Samsung LH46MGPLBC/ZA User Manual (ENGLISH)
Samsung LH46MGPLBC/ZA Manual
 |
View all Samsung LH46MGPLBC/ZA manuals
Add to My Manuals
Save this manual to your list of manuals |
Samsung LH46MGPLBC/ZA manual content summary:
- Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 1
SyncMaster 400MX,460MX,400MXn,460MXn LCD Monitor User Manual - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 2
it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Shortcut to Anti-Afterimage Instructions Do not use a damaged power cord or plug or a damaged or loose power outlet. • Otherwise, this may result in electric shock or fire. Do not - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 3
Safety Instructions Do not forcefully bend or pull the power plug and do not place • Otherwise, this may result in fire or electric shock. Installation Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures, high humidity - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 4
Clean Safety Instructions Do not install it in a badly ventilated location such as a bookcase or closet. • Otherwise, this may result in fire due to an increase in the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 5
Others Safety Instructions When cleaning the product, make sure to disconnect the power cord the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center. • Otherwise, this may result in electric shock or fire. If thunder or lightening is occurring, - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 6
Safety Instructions Do not try to move the monitor by pulling only the wire or the product. • If water or a foreign material enters the product, disconnect the power cord and contact a Service Center. • This may result in a product malfunction, electric shock, or fire. Do not use or keep combustible - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 7
Safety Instructions Take a rest for at least five (5) minutes after using the monitor or death. Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach. • If children have had - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 8
Safety Instructions Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater. • This may reduce the lifetime - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 9
any items are missing, contact your dealer. Contact a local dealer to buy optional items. Note This stand is not for the Floor Standing Type. Unpacking Manuals LCD Display Quick Setup Guide Cables Warranty Card (Not available in all locations) User - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 10
Others Remote Control Sold separately Introduction Batteries (AAA X 2) (Not available in all loca- tions) HDD Cover DVI Cable Wall box or TV tuner box. For information on how to use these, refer to their respective user manuals. • You can only connect one external box. Your LCD Display Front - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 11
Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods. Remote Control Sensor Aim the remote control towards this spot on the LCD - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 12
On/Off. POWER IN The power cord plugs into the LCD Display and the wall plug. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port DVI / PC / HDMI IN [DVI/PC/HDMI AUDIO IN] (PC/DVI/HDMI Audio Connection Terminal (Input)) DVI / PC / HDMI IN [HDMI] Connect the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 13
Introduction DC OUT [5V/1.5A] Connect this to the POWER connector of a TV tuner box or network box. AV IN [VIDEO] (VIDEO Connection Terminal) Connect the [ VIDEO ] terminal of your monitor to the video output terminal of the external device using a VIDEO cable. AV AUDIO IN [L-AUDIO-R](LCD Display - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 14
differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking device Cables for further information regarding cable connections. Remote Control Note The performance of the remote control may be affected by a TV or other - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 15
Number Buttons DEL button + VOL - MUTE TV/DTV MENU INFO COLOR BUTTONS TTX/MIX STILL AUTO S.MODE MDC LOCK SOURCE ENTER/PRE-CH CH/P D.MENU GUIDE RETURN Up-Down Left-Right buttons EXIT SRS MagicInfo P.MODE DUAL/MTS PIP SWAP Turns the product On. Turns the product Off. Press to change - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 16
19. ENTER/PRE-CH 20. CH/P 21.D.MENU 22.GUIDE 23. RETURN Introduction The "-" button operates only for DTV List" menu. TV channels provide written information services via teletext. - Teletext Buttons For more deactivates all function keys on both the remote control and the LCD Display except for the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 17
the broadcasting type by using the DUAL button on the remote control while watching TV. MTS- You can select MTS ( Multichannel Television Stereo) mode. FM Stereo Audio Type Mono Stereo SAP MTS/S_Mode Mono Mono ↔ Stereo Mono ↔ SAP Default Manual - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 18
Introduction LCD Display Head - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 19
VESA, make sure to comply with the international VESA standards. • Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG Distributor to place an order. After your order is placed, installation professionals will visit you and install the bracket. • At least - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 20
a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • This - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 21
Introduction When done, mount the wall bracket on the wall. There are two hinges(left and right). Use the correct one. A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2. Before drilling into the wall, check if the length between the two locking holes at the back of - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 22
Introduction To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. Notice • Mount the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 23
Introduction 4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A - LCD Display - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 24
Introduction Make sure to use the top center, and not the leftor the right side of the product to adjust the angle. Mechanical Layout (460MX, 460MXn) Mechanical Layout LCD Display Head - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 25
VESA, make sure to comply with the international VESA standards. • Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG Distributor to place an order. After your order is placed, installation professionals will visit you and install the bracket. • At least - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 26
a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • This - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 27
Introduction There are two hinges(left and right). Use the correct one. A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2. Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 28
Introduction To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. Notice • Mount the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 29
Introduction 4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A - LCD Display - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 30
Introduction Make sure to use the top center, and not the leftor the right side of the product to adjust the angle. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 31
Connections Connecting a Computer Using a Power cord with Earth • In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When unwiring the earth lead, make sure to disconnect the AC power in advance. Note AV - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 32
on the back of your computer. Note • Turn on both your computer and the LCD Display. • The DVI cable is optional. • Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices Using a Power cord with Earth • In the event of failure, the earth lead may cause - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 33
