD Rule (part of the Telecommunications Act TV antenna system to each apartment. 4. Can I connect my DTV set-top receiver to my cable TV service? Cable TV systems use a different method for transmitting digital TV - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 6
Table of Contents General Information Your New Plasma Display Panel 10 Remote Control Buttons 13 Wall Installation Instructions 15 How to assemble the Stand-Base 19 Connections Connecting VHF and UHF Antennas 22 Connecting Cable TV 23 Connecting CableCARD 25 Connecting a VCR 26 Connecting a - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 7
94 Picture Guide 125 Reminder List 129 Using the CableCARD 131 Using the CableCARD Setup Function ..........132 Appendix Troubleshooting 136 Care and Maintenance 137 Specifications 138 Dimensions (HP-R4252 139 Dimensions (HP-R5052 141 Note • The information contained in this User's Manual - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 8
- Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 9
PLASMA DISPLAY PANEL General Information Your New Plasma Display Panel 10 Remote Control Buttons 13 Wall Installation Instructions 15 How to assemble the Stand-Base 19 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 10
CH or CH to change channels. Also used to move up or down in the on-screen menu. ˆ (Enter) button Press to confirm a selection. Ø Power button Press to turn the TV on and off. Power indicator - Power Off : Blue - Power On : Off ∏ Remote Control Sensor Aim the remote control towards this spot on the - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 11
you have unpacked your TV, check to make sure that you have all the parts shown here. If any piece is missing or broken, call your dealer. Owner's Instructions Remote Control (BN59-00462A) / AAA Batteries Power Cord (3903-000144) Anynet Cable (BN39-00518A) The following parts are sold separately - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 12
to the Anynet Owner's Instruction. This jack is for connecting to other Samsung Anynet-enabled devices. ˝ COMPONENT IN 1, 2 Video (Y/PB/PR) and audio (L-AUDIO-R) component inputs. Ô CableCARDTM Insert the CableCARD into the slot. ANT (75Ω) 75Ω Coaxial connector for Antenna/Cable Network. Ò AV IN - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 13
Remote Control Buttons Remote Control Œ POWER button Turns the TV on and off. ´ GUIDE button Press to display the on-screen Electronic Program Guide (EPG). ˇ ANTENNA button Press to select "Air" or "Cable". ¨ Number buttons ˆ - button Press to select additional channels (digital and analog) being - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 14
broadcast). - SET button Used during set up of this Samsung remote control, so that it will work compatibly with other devices (VCR, Cable Box and DVD). - PIP button Activates picture in picture. ÷ PIP control buttons CH , : Displays the available channels in sequence. (These buttons change channels - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 15
Wall Installation Instructions Refer to the correct installation guide according to your wall bracket. Installation Notes 1 Contact a technician for installing the wall bracket. 2 Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 16
into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bit to drill holes deeper than 35 mm. Fix each anchor in the - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 17
Fixing the TV panel to the wall attachment panel bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1 Remove the 4 screws on the back of the product. 2 Insert the screw into the plastic hanger. (See the figure below) - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 18
How to Adjust Mounting Angle Note : Adjust the bracket angle to -2° before installing it on the wall. 1. Fix the product to the wall bracket. 2. Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the angle. (See the figure to the right) 3. You can - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 19
How to assemble the Stand-Base 1 Using the 4 screws for securing the stand pegs and the monitor, firmly attach the monitor to the stand pegs. (The exterior of the set may be different than the picture.) Warning Firmly secure the stand to the TV before moving it, as the stand may fall and could cause - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 20
- Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 21
PLASMA DISPLAY PANEL Connections Connecting VHF and UHF Antennas 22 Connecting Cable TV 23 Connecting CableCARD 25 Connecting a VCR 26 Connecting a Camcorder 27 Connecting a DVD Player 28 Connecting a DTV Receiver 29 Connecting to HDMI (High Definition Multimedia Interface 30 Connecting a - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 22
Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. 1 Plug the antenna lead into the ANT 2 IN (AIR IN) on the TV. Use an antenna cable. (Sold Separately) 22 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 23
Connecting Cable TV You can connect different cable systems to your TV, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels. Cable without a Cable Box 1 Plug the incoming cable into the ANT 1 IN (CABLE IN) on the TV. Use an antenna cable. (Sold - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 24
