Samsung LH65MGPLBF/ZA User Manual

Samsung LH65MGPLBF/ZA Manual

Get Samsung LH65MGPLBF/ZA PDF manuals and user guides View all Samsung LH65MGPLBF/ZA manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung LH65MGPLBF/ZA manual content summary:

  • Samsung LH65MGPLBF/ZA | User Manual - Page 1
    SyncMaster 650MP, 650FP LCD Display User Manual
  • Samsung LH65MGPLBF/ZA | User Manual - Page 2
    it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Shortcut to Anti-Afterimage Instructions Do not use a damaged power cord or plug or a damaged or loose power outlet. • Otherwise, this may result in electric shock or fire. Do not
  • Samsung LH65MGPLBF/ZA | User Manual - Page 3
    Installation Safety Instructions Ensure that the power plug is plugged into the power outlet • Otherwise, this may result in fire or electric shock. Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures, high humidity
  • Samsung LH65MGPLBF/ZA | User Manual - Page 4
    Clean Safety Instructions Keep heating appliances as far away from the power cord or the the front of the product on the floor. • Otherwise, this may result in damage to the screen display. Ensure that an authorized installation company installs the wall mount. • Otherwise, it may fall and cause
  • Samsung LH65MGPLBF/ZA | User Manual - Page 5
    Others Safety Instructions When cleaning the product, make sure to disconnect the voltage product. Do not disassemble, repair or modify the product yourself. • Otherwise, this may result in electric shock or fire. If the product needs to be repaired, contact a Service Center. If there is a strange
  • Samsung LH65MGPLBF/ZA | User Manual - Page 6
    Safety Instructions Do not try to move the monitor by pulling only the wire or the the product. • If water or a foreign material enters the product, disconnect the power cord and contact a Service Center. • This may result in a product malfunction, electric shock, or fire. Do not use or keep
  • Samsung LH65MGPLBF/ZA | User Manual - Page 7
    Safety Instructions Take a rest for at least five (5) minutes after using the monitor for one (1) hour. This reduces eye fatigue. Do not install it in an unstable
  • Samsung LH65MGPLBF/ZA | User Manual - Page 8
    Safety Instructions • The customer can return used or rechargeable batteries to a nearby occurs, it may cause an explosion or fire. If the product has been turned on for a long time, the display panel becomes hot. Do not touch it. Keep the small accessories in a location out of the reach of children
  • Samsung LH65MGPLBF/ZA | User Manual - Page 9
    Introduction Package Contents Note Please make sure the following items are included with your LCD Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional Make sure to keep the package box for transporting the product in the future. Unpacking LCD Display 8
  • Samsung LH65MGPLBF/ZA | User Manual - Page 10
    Manuals Introduction Quick Setup Guide Cables Warranty Card (Not available in all locations) User's Guide Power Cord Others D-Sub Cable Remote Control (BP59-00138A) Batteries (AAA X 2) BNC to RCA Adaptor Jack (Not available in all locations) Sold separately DVI Cable
  • Samsung LH65MGPLBF/ZA | User Manual - Page 11
    used to shield the cables from interference. • When connecting a cable, open the ferrite core and clip it around the cable near the plug. Your LCD Display Front MENU button [MENU] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the
  • Samsung LH65MGPLBF/ZA | User Manual - Page 12
    sensor. Power indicator Shows PowerSaver mode by blinking green Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods. Remote
  • Samsung LH65MGPLBF/ZA | User Manual - Page 13
    On/Off. POWER The power cord plugs into the LCD Display and the wall outlet. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port RGB IN (PC Connection Terminal (Input)) • Use a D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC) • Connect the RGB IN port on
  • Samsung LH65MGPLBF/ZA | User Manual - Page 14
    / DTV Set-Top Box) to the [R-AUDIO-L] port of the LCD Display. DVI OUT • Connect a monitor to another monitor through a DVI cable signals sent via the DVI OUT port are displayed on the second display which has the DVI IN port. Note Up of your LCD Display to the HDMI terminal of your digital output device using
  • Samsung LH65MGPLBF/ZA | User Manual - Page 15
    Displays can be connected (May not be supported depending on the connected cable). BNC/COMPONENT IN [R/Y, G/PB, B/ PR, H, V] (BNC/Component Connection Terminal (input)) - During BNC input, please check specifications , please see the network box user manual. • Purchasing the network box is optional
  • Samsung LH65MGPLBF/ZA | User Manual - Page 16