on the LCD Display . 3. Select AV for the Camcorder connection using the Source button on the front of the LCD Display or on the remote control. 4. Then, start the Camcorders with a tape inserted. Note The audio-video cables shown here are usually included with a Camcorder. (If not, check your local - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 34
Connections Connecting Using a DVI to HDMI Cable Note • Connect the DVI output terminal of a digital output device to the HDMI terminal of the LCD Display using a DVI to HDMI cable. • Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 35
Connections Note Connect the LAN cable. (Applicable to the MXn model only) Connecting a USB device Using a Power cord with Earth • In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When unwiring the earth - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 36
you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web site : http://www.samsung.com/ (Worldwide) Installing the Monitor Driver (Automatic) 1. Insert CD into the CD-ROM drive. 2. Click "Windows". 3. Choose your monitor model in the model - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 37
. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft® Windows Vista™, Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click (Start) and "Control Panel". Then, double-click on "Appearance and - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 38
Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. 6. Click "Update Driver..." in the "Driver" tab. 7. Check the "Browse my computer for driver software" checkbox and click "Let me - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 39
Using the Software 9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence. Microsoft® Windows® XP Operating System - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 40
Using the Software 1. Insert CD into the CD-ROM drive. 2. Click "Start" → "Control Panel" then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...". 4. Click the "Properties" button on the " - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 41
"OK" button. Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button then click "OK" button continually. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 42
Needed" window. 3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button. How to install 1. Click "Start", "Setting", "Control Panel". 2. Double click the "Display" icon. 3. Select the "Settings" tab and click "Advanced Properties" button. 4. Choose "Monitor". Case1 : If the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 43
Windows® NT Operating System 1. Click "Start", "Settings", "Control Panel", and then double-click "Display" icon. 2. In Display resolution and vertical frequency by referring to the Preset Timing Modes in the user guide. Linux Operating System To execute X-Window, you need to make the X86Config file - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 44
Using the Software Installation MagicInfo Pro Installation 1. Insert CD into the CD-ROM drive. 2. Click the MagicInfo Pro installation file. 3. When the Install Shield Wizard window appears, click "Next." 4. Select "I agree to the terms of the license agreement" to accept the terms of use. 5. You - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 45
Using the Software 6. Choose a folder to install the MagicInfo Pro program. 7. Click "Install." - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 46
Using the Software 8. The "Installation Status" window appears. 9. It is recommended restarting the system for the normal operation of the MagicInfo Pro Server program. Click "Finish". - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 47
program. System Requirements CPU Minimum P1.8 Recommen- P3.0GHz ded RAM 256M 512M Ethernet 100M/1G OS Application Windows XP WMP 9 or Windows later 2000 (Service Pack 4) - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 48
Introduction A Multiple Display Control (MDC) is an application allowing various displays to be easily and on a PC and the serial port on a display. Main Screen Click Start > Program > Samsung > MDC System to start the program. Select a set to see the volume of the selected set within the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 49
function of the display unit. 3. Set the Safety Lock function. When setting the Lock function, you can only operate power and lock buttons on the remote control and set. 4. The setting for the PC Serial Port can change. The original value is COM1. 5. Click Select all or Clear to select or clear - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 50
1. The Multiple Display Control is originally set to COM1. 2. If any port other than COM1 is used, COM1 through COM4 can be selected unavailable. 4. The selected port is stored in the program and used for the next program as well. Power Control 1. Click Power Control of the main icons and the Power - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 51
Info Grid shows some basic information necessary to Power Control. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Use the Select All button or Check Box to choose a display to control. Power Control allows controlling some of the functions of the selected display. 1) Power On/ - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 52
level. (The values return to the default settings when you undo the selections or choose "Select All".) The Power Control feature is available for all displays. The Volume Control and Mute features are available only for the displays whose power status is ON. Input Source 1. Click Input Source of - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 53
Info Grid shows some basic information necessary to Input Source Control. 1) PC - Changes the Input Source of the can be selected only in products with TV and controlling channels is allowed only when Input Source is TV. The Input Source Control feature is available only for the displays whose power - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 54
respective Input Source. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. Image Size Control is available only for the displays for which power status is ON. Image Size TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV 1. Click Image Size - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 55
tab to adjust Image Size for TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV. Click Select All or use Check Box to select a display to control. 2) Info Grid displays only the display having TV, AV, S-Video, Component or DVI(HDCP) as input source. 3) Switch Image Size of the selected display - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 56
the Off Time settings. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. Time Control is available only for the displays for which the power status is ON. At On Time Setup, TV Source functions only for TV Model. At - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 57
Info Grid shows some basic information necessary to PIP Size Control. 1) PIP Size - Shows the current PIP Size of the display in use. 2) OFF source of TV works only on TV model. PIP Size can be controlled with turning on the LCD Display power. PIP PIP Source 1. Click PIP of the main icons and the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 58
available for selection, depending on the input source type of the Main Screen. The Input source of MagicInfo works only on MagicInfo model. The PIP Control feature is available only for the displays whose power status is ON and the PIP function is set to ON. Settings Picture 1. Click Settings of - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 59
Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide.When selected, each function fetches the value for - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 60