will need a two-way splitter, an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store). 1 Find and disconnect the cable that is connected to the ANTENNA IN terminal of your Cable box. This terminal might be labeled "ANT IN", "VHF IN" or simply - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 25
You must obtain a CableCARD from a local cable service provider. TV Power cord From cable TV Please insert the card as shown. How to Connect 1 Insert the CableCARD into the "CableCARD" slot and the message "CableCARD Inserted" is displayed on the screen. If the channel information does not - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 26
Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack TV Power cord VCR Audio cable Video cable S-Video cable How to Connect Connect the Video/Audio cables between the VIDEO or S-VIDEO/AUDIO input jacks on the TV and VIDEO or S-VIDEO/AUDIO output jacks on the VCR. (Note: For better - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 27
match the color coded input terminals and cable jacks. Viewing Tapes 1. Turn on your TV. 2. Press the SOURCE button to select "AV" or "S-Video". 3. Turn on your camcorder and set it to video mode. (For details, refer to your camcorder owner's instructions.) 4. Insert the tape into the camcorder and - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 28
a DVD Player (480i, 480p) Playing DVD TV Power cord DVD Player Component cable Audio cable How to Connect 1 Connect the Y, PB, PR (COMPONENT1, 2) input jacks on the TV to the Y, PB, PR output jacks on the DVD player using a component cable. 2 Connect the AUDIO L/R (COMPONENT1, 2) input jacks - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 29
Connecting a DTV Receiver (480p, 720p, 1080i) This TV displays the optimum picture in 720p mode. Watching DTV TV Power cord DTV Receiver Component cable Audio cable HDMI/DVI cable How to Connect 1 Connect the cable or antenna to the antenna input jack on the DTV. 2 Connect the Y, PB, PR ( - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 30
DTV Set-Top Box using an HDMI cable. Note • Please make sure the HDMI source's power is on before selecting HDMI from the "Source List" on the TV. To Watch DTV: 1. Turn on your TV. 2. Turn on your DTV receiver. • For an explanation of HDMI video, see your DTV receiver owner's instructions. 3. Press - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 31
to the HDMI input jack on the TV, High-Definition pictures can be displayed on the screen in their digital form. Connecting to HDMI (High Definition Multimedia Interface)/DVI Compatible TV Power cord DTV Set-Top Box HDMI/DVI cable Audio cable From cable or Antenna How to Connect 1 Connect the - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 32
, see your audio system owner's manual. TV Power cord Digital Audio System Coaxial cable Optical cable How to Connect 1 If your TV. Be certain to remove the black cover from the optical output before inserting the cable. 3 If your system has both coaxial and optical digital audio inputs, SAMSUNG - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 33
Connecting to an Analog Amplifier TV Power cord Audio cable Analog Amplifier How to Connect 1 The "AUDIO OUT (AUDIO L/R)" terminals terminals: Decrease the gain (volume) of the audio amplifier, turn the TV's internal mute on and adjust the volume level with the volume control of the amplifier. 33 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 34
- Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 35
PLASMA DISPLAY PANEL Operation Turning the TV On and Off 36 Viewing the Menus and Displays 40 Memorizing the Channels 41 Adding and Erasing Channels 44 Setting Up Your Remote Control 47 Viewing an External Signal Source 49 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 36
setting the time. Note • The Plug & Play function operates after plugging in the TV for the first time. 1 Press the POWER button on the remote control. The message "Menu language, Channels and Time will be set." is displayed. Press the ENTER button, then "Select the language of the OSD." menu is - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 37
ANT 2 IN are connected, select the "Air + Cable". • If the CableCARD is inserted into the "CableCARD" slot on the rear panel, "Cable" and "Air + Cable" are not available. When selecting Cable TV : Press the ▲ or ▼ button to select "Cable" or "Air + Cable", then press the ENTER button. Plug & Play - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 38
. Press the ▲ or ▼ button to select "Yes" or "No", then the ENTER button. "Select the time zone in which you live" menu is automatically displayed. Plug & Play Auto Program in progress. Cable Channel 67 Stop Enter Skip Plug & Play Auto Program is completed. 14 Channels were memorized. Air - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 39
button. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2 Press the ENTER button to select "Plug & Play". TV Setup Plug & Play Language Time V-Chip Caption Menu Transparency † More √ : English √ √ √ √ : Medium √ Move Enter Return i Menu language, Channels and Time - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 40
menus disappear from the screen automatically after about two minutes or you can press the MENU or EXIT button on your remote control to exit the menu. Move Enter Return Displaying Status Information Press the INFO button on the remote control. The TV will display the Picture Mode, Sound Mode - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 41
. Notes • Air : "Air" antenna signal. • Cable : "Cable" antenna signal. • Air + Cable : "Air" and "Cable" antenna signals. If the CableCARD is inserted into the "CableCARD" slot on the rear panel, "Cable" and "Air + Cable" are not available. TV Channel Antenna : Air √ Auto Program √ Add - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 42
the ENTER button. Press the ▲ or ▼ button to select "STD", "HRC", or "IRC", press the ENTER button. Move Enter Return TV Auto Program Select the cable system. Digital Channel Analog Channel Start : SSTTDD : SHTRDC IRC Press the ▲ or ▼ button to select "Analog Channel", then press the ENTER - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 43
from the memory, you can always tune to that channel directly by using the number buttons on the remote control. Move Enter Return TV Auto Program Select the cable system. Digital Channel : STD √ Analog Channel : STD √ Start Move Enter Return Auto Program Auto Program in progress - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 44
channel, then repeat above. Press the EXIT button to exit. TV Channel Antenna : Air √ Auto Program √ Add / Delete √ Favorite Channels √ Name √ Fine Tune √ † More Move Enter Return TV Channel Antenna : Air √ Auto Program √ Add / Delete √ Favorite Channels - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 45
After the process of updating the channel information using CableCARD has been completed, only the number of channels the previous channel Press the PRE-CH button. The TV will switch to the last channel viewed. To quickly lower-left corner of the screen. 2 To turn mute off, press the MUTE button again, - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 46
7 - 1 KYW-HD HD For channel 7-2 (analog), press "7", then "-", then "2". DTV Cable 7 - 2 R SD Multi Notes • HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal. • For quick channel change, press the number buttons, then - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 47
Up Your Remote Control Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD, and Set-Top Box (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung). Note : ● The - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 48
Remote Control Codes VCR Codes Cable Box Codes DVD Codes 48 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 49
the remote control to switch between viewing signals from connected equipment, such as VCR, DVD, Set-Top Box, and the TV source (broadcast or cable). to the TV, you can choose between the following sets of jacks: AV, S-VIDEO, COMPONENT 1, COMPONENT 2, PC, or HDMI on the TV's rear panel. • HDMI - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 50
TV Input Source List : TV Cable STB, HD STB, Satellite STB, PVR STB, AV Receiver, DVD Receiver, GAME, Camcorder, DVD Combo, PC, VOD STB, or TV . • Set other signal sources (S-Video, Component 1, Component 2, PC, or HDMI) using the same method as listed above. Move Enter Return TV TV Edit - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 51
PLASMA DISPLAY PANEL Picture Control Changing the Picture Standard 52 Customizing the Picture Settings 53 Viewing the DNIe Demonstration 55 Changing the Screen Size 56 Viewing the Picture-in-Picture 58 Selecting the Sound Source 64 Setting the My Color Control Mode 65 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 52
ENTER button. TV Mode Size Picture : Dynamic √ : 16:9 √ Digital NR : On √ DNIe Demo : Off √ My Color Control √ Film Mode : Off √ † More Move Enter Return 2 Press the ENTER button again to select "Mode". TV Mode Mode Contrast Brightness Sharpness Color Tint G 50 Color Tone - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 53
or Tint) by pressing the ▲ or ▼ button. TV Picture Mode Size Digital NR DNIe Demo My Color Control Film Mode † More : Dynamic √ : 16:9 √ : On √ : Off √ √ : Off √ Move Enter Return TV Mode Mode Contrast Brightness Sharpness Color Tint G 50 Color Tone Reset : Dynamic √ 100 45 75 55 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 54
Color Tint G 50 Color Tone Reset : Custom √ 80 50 50 50 R 50 : Normal √ Move Enter Return TV Mode Mode Contrast Brightness Sharpness Color Tint G 50 Color Tone Reset : Custom 80 Cool2 50 Cool1 50 Normal50 Warm1R 50 : CWoaorl1m2 Move Enter Return Resetting the Picture Settings to the - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 55
remote control. 2 Press the ▲ or ▼ button to select "DNIe Demo", then press the ENTER button. 3 Press the ▲ or ▼ button to select "Off" or "On", then press the ENTER button. • Off : Switches off the DNIe Demo mode. • On : Switches on the DNIe Demo mode. 4 Press the MENU button to exit. TV Picture - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 56
under the cover of the remote control. 2 Press the ▲ or ▼ button to select "Size", then press the ENTER button. 3 Press the œ or √ button to select the screen size you want, then press the ENTER button. TV Picture Mode Size Digital NR DNIe Demo My Color Control Film Mode † More : Dynamic √ : 16 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 57
When you press the P.SIZE button under the cover of the remote control, the TV's screen mode should appear in sequence. The screen displays in this order: 16:9, Panorama, Zoom1, Zoom2, 4:3. Note • If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image may be - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 58