screen appears. Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When selected, each function fetches the value for - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 61
All" is chosen, the default value is displayed. Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Audio - Controls audio settings for all input sources. 2) Bass - Adjusts Bass of the selected display. 3) Treble - Adjusts Treble of the selected display. 4) Balance - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 62
of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. Settings Control is available only for the displays for which the power status is ON. Maintenance Lamp Control 1. Click on the "Maintenance" icon in the Main Icon column to display the Maintenance screen. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 63
- Allows you to adjust the backlight of the selected display regardless of the time. The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control. The Maintenance Control feature is available only for the displays whose power status is ON. The Input source of MagicInfo - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 64
. Setting Second, you can set to 1, 2, 3, 4, 5 for Scroll Type and to 10, 20, 30, 40, 50 for Pixel, Bar, and Eraser Type. The Maintenance Control feature is available only for the displays whose power status is ON. Maintenance Video Wall 1. Click on the "Maintenance" icon in the Main Icon column - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 65
a number in the selected mode. z The MDC program supplied by Samsung supports up to 5x5 LCD Displayes. 3) On / Off - Turns on/ Control function is available only for the displays where the power status is ON. Troubleshooting 1. The display you wish to control does not appear on the Power Control - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 66
The dialogue box appears repeatedly. - Check to see if the display you wish to control is selected. 4. Both On Timer and Off Timer have been set but different time is turn the remote function again to Restore normal functions. This program may malfunction due to problems in communication - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 67
What is MagicInfo Pro? | Using MagicInfo Pro | Remote Management | Message | What is MagicInfo Pro? Library Option | Screen | | Client / Contents | Server Schedule Troubleshooting MagicInfo Pro uses an Ethernet network for servers and monitors, and transfers media files (image files, - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 68
, view the status of, and diagnose monitors. 7. VNC → The VNC function allows you to connect to a monitor remotely and view the status of and control and diagnose it. 8. Update and PXE → The Update function allows you to easily update the programs on the monitor. The PXE allows you to recover - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 69
What is MagicInfo Pro? | Using MagicInfo Pro | Remote Management | Message | Using MagicInfo Pro Library Option | Screen | | Client / Contents | Server Schedule Troubleshooting Running MagicInfo Pro 1. Click Programs -> MagicInfo Pro -> MagicInfo Pro. 2. When MagicInfo Pro runs, select - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 70
2. Configure the Network Connection settings In the General tab. Enter the server name on the monitor identical to the name of the server. To change the server name, double-click the Value field of the Server Name item. 3. If there is more than one network card in the server, select a network card - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 71
MagicInfo in the OSD pages.) 2. A message is displayed to notify that the monitor is successfully connected to the server. File Sub-Menus Registering a Library 1. Select Library from the File menu to open the Library View. 2. Select a photo file, music file, movie file, document, or Flash file etc. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 72
4. The registered library files are used by the monitor when the Operating Mode of the monitor is set to Player or is used when registering a screen. Registering a Screen 1. Select Screen from the File menu to open a Screen View. 2. Right-click on the background view. Click on the Area and click - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 73
5. Repeat steps 2 to 4 to register other areas on a screen. 6. After finishing registering areas, select Save from the File menu to save the screen. 7. Register a schedule to display the saved screen on a monitor(s). Registering a Schedule 1. Select Schedule from the File menu to open the Schedule - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 74
4. If you want to change the date or time of the schedule, drag it to a different date or time. 5. Select Publish from the Tools menu. Select the checkbox next to the monitors for which you want to register the selected schedule. Sending a Message 1. Select Message from the File menu to open the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 75
- Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 76
Screen | | Client / Contents | Server Schedule Troubleshooting File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can perform a screen schedule and have basic control over the monitors from the server - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 77
Tools Menu Synchronize z Synchronizes the library files of the main server with the files of the content server. Option z Changes the server settings. For more information, refer to the Options section. Library - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 78
Tree View List View Output View Tree View All the folders under My Computer on the Windows Desktop, library, screen, and content server are displayed in a tree view. If you select a folder, its subfolders and a list of files in it are displayed in the list view in the right pane. Exploring Normal - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 79
Displays the screen management folders created with the Screen menu in a tree view. Function: Displays the subfolders and screen files below the selected folder in the list window on the right by selecting a folder. Hot Key z F2 key: Renames the selected folder. z Delete key: Deletes the selected - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 80
z If you drag and drop a file from the list view into a library, it is registered to that library. However, the drag & drop function is not supported for folders. Context Menu z Open: If you click Open for a folder, you are moved to that folder. If you click Open for a file, the file - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 81
the library folder are the same. However, the drag & drop function is not supported for folders. Context Menu z Open: If you click Open for a folder, you folder is selected in the tree view. This menu item is not supported for library files. z Delete: Deletes the selected folders and library files - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 82
Ctrl + X keys: Cuts the selected library files to the clipboard so that you can paste them to other location. However, this hot key is not supported for folders. z Ctrl + V keys: Pastes the library files cut to the clipboard to the selected location. However, you cannot paste them when a library or - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 83
, they are moved to that folder. However, the drag & drop function is not supported for folders. Context Menu z Open: If you click Open for a folder, you z Rename: Renames the selected folder. However, this menu item is not supported for a screen file. z Delete: Deletes the selected screen files and - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 84