Picture-in-Picture Selecting the PIP Screen 1 Press the MENU button. Press the ▲ or ▼ button to select "Picture", then press the ENTER button. TV Mode Size Picture : Dynamic √ : 16:9 √ ➤ Quick way to access the PIP mode: Simply press the "PIP" button under the cover of the remote control - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 59
as a VCR. 1 Press the MENU button. Press the ▲ or ▼ button to select "Picture", then press the ENTER button. TV Mode Size Picture : Dynamic √ : 16:9 √ Digital NR : On √ DNIe Demo : Off √ My Color Control √ Film Mode : Off √ † More Move Enter Return 2 Press the ▲ or ▼ button - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 60
in the PIP window will appear on the main screen, and vice versa. (Refer to page 58) Note • If main picture is in PC mode, Swap is not available. 4 Press the MENU button to exit. TV Picture Mode Size Digital NR DNIe Demo My Color Control Film Mode † More : Dynamic √ : 16:9 √ : On √ : Off - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 61
ENTER button. 5 Press the MENU button to exit. TV Picture Mode Size Digital NR DNIe Demo My Color Control Film Mode † More : Dynamic √ : 16:9 √ : On √ : Off √ √ : Off √ Move Enter Return TV PIP PIP : On √ Source : TV √ Swap Size : √ Position : √ PIP Channel : DTV Air - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 62
ENTER button. 5 Press the MENU button to exit. TV Picture Mode Size Digital NR DNIe Demo My Color Control Film Mode † More : Dynamic √ : 16:9 √ : On √ : Off √ √ : Off √ Move Enter Return TV PIP PIP : On √ Source : TV √ Swap Size : √ Position : √ PIP Channel : DTV Air - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 63
button. Press the ▲ or ▼ button to select "Picture", then press the ENTER button. TV Mode Size Picture : Dynamic √ : 16:9 √ Digital NR : On √ ➤ Quick way to change the PIP channel: Just press the "CH " or "CH " button under the cover of the remote control. DNIe Demo : Off √ My Color - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 64
to hear sound from the main or sub (PIP) picture. 1 Press the MENU button. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. 2 Press the ▲ or ▼ button to select "Sound Select", then press the ENTER button. TV Sound Mode : Custom √ Equalizer √ SRS TruSurround XT : Off - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 65
menu. √ √ Pink Move Easy Control White Standard Enter Custom √ Return Original Red Red Move Easy Control Green Blue Enter Yellow √ Return Note • Pressing the ENTER button on the remote control for 3 seconds when there is no OSD on the screen will display the My Color Control menu. 65 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 66
Characteristics Using My Color Control mode, you can enjoy vivid colors as shown below. Standard Red Green ➤ Standard Picture. Blue ➤ Emphasizes Reds. Yellow ➤ Emphasizes Mild Greens. Pink ➤ Emphasizes Clear Blues. White ➤ Emphasizes Yellows. ➤ Emphasizes Warm Skin Colors. ➤ Emphasizes - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 67
the picture after adjustment is shown on the right side, and an adjustment bar on the bottom of the screen. 5 Press the œ or √ button to adjust the settings. • Press the ▲ or ▼ button to select other colors. Move Enter Return TV Red Green Blue Yellow Pink White Reset Detail Control 50 50 50 50 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 68
Colors will be reset to the factory defaults. Move Enter Return TV Red Green Blue Yellow Pink White Reset Detail Control 50 50 50 50 60 50 Move Enter Return TV Red Green Blue Yellow Pink White Reset Detail Control 50 50 50 50 60 50 Move Enter Return 6 Press the MENU button to exit the - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 69
PLASMA DISPLAY PANEL Sound Control Customizing the Sound 70 Using Automatic Sound Settings 71 Setting the TruSurround XT 72 Choosing a Multi-Channel Sound (MTS) track - Digital 73 Choosing a Multi-Channel - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 70
automatic" settings. See next page.) 1 Press the MENU button. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. TV Mode Equalizer Sound : Custom √ √ SRS TruSurround XT : Off √ Multi-Track Options √ Auto Volume : Off √ Internal Mute : Off √ † More Move Enter - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 71
press the ENTER button. ➤ Quick way to access the picture setting: Just press the "S.MODE" button on the remote control. 2 Press the ENTER button to select "Mode". 3 √ Internal Mute : Off √ † More Move Enter Return TV Sound Mode Equalizer SRS TruSurround XT Multi-Track Options Auto Volume - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 72
problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television : OSftfereo : Off Move Enter Return TV Sound Mode Equalizer SRS TruSurround XT Multi-Track - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 73
way to access the MTS menu: Just press the "MTS" button on the remote control. You can listen in a language other than the favorite language by pressing the MTS you want, then press the ENTER button. Enter Return TV Multi-Track Options Preferred Language : EEnngglilsishh Multi-Track Sound - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 74