. z Ctrl + X keys: Cuts the selected screen files to the clipboard so that you can paste them to another location. However, this hot key is not supported for a folder. z Ctrl + V keys: Pastes the screen files cut to the clipboard to the selected location. Exploring the Content Server - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 85
to a content server folder in the tree view or the list view, they are moved to that folder. However, the drag & drop function is not supported for folders. Context Menu z Open: If you click Open for a folder, you are moved to that folder. However, this menu item is deactivated when a content - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 86
keys: Cuts the selected content servers to the clipboard so that you can paste them to another location. However, this hot key is not supported for folders. z Ctrl + V keys: Pastes the content servers cut to the clipboard to the selected location. Content Server Status z This icon is displayed when - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 87
Hot Key z Ctrl + C: Copies the selected message to the clipboard so that you can paste it to another location. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 88
| Screen | | Client / Contents | Server Schedule Troubleshooting File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can perform a screen schedule and performs basic control for the monitors from the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 89
accounts that can be created: Administrator and User Accounts { Administrator: Has privileges for all server functions. { User: Has privileges for all server functions except for changing server options and user account features. Exit z Exits the program. If there are any unsaved changes, a new - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 90
Screen Tree View Edit View List View Tree View A tree is created in accordance with the order of the areas created in the Edit View. You can check the area currently selected in the Edit View using the Tree View. If you select a property of an area, the detailed property information is displayed in - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 91
z New: Initializes the screen view you are currently working with. If there are any unsaved changes, a new window is displayed so that you can save them. z Open: Opens a screen file. If there are any unsaved changes, a new window is displayed so that you can save them. z Save / Save As: Saves the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 92
Name: Changes the background name. You cannot use a name already used for another area name. Resolution: Changes the resolution for the background. You can add a new resolution and set the default resolution using the Options menu. Start Time, Stop Time, Duration: Sets the playing time of the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 93
z Tile: The photo file is tiled continuously across the entire background. Time Interval: Sets the slide show time between photo files when the background type is set to Photo File. Office File: Selects the office files when the background type is set to Office File. You can create the background - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 94
Sound: Turns the background sound on or off. Music File: Selects a music file for the background. Volume: Controls the volume of the background music. Repeat: A music file can be played repeatedly. When set to Repeat, the music file is played repeatedly while the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 95
Photo This function is for configuring screens using photo files and consists of the Area, Screen, Background, Effect functions. The Area function allows you to set the position where the photo is displayed and when and for how long it is displayed. The Screen function allows you to select photo - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 96
Screen Photo File: Selects a photo file to play in the Photo area. Aspect Ratio: Selects the aspect ratio for the photo files to be played in the Photo area. z Full: The photo file is enlarged or reduced to fit the entire background. z Original: The photo file is displayed at the original size. z - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 97
. Sound: Turns the background sound for the Photo area on or off. Music File: Selects a music file for the background in the Photo area. Volume: Controls the volume for the background music in the Photo area. Repeat: A music file can be played repeatedly. When set to Repeat, the music file is - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 98
z Effect: Selects the type of effect to be applied when the Photo area is created. { None: No effect is used. { Slide: The Photo area is created while it is moving. { Block: The Photo area is created with blocks. { Fade In: The Photo Area fades in when it is created. z Effect Speed: Adjusts the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 99
entire background and keeps the original aspect ratio. Mute: Mutes the sound of the movie file to be played in the Movie area. Movie Volume: Controls the volume of the movie file to be played in the Movie area. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 100
. Sound: Turns the background sound for the Movie area on or off. Music File: Selects a music file for the background in the Movie area. Volume: Controls the volume of background music in the Movie area. Repeat: A music file can be played repeatedly. When set to Repeat, the music file is played - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 101
Changes the detailed properties and the transfer mode for the selected file of each type. z Transfer Mode: Changes the mode in which the selected file is transferred to the monitor. z Download: Downloads the file to the monitor and plays it. z Stream: Streams the file to the monitor. z Context Menu: - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 102
This function is for configuring screens using Macromedia flash files and consists of Area, Screen, Background, Effect functions. The Area function allows you to set the position where the movie is played and when and for how long it is played. The Screen function allows you to set the flash file - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 103
Screen Flash File: Selects the flash file to be played in the Flash area. Aspect Ratio: Selects the aspect ratio for the flash file to be played in the Flash area. z Full: The flash file is enlarged or reduced to fit the entire background. z Original: The flash file is displayed at the original size - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 104
. Sound: Turns the background sound for the Flash area on or off. Music File: Selects a music file for the background in the Flash area. Volume: Controls the volume of the background music in the Flash area. Repeat: A music file can be played repeatedly. When set to Repeat, the music file is - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 105
Web z Effect: Selects the type of effect to be applied when the Flash area is created. { None: No effect is used. { Slide: The Flash area is created while it is moving. { Block: The Flash area is created with blocks. { Fade In: The Flash area fades in when it is created. z Effect Speed: Adjusts the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 106
Name: Changes the area name. You cannot use a name already used for another area name. Lock Position: Locks the position of the area. Left, Top, Width, Height: Changes the position and size of the area. The area positions must be within the background and the area size cannot be larger than the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 107
. Sound: Turns the background sound for the Web area on or off. Music File: Selects a music file for the background in the Web area. Volume: Controls the volume of the background music in the Web area. Repeat: A music file can be played repeatedly. When set to Repeat, the music file is - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 108