the MTS menu: Just press the "MTS" button on the remote control repeatedly to select one of the settings. 2 Press the ▲ or ▼ button to setting you want, then press the ENTER button. Move Enter Return TV Multi-Track Options Preferred Language Multi-Track Sound : English : SMteorenoo - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 75
Sound Mode Equalizer SRS TruSurround XT Multi-Track Options Auto Volume Internal Mute † More : Custom : Off : OOfff : OOnn Move Enter Return TV Sound Mode Equalizer SRS TruSurround XT Multi-Track Options Auto Volume Internal Mute † More : Custom : Off : OOfff : OOnn Move Enter Return 75 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 76
Format Digital sound can be output from the rear panel connector on your TV. The digital sound outputs are connectors labeled " or ▼ button to select "Dolby Digital" or "PCM", then press the ENTER button. TV Sound Mode : Custom √ Equalizer √ SRS TruSurround XT : Off √ Multi-Track Options - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 77
Setting the On/Off Melody A melody sound can be set to come on when the TV is powered On or Off. 1 Press the MENU button. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. 2 Press the ▲ or ▼ button to select " - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 78
Sound Mode Equalizer SRS TruSurround XT Multi-Track Options Auto Volume Internal Mute † More : Custom : Off : Off : OOnff On Move Enter Return TV Sound Mode Equalizer SRS TruSurround XT Multi-Track Options Auto Volume Internal Mute † More : Custom : Off : Off : OOnff On Move Enter Return - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 79
PLASMA DISPLAY PANEL Channel Control Selecting the Antenna 80 Selecting Your Favorite Channels 81 Labeling the Channels 82 Viewing the Channel Lists 83 Editing the Channel Lists 84 Fine Tuning Analog Channels 85 Checking the Digital-Signal Strength 86 LNA (Low Noise Amplifier 87 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 80
2 Press the ENTER button to select "Antenna". Press the ▲ or ▼ button to select "Air" or "Cable", then press the ENTER button. TV Channel Antenna Auto Program Add / Delete Favorite Channels Name Fine Tune † More : AAirir Cable Move Enter Return Notes • If the antenna is connected to ANT 1 IN - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 81
Your Favorite Channels You can store your favorite channels for each available input source (such as TV and Cable box). Then, when you press the FAV.CH button on the remote control, the TV displays only the favorite channels you previously stored, allowing you to quickly and easily find frequently - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 82
to "Clear" by using the œ/√ button and press the ENTER. TV Channel Antenna : Air √ Auto Program √ Add / Delete √ Favorite Channels √ Name • When you use CableCARD to watch cable broadcasting, it might take some time for a channel name to be displayed due to data-receiving time. - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 83
button : Press to exit. All 2-1 4 6 8 10 12 13-1 TV #1 13-2 TV #1 Move Move Enter Channel List Return 13-3 TV #3 13-4 TV #4 17 19 23 28 32-10 44 62 69-98 NCAM-H.. Favorite Exit Watch Return Alternate method : Press the CH LIST button on the remote control to display a list of channels. 83 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 84
list page. Green button : Press to display the next channel Yellow button : Press to toggle between your favorite channels or all channels. Blue or EXIT button : Press to exit. Edit 2-1 4 6 8 10 12 13-1 TV #1 13-2 TV #1 Move Edit 2-1 4 6 8 10 12 13-1 TV #1 13-2 TV #1 Move Move Enter Channel List - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 85
Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. TV Antenna Channel : Air √ Auto Program √ Add / Delete √ Favorite Channels √ Name - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 86
which can vary in reception quality from "snowy" to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them the antenna until you find the best position with the strongest signal. TV Channel Antenna : Air √ Auto Program √ Add / Delete √ Favorite - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 87
to select "On" or "Off", then press the ENTER button. Move Enter Return TV Channel ... More Channel List Signal Strength LNA : OOfff On 4 Press the MENU See "Selecting the Antenna" on page 80.) • If the picture is noisy with the LNA set to On, select Off. • The LNA setting must - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 88
- Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 89
PLASMA DISPLAY PANEL Connecting a PC and Operation Connecting a PC 90 Changing the Position of the Image 94 Picture Quality Adjustment 95 Image Reset 98 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 90
sure to match the color coded input terminals and cable jacks. • A PC will not operate when connected with a HDMI/DVI cable. To watch the PC screen: 1. Turn on your TV. 2. Press the SOURCE button on the remote control or SOURCE button on the front panel to select "PC". 3. Turn on your PC and check - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 91
Setting up Your TV (Plug and Play) Our adoption of the new VESA Plug and Play . Your PC system can easily identify and configure itself for use with your TV. This TV automatically tells the PC system its Extended Display Identification data (EDID) using Display Data Channel (DDC) protocols. 91 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 92