Changes the detailed properties and the transfer mode for the selected file of each type. z Transfer Mode: Changes the mode in which the selected file is transferred to the monitor. z Download: Downloads the file to the monitor and plays it. z Stream: Streams the file to the monitor. z Context Menu: - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 109
This function is for configuring screens by connecting text and consists of the Area, Screen, Background, Effect functions. The Area function allows you to set the position of the text and when and for how long it is displayed. The Screen function allows you to select the text and how to display it. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 110
Text: Sets the text to be displayed in the Text area. Direction: Sets the direction of the text flow in the Text area. z None z Right to Left z Left to Right z Top to Bottom z Bottom to Top Text Speed: Sets the speed of the text flow in the Text area. Step: Sets the interval of the text flow in the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 111
. Sound: Turns the background sound for the Text area on or off. Music File: Selects a music file for the background in the Text area. Volume: Controls the volume of the background music in the text area. Repeat: A music file can be played repeatedly. When set to Repeat, the music file is - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 112
Source z Effect: Selects the type of effect to be applied when the Text area is created. { None: No effect is used. { Slide: The Text area is created while it is moving. { Block: The Text area is created with blocks. { Fade In: The Text area fades in when it is created. z Effect Speed: Adjusts the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 113
Name: Changes the area name. You cannot use a name already used for another area name. Lock Position: Locks the position of the area. Left, Top, Width, Height: Changes the position and size of the area. The area positions must be within the background and the area size cannot be larger than the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 114
Edit View This view is used for screen design and allows you to create, move and change the size of an area using your mouse. You can preview the current state by selecting Preview Area from the context menu or double-clicking on an area. Context Menu z Area: Selects the type of area you wish to - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 115
| Screen | | Client / Contents | Server Schedule Troubleshooting File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can perform a screen schedule and performs basic control for the monitors from the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 116
Tool Menu Undo / Redo z Cancels the previously performed command or performs the canceled command again. You can change the maximum number of commands that you can undo using the Option menu. Add z Adds the screen you wish to schedule after selecting a monitor and time by clicking in the EPG window. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 117
Schedule Tree View EPG View List View Publish View Tree View Displays the connection state of the monitors currently connected to the server depending on the monitor icon. You can also efficiently manage the monitors by creating network groups. You can move a networked monitor by dragging and - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 118
, the Power On function can be used. Remote Access: Allows you to remotely control a monitor connected to the server via VNC. The Remote Access function can degrade the performance of the server and the monitor. The Remote Access function does not support monitors on a private network. In addition - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 119
This is a virtual monitor used to create schedules for a monitor used without being connected to the network. Local publishing can be performed for a local monitor to create schedules for it. New Monitor: Creates a new virtual local monitor. Copy / Paste: Copies the schedules set on the selected - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 120
Add: Adds the screen you wish to schedule after selecting a monitor and time by clicking in the EPG window. Delete: Deletes the screen currently selected in the EPG window. Copy / Paste: Copies the currently selected screen and pastes it after selecting a monitor and time by clicking in the EPG - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 121
Name: Changes the name of the selected screen. Only the screen name changes and the time information is retained. Start Time / Stop Time / Duration: Sets the time information for the selected screen in minutes. Periodic: Sets how frequently the selected screen recurs. (None / Daily / Weekly / - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 122
Screen | | Client / Contents | Server Schedule Troubleshooting File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can perform a screen schedule and have basic control over the monitors from the server - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 123
Tools Menu Refresh z Refreshes the value of each client for the currently selected remote control item. Option z Changes the server settings. For more information, refer to the Options section. Remote Management Tree View List View Combo View - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 124
a tree view. If you select an item, the current state of the selected item is displayed and you can control it in the list view. MDC Displays the items for which remote management is required from among the OSD menus of each client monitor in a tree view. If you select an item - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 125
. 3) AM/PM: Enter AM or PM. 4) Status: Select whether to use the turn-on time. PIP: Displays the PIP information. You can control it in the list view. Sound: Displays the current sound state. You can control it in the list view. Signal Balance: Displays the current signal balance state. You can - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 126
the Tool menu and in the toolbar. MDC Displays the items for which remote management is required from among the OSD menus of each client monitor in input source is TV, can you display or control the setting. (Only applicable for monitors that support TV.) Picture Video: Displays the current state of - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 127
mode. (Only applicable for monitors that support TV.) Picture PC: Displays the current state of Balance, SRS TSXT, and Sound Select. You can control each item by clicking on it and changing the setting the lamp adjustment. (Maximum and minimum values) 2) Manual - Select a value to apply to the lamp - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 128
whether the lamp, internal temperature of the client, brightness sensor and fan are normal, and displays the current and maximum temperatures. You can control the maximum temperature by clicking on it and changing the setting. z An error is displayed if the maximum temperature is lower than the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 129
System Displays the items required to manage the system properties of the client in a tree view. You have to set the settings for each item by double-clicking the client or using the Edit item from the context menu, instead of selecting each item and setting a value as in MDC. Detailed Items System: - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 130
1) Current Status: Displays the current EWF status of the selected client. 2) EWF command: Changes the EWF status of the selected client. 3) Screen Rotation: Selects the screen direction of the selected client. 4) Screen Resolution: Displays the resolution of the selected client. 5) System message: - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 131