. (See page 90) • The actual screens on your PC may look different, depending on your particular version of Windows and the type of your PC. • When you use your TV as a PC monitor, it supports Colors up to 32 bits. • In this case, the display on the TV may look 4 different depending on your - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 93
in XGA mode (1024 x 768@60Hz). • The PC text quality of HP-R5052 is optimum in WXGA mode (1360 x 768@60Hz). • When this TV is used as a PC display, 32-bit color is supported. • Depending on the manufacturer, your PC display screen might appear different. (and depending on your particular version of - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 94
√ Auto Adjustment Image Reset 3 Press the ▲ or ▼ button to select "Position", then press the ENTER button. TV Move Enter Position Return 4 Adjust the position of screen by pressing the button. Move Enter Return TV Position 5 Press the MENU button to exit. Move Enter Return 94 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 95
the ▲ or ▼ button to select "PC", then press the ENTER button. TV PC Image Lock √ Position √ Auto Adjustment Image Reset 3 Press the ▲ Adjustment in progress. Please wait." appears on the screen and the picture adjustments are automatically activated. Move Enter Return Auto Adjustment - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 96
Image Reset 3 Press the ENTER button to select "Image Lock". Move Enter Return TV Coarse Fine Image Lock 50 0 4 Press the ENTER button again to select "Coarse". Remove picture noise (vertical stripes) on the screen by pressing the œ or √ button. (If Coarse is not set properly, vertical - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 97
3 Press the ENTER button to select "Image Lock". Move Enter Return TV Coarse Fine Image Lock 50 0 Move Enter Return 4 Press the ▲ or ▼ button to select "Fine", then press the ENTER button. Fine 0 Remove picture noise on the screen by pressing the œ or √ button. (If Fine is not set - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 98
Press the ▲ or ▼ button to select "PC", then press the ENTER button. TV PC Image Lock √ Position √ Auto Adjustment Image Reset 3 Press the ▲ or ▼ ENTER button. The message "Image Reset is completed." appears on the screen. • The previously adjusted settings will be reset to the factory defaults. - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 99
PLASMA DISPLAY PANEL Time Setting Setting the Clock 100 Setting the On/Off Timer 102 Setting the Sleep Timer 103 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 100
in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually 1 Press the MENU button. Press the ▲ or , Hour and Minute directly by pressing the number buttons on the remote control. 100 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 101
button to exit. Note • Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually. TV Setup Plug & Play Language Time V-Chip Caption Menu Transparency † More √ : English √ √ √ √ : Medium √ Move Enter Return - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 102
hour, minute, channel and volume directly by pressing the number buttons on the remote control. 3 Press the ▲ or ▼ button to select "Off Timer", then press Auto Power Off When you set the timer "On", the television will eventually turn off, if no controls are operated for 3 hours after the TV was - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 103
(from 30 to 180 minutes). 1 Press the MENU button. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. TV Plug & Play Language Setup √ : English √ Time √ V-Chip √ Caption √ Menu Transparency : Medium √ † More Move Enter Return 2 Press the ▲ or ▼ button to select - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 104
- Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 105
PLASMA DISPLAY PANEL Function Description Selecting a Menu Language 106 Digital Noise Reduction 107 Selecting the Film Mode 108 Setting the Blue Screen 109 Using the Color Weakness Enhancement Option 110 Viewing Closed Captions (On-Screen Text Messages) - Analog...111 Viewing Closed Captions ( - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 106
Selecting a Menu Language 1 Press the MENU button. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. TV Plug & Play Language Setup √ : English √ Time √ V-Chip √ Caption √ Menu Transparency : Medium √ † More Move Enter Return 2 Press the ENTER button to select " - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 107
the screen. 1 Press the MENU button. Press the ▲ or ▼ button to select "Picture", then press the ENTER button. TV Mode Size Picture : select "On" or "Off", then press the ENTER button. TV Picture Mode Size Digital NR DNIe Demo My Color Control Film Mode † More : Dynamic : 16:9 : OOnff : - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 108
Picture", then press the ENTER button. TV Mode Size Picture : Dynamic √ : 16:9 √ Digital NR : On √ DNIe Demo : Off √ My Color Control button. TV Picture Mode Size Digital NR DNIe Demo My Color Control Film button. TV Picture Mode Size Digital NR DNIe Demo My Color Control Film Mode - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 109
2 Press the ▲ or ▼ button to select "Blue Screen", then press the ENTER button. TV Picture ... More Blue Screen : OOfff Color Weakness : OOfnf PIP 3 Press the ▲ or ▼ button to select "On" or "Off", then press the ENTER button. ➤ Blue Screen is displayed when there is no signal from an - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 110
weakness. 1 Press the MENU button. Press the ▲ or ▼ button to select "Picture", then press the ENTER button. TV Mode Size Picture : Dynamic √ : 16:9 √ Digital NR : On √ DNIe Demo : Off √ My Color Control √ Film Mode : Off √ † More Move Enter Return 2 Press the ▲ or ▼ button - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 111
On-Screen Caption: Simply press the "CAPTION" button under the cover of the remote control. 2 Press the ▲ or ▼ button to select "Caption", then Services. These data channels should be used only if Text1 and Text2 data bandwidths are not sufficient. 5 Press the MENU button to exit. Enter Return TV - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 112
Screen Text Messages) - Digital The Digital Captions function operates on digital channels. 1 Press the MENU button. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2 Press the ▲ or ▼ button to select "Caption", then press the ENTER button. TV Enter Return TV Caption - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 113
Flashing". You can change the background opacity of the caption. • Return to Default This option sets each of "Size", "Font Style", "Foreground Color", "Background color", "Foreground Opacity", and "Background Opacity" to its default. Alternate method: Press the CAPTION button on the remote control - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 114
Menu Transparency Level Adjusts the transparency of the menu screen. 1 Press the MENU button. Press the ▲ or ▼ select level, then press the ENTER button. 3 Press the MENU button to exit. TV Setup Plug & Play Language Time V-Chip Caption Menu Transparency † More √ : English √ √ - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 115
√ button under the cover of the remote control. V-Chip √ Caption √ Menu Transparency : Medium √ † More Move Enter Return 2 Press the ▲ or ▼ button to select "Energy Saving", then press the ENTER button. TV Setup ... More Energy Saving Screen Burn Protection PC Function Help CableCARDTM - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 116
screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line direction to prevent after image on the screen. Move Enter Return TV Pixel Shift Pixel Shift Horizontal Dot Vertical Line Time : OOnff : 2On : 2 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 117
function when there are remaining after-images or symbols on the screen especially when you displayed a still image on the screen for a long time. 4 Press the MENU button to exit. Move Enter Return TV Screen Burn Protection Pixel Shift √ All White √ Signal Pattern √ Move Enter Return - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 118
Burn Protection PC Function Help CableCARDTM CableCARDTM Setup : Standard : OOfff On Move Enter Return TV Setup ... More Energy Saving Screen Burn Protection PC Function Help CableCARDTM CableCARDTM Setup : Standard : OOfff On Move Enter Return Switches the Function Help on. 4 Press - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 119
the ENTER button. TV Plug & Play screen disappears, your PIN has been memorized. 0~9 Enter PIN Return 5 Press the MENU button to exit. Note • If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : Power Off. ➔ Mute ➔ 8 ➔ 2 ➔ 4 ➔ Power - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 120
Press the ▲ or ▼ button to select "Setup", then press the ENTER button. TV Plug & Play Language Setup √ : English √ Time √ V-Chip √ Caption √ Return 3 The "V-Chip" screen will appear. To enable the V-Chip feature, press the ENTER button so that the "V-Chip Lock" TV V-Chip Lock V-Chip : - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 121
Parental Guidelines Allow All Block All 4 The "TV Parental Guidelines" screen will appear. Press the ▲ or ▼ button to select one of the six ages based categories: TV-Y TV-Y7 Young children Children 7 and over TV-G TV-PG TV-14 TV-MA General audience Parental guidance Viewers 14 and over Mature - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 122
MENU button to clear all the screens. (Or proceed to the next section, and set up additional restrictions based on the MPAA codes.) Note • These categories consist of two separate groups: TV-Y and TV-Y7 (young children through age 7), and TV-G through TV-MA (everybody else). The restrictions for - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 123
Picture Association of America (MPAA) system, and its main application is for movies. When the V-Chip lock is on, the TV ENTER button. 0~9 Enter PIN Return TV 4 The "MPAA Rating" screen will appear. Repeatedly press the ▲ A selected symbol " " will be displayed. Press the ENTER button to block or - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 124
after the V-Chip Blocks a Channel ("Emergency Escape") If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: 1 Enter your PIN number. Channel Is Locked by TV-PG[ S ] Use the NUMBER buttons to enter your pin number to - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 125