Context Menu Update: This item is only enabled if a monitor name is selected. This item compares the client version to the update version on the server and updates the client if required. Edit: Displays a window so that you can change the monitor settings. z For the System, General, and Performance - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 132
| Screen | | Client / Contents | Server Schedule Troubleshooting File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can run a screen schedule and perform basic control for the monitors from the server - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 133
user account features. Exit z Exits the program. If there are any unsaved changes, a new window is displayed so that you can save them. Tool Menu Undo / Redo z Cancels the previously performed command or performs the canceled command again. You can change the maximum number of commands that you can - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 134
Tree View List View Tree View You can select the monitors to which the message is sent by checking the checkbox next to each monitor and group. List View Changes the detailed functions for the message to be sent to the monitors by double-clicking it or by clicking the created button. Message: Sets a - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 135
What is MagicInfo Pro? | Using MagicInfo Pro | Remote Management | Message | Option Library Option | Screen | | Client / Contents | Server Schedule Troubleshooting Option General Network Connection: Selects the connection method between the server and the monitor. The server and - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 136
undos: Selects the maximum number of previous operations you can cancel. Refresh Time: Sets the frequency of the server receiving monitor data for updating in Remote Management. When set to 0, the server does not update the monitor data automatically and you have to click Refresh in the tool bar or - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 137
z Use the available disk space of each monitor: Sets the size to the maximum free disk space of the monitor. z Use the equal disk space of each monitor: Sets the size to the value entered in the edit box. z Do not check disk space when schedule is published: Publishing continues even though the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 138
What is MagicInfo Pro? | Using MagicInfo Pro | Remote Management | Message | Contents Server Library Option | Screen | | Client / Contents Server | Schedule Troubleshooting A program run on the additional PC where the content server is operating. Version: The version of the content - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 139
EWF Displays or changes the drive settings. Password Manages the password. Setup Rotation Rotates the screen with the selected option. Program Runs or exits the program. Exit Exits mnMain. If you exit mnMain, MagicInfo Pro and the Schedule program are also exited together. EWF: Displays and - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 140
automatically connects to the server. { When a connection is disconnected, the client connects to another server automatically. { The client connects to the server manually. (Enter the IP address of the server). Content server z Up to two (2) content servers can be configured. z Enter the IP address - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 141
, all the content files are downloaded or streamed from the specified content server and the schedule server performs only the schedules and the remote control function. z Preferred IP : Enter the IP address of the computer that operates as the primary content server. z Arternate IP : Enter the IP - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 142
. z You can select one of two programs, or select neither of them. z Player: Runs a media player program that can be run using the remote control and can receive and play the content that exists on the server. (MagicInfo Pro) z Runs the program that displays the information. This program displays - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 143
{ Background: Sets the background for the entire screen. { File: Sets the logo screen to be displayed on the background. (A flash, photo, or movie file can be set.) 2 Schedule folder z Sets the directory which the content to be scheduled is downloaded to and managed in and manages the size of the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 144
What is MagicInfo Pro? | Using MagicInfo Pro | Remote Management | Message | Troubleshooting Library Option | Screen | | Client / Contents | Server Schedule Troubleshooting When a monitor is not connected to the server z Check whether the network environment for the server and monitor - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 145
or an incomplete codec is installed on the PC, it may cause a problem. When an area edited on a screen cannot be previewed or the preview function click [Control Panel]. 2. For Windows XP, click [Start] and click [Control Panel]. 3. Double-click the [Add/Remove Programs] icon in the Control Panel. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 146
MagicInfo Pro 소개 | Screen Design | Message | Schedule | Remote Management | Option | 문제해결 | 일반사양 | MagicInfo Pro는 Windows MagicInfo Pro 1 2. Windows XP 3 4 MagicInfo Pro 5 6 MagicInfo Pro 7 Library RDP Update 1. 'ALT + F12 2 RDP ID와 PW ID: Administrator PW - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 147
connected to the LCD Display. Use to select the screen of your choice. 1. PC 2. DVI 3. AV 4. HDMI 5. MagicInfo 6. TV Note • The direct button on the remote control is the 'SOURCE' button. • For PC and DVI, this is deactivated if the cable is disconnected. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 148
Adjusting the LCD Display Edit Name MENU → ENTER → [Input] → → [Edit Name] → , → ENTER Name the input device connected to the input jacks to make your input source selection easier. 1. PC 2. DVI 3. AV 4. HDMI Picture [PC / DVI / MagicInfo Mode] Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 149
Each mode has its own pre-configured brightness value. You can easily select one of the four settings by simply pressing the MagicBright control button. (Not available in Dynamic Contrast mode of On.) 1. Entertain High brightness For watching motion pictures such as a DVD or VCD. 2. Internet Medium - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 150
Color Temp function is disabled. If you set the Color Tone to Off, the Color Control function is disabled Color Control Adjusts individual Red, Green, Blue color balance. MENU → → ENTER → [Picture ENTER → [Color Control] (Not available in Dynamic Contrast mode of On.) Note If you adjust the picture - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 151
LCD Display Red MENU → → ENTER → [Picture ENTER → [Color Control] → ENTER → [Red] → , → ENTER Green MENU → → ENTER → [Picture ENTER → [Color Control] → → ENTER → [Green] Blue → , → ENTER MENU → → ENTER → [Picture ENTER → [Color Control ENTER → [Blue] → , → ENTER Color Temp MENU → → ENTER - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 152
MENU → → ENTER → [Picture ENTER → [Auto Adjustment ] The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed. (Available in PC mode only) Note The direct button on the remote control is the 'AUTO' button. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 153
Picture ENTER → [Signal Balance] → ENTER → [Signal Balance] → , → ENTER Selects either On or Off with the signal control. Signal Control MENU → → ENTER → [Picture ENTER → [Signal Balance] → → ENTER → [Signal Control] 1. R-Gain MENU → → ENTER → [Picture ENTER → [Signal Balance] → → ENTER → [Signal - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 154
ENTER→ [G-Offset] → ENTER → , → ENTER 6. B-Offset MENU → → ENTER → [Picture ENTER → [Signal Balance] → → ENTER → [Signal Control ENTER[B-Offset] → ENTER Size → , → ENTER MENU → → ENTER → [Picture ENTER → [Size] → , → ENTER The Size can be switched. 1. 16:9 2. 4:3 Dynamic Contrast MENU - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 155
Adjusting the LCD Display → , → ENTER Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. 1. Off 2. On Picture [ AV / HDMI / TV Mode] Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV Note • The TV menu is available - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 156
Adjusting the LCD Display (Not available in Dynamic Contrast mode of On.) 1. Dynamic 2. Standard 3. Movie 4. Custom Note The direct button on the remote control is the 'P.MODE' button. Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. MENU → - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 157
Adjusting the LCD Display Tint → , → ENTER Adjusts the picture Color. MENU → → ENTER → [Picture] → → ENTER → [Custom ENTER→ [Tint] → , → ENTER Adds a natural tone to the display. Color Tone MENU → → ENTER → [Picture ENTER → [Color Tone] → , → ENTER The color tones can be changed. The - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 158
Adjusting the LCD Display Size → , → ENTER Color temp is a measure of the 'warmth' of the image colors. (Not available in Dynamic Contrast mode of On.) Note This function is only enabled if the Color Tone is set to Off. MENU → → ENTER → [Picture ENTER → [Size] → , → ENTER The Size can be - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 159
Adjusting the LCD Display Turns the Digital Noise Reduction feature Off/On. The Digital Noise Reduction feature allows you to enjoy clearer and crisper images. 1. Off 2. On Film Mode MENU → → ENTER → [Picture ENTER → [Film Mode ] → , → ENTER Turns Film Mode Off/On. The Film Mode feature offers you - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 160
Adjusting the LCD Display → , →ENTER Brightness Sensor is to automatically detect distribution of inputted visual signal and adjust to create optimum brightness. 1. Off 2. On Sound Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV Note • The TV menu is available when a TV tuner box is - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 161
Adjusting the LCD Display 3. Movie Selects Movie when viewing movies. 4. Speech Selects Speech when watching a show that is mostly dialogue (i.e., news). 5. Custom Selects Custom if you want to adjust the settings according to your personal preferences. Custom The sound settings can be adjusted to - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 162
control between broadcasters. 1. Off 2. On SRS TS XT MENU ENTER → [Sound ENTER → [SRS TS XT] → , → ENTER SRS TS XT is a patented SRS technology that solves the problem . 1. Off 2. On Note The direct button on the remote control is the 'SRS' button. Setup Available Modes • PC / DVI • AV - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 163
Adjusting the LCD Display • TV Note • The TV menu is available when a TV tuner box is installed. • The MagicInfo menu is available when a network box is installed. Language MENU ENTER → [Setup] → ENTER → [Language ] → , → ENTER You can choose one of 11 languages. Note The language chosen affects - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 164
120 6. 150 7. 180 On Timer MENU ENTER → [Setup] → → ENTER → [Time ENTER→ [On Timer] ENTER Turns the LCD Display on automatically at a preset time. Controls the mode and the volume level at the time the LCD Display turns on automatically. Off Timer MENU ENTER → [Setup] → → ENTER → [Time ENTER - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 165
Adjusting the LCD Display ENTER Turns the LCD Display off automatically at a preset time. Menu Transparency MENU ENTER → [Setup ENTER → [Menu Transparency] → , → ENTER Change the transparency of the background of the OSD. 1. High 2. Medium 3. Low 4. Opaque Safety Lock PIN MENU ENTER → [Setup - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 166
Note If you want to reduce the standby power consumption, set Energy Saving to On. However, when Energy Saving is On, you cannot use the remote Power On function of the MDC and the WOL (Wake On LAN) function of MagicInfo. HDMI Black Level MENU ENTER → [Setup ENTER → [HDMI Black Level - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 167
Adjusting the LCD Display → , → ENTER Turns Off/On the Video Wall function of the selected display Off/On. 1. Off 2. On Format MENU ENTER → [Setup ENTER → [Video Wall ]→ → ENTER → [Format] → , → ENTER The Format can be selected to see a divided screen. 1. Full Provides a full screen without any - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 168
Adjusting the LCD Display Sets how many parts the screen should be divided horizontally. Five adjustment levels: 1, 2, 3, 4, and 5. Vertical MENU ENTER → [Setup ENTER → [Video Wall ENTER → [Vertical] → , → ENTER Sets how many parts the screen should be divided vertically. Five adjustment levels: - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 169
Adjusting the LCD Display Pixel Shift Pixel Shift MENU ENTER → [Setup ENTER → [Safety Screen] → ENTER → [Pixel Shift] → ENTER → [Pixel Shift] → , → ENTER To prevent after-images on the screen you can use this function, so that every minute pixels on the PDP are moved in horizontal or vertical - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 170
Adjusting the LCD Display Time MENU ENTER → [Setup ENTER → [Safety Screen] → ENTER → [Pixel Shift ENTER → [Time] → , → ENTER Set the time interval for performing the horizontal or vertical movement, respectively. Timer Timer MENU ENTER → [Setup ENTER → [Safety Screen] → → ENTER → [Timer] → - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 171
Adjusting the LCD Display 2. Bar 3. Eraser Period MENU ENTER → [Setup ENTER → [Safety Screen] → → ENTER → [Timer ENTER → [Period] → , → ENTER Time Use this function to set the execution period for each mode set in the timer. MENU ENTER → [Setup ENTER → [Safety Screen] → → ENTER → [Timer - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 172
Adjusting the LCD Display Bar MENU ENTER → [Setup ENTER → [Safety Screen ENTER → [Bar] This function prevents after-images on the screen by moving long black and white vertical lines. Eraser MENU ENTER → [Setup ENTER → [Safety Screen ENTER → [Eraser] This function prevents after-images on - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 173
Adjusting the LCD Display 2. 1024 X 768 3. 1280 X 768 4. 1360 x 768 5. 1366 X 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x768 @ 60Hz. Power On Adjustment MENU ENTER → [Setup ENTER → [Power On - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 174
available when Video Wall is On. Color Reset MENU ENTER → [Setup ENTER → [Reset ]→ → ENTER → [Color Reset ] → , → ENTER Lamp Control MENU ENTER → [Setup ENTER → [Lamp Control ] → , → ENTER Adjusts the inverter lamp in order to reduce energy consumption. Note This function does not operate when - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 175
when a TV tuner box is installed. • The MagicInfo menu is available when a network box is installed. Multi Control Assigns an individual ID to the SET. MENU ENTER → [Multi Control ] → ENTER → , → [0~9] • ID Setup Assigns distinctive IDs to the SET. • ID Input Use to select the transmitter functions - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 176
Adjusting the LCD Display Note • The operating system for this set only supports English so the other languages might be corrupted on the screen. • For MagicInfo, a remote control is available for MagicInfo. However, it is recommended using a separate USB keyboard. • For MagicInfo in Device mode, - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 177
Auto Adjusting the LCD Display Automatically fits the image to the window. Original Shows the properties of the original file. Slide Show Displays the properties of the original file as they are. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 178