Electronic Program Guide Your TV has an "Electronic Program Guide" to help you remote control. H Displays the program times (arranged in 1 hour time blocks). I Displays the current time and date. Note • You can use the GUIDE button on the remote control to display the Electronic Program Guide - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 126
to select "Mini Guide" or "Full Guide", then press the ENTER button. • Mini Guide : Displays the guide for one channel. • Full Guide : Displays the guide for all channels. Move Enter Return TV Guide Mini Guide Full Guide Reminder List Default Guide : MMininiiGGuuididee Full Guide 4 Press the - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 127
Fri May 31 Watch INFO Prog Info Full Guide Exit Notes • You can also view information about a single channel by pressing the GUIDE button on the remote control. (The EPG should be pre-set in Mini Guide mode.) • Press the INFO button on the remote control to view the program information for the - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 128
or the EXIT button. Notes • The current time displayed on the program information is subject to the time information sent from the broadcasting station, so it may differ from the actual time. • Press the GUIDE button on the remote control to view the program information for all channels. However - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 129
press the ENTER button. TV Guide Mini Guide Full Guide Reminder List Default Guide √ √ √ : Mini Guide √ 2 Press the ENTER button to select "Full Guide". Press the ▲ or ▼ button to select programs you would like to see, then press the enter button. The symbol "✔" will be displayed. Each press of - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 130
To view the Reminder List 1 Press the MENU button. Press the ▲ or ▼ button to select "Guide", then press the ENTER button. TV Guide Mini Guide Full Guide Reminder List Default Guide √ √ √ : Mini Guide √ 2 Press the ▲ or ▼ button to select "Reminder List", then press the ENTER button. Move - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 131
works with a CableCARD provided by a local cable service provider. Prior to accessing this menu, a CableCARD should be connected to the rear panel of the TV. For detailed connection instructions refer to the "Connecting CableCARD" section of this manual. Displaying CableCARD related information - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 132
options for CableCARD. CableCARD Reset Resets CableCARD when the channels provided by CableCARD are not TV Setup Plug & Play Language Time V-Chip Caption Menu Transparency † More √ : English √ √ √ √ : Medium √ Move Enter Return TV Setup ... More Energy Saving : Standard √ Screen - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 133
or upgrade your CableCARD service. 1 Press the MENU button. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. TV Plug & Play CableCARDTM Setup", then press the ENTER button. TV Setup ... More Energy Saving : Standard √ Screen Burn Protection √ PC √ Function Help - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 134
- Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 135
PLASMA DISPLAY PANEL Appendix Troubleshooting 136 Care and Maintenance 137 Specifications 138 Dimensions (HP-R4252 139 Dimensions (HP-R5052 141 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 136
this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest service center. Problem Poor picture. No picture or sound. Poor sound quality. Your remote control does not operate the TV. The TV won't turn on. There is no screen image. The image is - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 137
open the cabinet or touch the parts inside. • Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals. • Do not put heavy objects on top of the cabinet. Temperature • If your TV is suddenly moved from a cold to a warm place, unplug the power cord for at least two - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 138
of this product. Model Dimensions Display Weight Display Voltage Power Consumption Number of Pixels Screen Size ANTENNA input VIDEO input AUDIO input Sound Output Audio Output Speaker Output HP-R4252 HP-R5052 41.7 (W) x 29.1 (H) x 3.88 (D) inches (Without Stand) 48.43 (W) x 32.52 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 139
Dimensions (HP-R4252) JACK PANEL DETAIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM 139 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 140
140 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 141
Dimensions (HP-R5052) JACK PANEL DETAIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM 141 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 142
142 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 143
Memo 143 - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 144
Memo - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 145
Memo - Samsung HP-R4252 | Quick Guide (easy Manual) (ver.1.0) (English) - Page 146
1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America Service Division 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 www.samsung.com Samsung Electronics Canada Inc. Samsung Customer Care 7037 Financial Drive Mississauga, Ontario L5N 6R3 www.samsung.ca BN68-00835A-00
Owner’s Instructions
HP-R4252
HP-R5052
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register