Interval Adjusting the LCD Display Controls the time intervals between image files for a slide show. (5 Sec, 10 Sec, 20 Sec, 30 Sec, 60 Sec) Rotation Displays an image file by turning it clockwise by 90 degrees. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 179
Zoom Adjusting the LCD Display Displays a reduced picture. Close Closes the image control Menu. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 180
Music Adjusting the LCD Display The MP3 file format is supported. Movie The MPEG1, WMV file format are supported. Play Plays a movie file. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 181
Full Size Adjusting the LCD Display Plays a movie file in full screen. OFFICE / HTML PPT(Power Point), DOC(MS Word), XLS(MS Excel), PDF, HTML, HTM files are displayed. Note • Install the proper viewer(freeware) program to see the MS Office(Word, Excel, Power Point) or PDF doucuments. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 182
Internet Adjusting the LCD Display Connects to the Internet Setup Sets various functions in MagicInfo mode. A password must be entered to access Setup mode. Schedule View Displays a schedule. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 183
TCP/IP Adjusting the LCD Display Changes the TCP/IP settings. Connection Modifies the network settings. - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 184
times, the setup configuration is reset and a warning message appears from the server. • If you forget the password, enter Info, 8, 2 and 4 on the remote control to initialize the password. This will reset the previous settings of Setup mode. Local : You can delete or copy files on both local and - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 185
Play Option Adjusting the LCD Display You can set the repeat play and screen settings. Repeat : Determines the repeat option for playing movies and music. • None - Select No Repeat to play a movie or tune in the list only once. • File Repeat - Select Repeat File to play a movie or tune in the list - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 186
Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems your video controller and computer support over 85Hz. Note Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 187
Troubleshooting • Do not use benzene, thinner or other flammable substances, or a wet cloth. • We recommend that a SAMSUNG cleansing agent is noisy, and video mode not supported, etc. In this case, first check the source of the problem, and then contact a Service Center or your dealer. 1. Check - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 188
Troubleshooting A: Check if the signal cable between the computer and the LCD Display is securely connected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems set for the computer video card falls in the range supported by the LCD Display. If not, reset them referring to - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 189
Troubleshooting A: Adjust color using Custom under OSD Color Adjustment menu. Q: Treble and Bass to the appropriate levels. Problems related to the Remote Control Note Problems related to the remote control and their solutions are listed. Q: The remote control buttons do not respond. A: Check the - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 190
the video card. Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) Q: How can I Adjusts the resolution? A: Windows XP: Set the resolution in the Control Panel → Appearance and Themes → Display → Settings - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 191
Troubleshooting Set the resolution at the Control Panel → Display → Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual play the video? A: The video supports the MPEG1 and WMV codecs only. problems yourself. If you do need assistance - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 192
Specifications General General Model Name SyncMaster 400MX(n) SyncMaster 460MX(n) LCD Panel Size Display area Pixel Pitch SyncMaster 400MX(n) SyncMaster 460MX(n) SyncMaster 400MX(n) SyncMaster 460MX(n) SyncMaster 400MX(n) SyncMaster 460MX(n) 40 " Diagonal (101 cm) 46 " Diagonal (116 cm) 885.17 - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 193
appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems. For example, the number of TFT-LCD sub pixels contained in this product are 3,133,440 (6,220,800). Note Design and specifications are subject to - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 194
English Windows XP Embedded - Install the proper viewing (freeware) program to see MS Office (Word, Excel, Power Point) or PDF documents. Not Support Flash, Java Applet, Security Site MagicInfo Pro - Server Requirement Note This is activated when a network box is installed in the MXn or MX model - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 195
will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows. Display Mode IBM, 640 x 350 IBM, 640 x 480 IBM, 720 x 400 MAC, 640 x 480 MAC, 832 x 624 MAC, 1152 - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 196
Specifications Display Mode VESA, 1280 X 960 VESA, 1280 X 1024 VESA, 1280 X 1024 VESA, 1360 x 768 VESA, 1600 x 1200 VESA, 1920 x 1080 Horizontal Vertical Fre- Pixel Clock Frequency quency (Hz) (MHz) (kHz) 60.000 60.000 108.000 63.981 60.020 108.000 79.976 75.025 135.000 47.712 60.015 - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 197
to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without any problems. • For example, the number of TFT-LCD sub pixels contained in this product are 3,133,440 (6,220,800). When cleaning the monitor and the panel - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 198
Information Power Off, Screen Saver, or Power Save Mode • Turn the power off for 4 hours after 20 hours in use • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 199
Power off, or set your PC, or System to operate a Screen Saver program when you are not using it. Also Warranty service will be limited based on instruction guide. Apply the Screen Scroll function on Product • Apply the Screen Scroll function - Symptom: Horizontal Bar with Black Color move up and - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 200
Pixel function on Product • Apply the Screen Pixel function - Symptom: Dot with Black Color move up and down. - Select method • Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Pixel • Time Interval : 1 ~ 10 hours ( Recommend : 1 ) • Time Period : 10 ~ 50 second ( Recommend : 50 ) • Apply - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 201
Information - Select method • Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Eraser • Time Interval : 1 ~ 10 hours ( Recommend : 1 ) • Time Period : 10 ~ 50 second ( Recommend : 50 ) Note ( Please check CD's User Guide at "OSD Function", some model's will not available ) - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 202
latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 203
-500-55-500 8-800-502-0000 8-10-800-500-55-500 http://www.samsung.ee http://www.samsung.com/lv http://www.samsung.lt http://www.samsung.com/kz_ru http://www.samsung.ru http://www.samsung.ua http://www.samsung.com/kz_ru AUSTRALIA CHINA INDIA INDONESIA JAPAN MALAYSIA NEW ZEALAND Asia Pacific 1300 - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 204
.com/th 0800-329-999 http://www.samsung.com/tw 1 800 588 889 http://www.samsung.com/vn SOUTH AFRICA TURKEY U.A.E Middle East & Africa 0860-SAMSUNG(726-7864) http://www.samsung.com/za 444 77 11 http://www.samsung.com/tr 800-SAMSUNG(726-7864) http://www.samsung.com/ae 8000-4726 Terms Dot - Samsung LH46MGPLBC/ZA | User Manual (ENGLISH) - Page 205
herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPM and DDC
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
 |
 |
SyncMaster 400MX,460MX,400MXn,460MXn
LCD Monitor
User Manual