    Turns the product Off. Press to change the channel. The "-" button is used to select Digital channels. Electronic Program Guide (EPG) display. - This function does not work for this LCD Display. Adjusts the audio volume. Press the button to change the input signal SOURCE. Changing the SOURCE is only
  • Samsung LH65MGPLBF/ZA | User Manual - Page 17
    this LCD Display. TV channels provide written information services via teletext. Display. - This function does not work for this LCD Display. MTSYou can select MTS (Multichannel Television Stereo) mode. FM Stereo Audio Type Mono Stereo SAP MTS/S_Mode Mono Mono ↔ Stereo Mono ↔ SAP Default Manual
  • Samsung LH65MGPLBF/ZA | User Manual - Page 18
    VESA, make sure to comply with the international VESA standards. • Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG Distributor to place an order. After your order is placed, installation professionals will visit you and install the bracket. • At least
  • Samsung LH65MGPLBF/ZA | User Manual - Page 19
    a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • This
  • Samsung LH65MGPLBF/ZA | User Manual - Page 20
    Introduction There are two hinges(left and right). Use the correct one. A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2. Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too
  • Samsung LH65MGPLBF/ZA | User Manual - Page 21
    Introduction To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. Notice • Mount the
  • Samsung LH65MGPLBF/ZA | User Manual - Page 22
    firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A - LCD Display B - Wall Bracket C - Wall Wall Bracket Angle Adjustment Adjust the bracket angle to -2° before installing it on the wall. 1. Fix the product to the
  • Samsung LH65MGPLBF/ZA | User Manual - Page 23
    Introduction Make sure to use the top center, and not the left or the right side of the product to adjust the angle. 22
  • Samsung LH65MGPLBF/ZA | User Manual - Page 24
    . Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, [RGB IN] port on the back of your LCD Display and the 15 pin D-sub Port on the computer. Using the DVI (Digital) connector on the video card. • Connect the DVI Cable to the [DVI
  • Samsung LH65MGPLBF/ZA | User Manual - Page 25
    Connections Using the HDMI (digital) output on the graphics card. • Connect the [HDMI IN] port on the LCD Display to the HDMI port on the PC using the HDMI cable. Note When the HDMI cable to the PC, ensure that you select HDMI from
  • Samsung LH65MGPLBF/ZA | User Manual - Page 26
    . Turn on the power switch. Note • Turn on both your computer and the LCD Display. • Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices • AV input devices such as DVD players, VCRs or camcorders as well as your computer can
  • Samsung LH65MGPLBF/ZA | User Manual - Page 27
    cable between the VIDEO OUTPUT jack on the camcorder and the [AV IN [VIDEO]] on the LCD Display . 3. Select AV for the Camcorder connection using the SOURCE button on the front of the LCD Display or on the remote control. 4. Then, start the Camcorder with a tape inserted. Note The audio-video cables
  • Samsung LH65MGPLBF/ZA | User Manual - Page 28
    input port on another monitor using a stereo cable. 3. Select DVI using the SOURCE button on the front of the LCD Display or on the remote control. Note DVI OUT does not support HDCP. Connecting Using a HDMI Cable 1. Connect input devices such as a Blu-Ray/DVD player to the [HDMI IN] terminal of
  • Samsung LH65MGPLBF/ZA | User Manual - Page 29
    Connections Note In HDMI mode, only PCM format audio is supported. Connecting Using a DVI to HDMI Cable 1. Connect the DVI output terminal of a digital output device to the [HDMI IN] terminal of the LCD Display using a DVI to HDMI cable. 2. Connect the red and white jacks of an RCA to stereo (for PC
  • Samsung LH65MGPLBF/ZA | User Manual - Page 30
    to a DVD player using the SOURCE button on the front of the LCD Display or on the remote control. • Then, start the DVD Player with a DVD cable is optional. • For an explanation of Component video, consult your DVD manual. Connecting a DTV Set Top (Cable/Satellite) Box 1. Connect a Component cable
  • Samsung LH65MGPLBF/ZA | User Manual - Page 31
    Connections Connecting to an Audio System 1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and [AUDIO OUT] on LCD Display. 25
  • Samsung LH65MGPLBF/ZA | User Manual - Page 32
    system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web site : http://www.samsung.com/ Installing the Monitor Driver (Automatic) 1. Insert CD into the CD-ROM drive. 2. Click "Windows". 3. Choose your monitor model in the model list
  • Samsung LH65MGPLBF/ZA | User Manual - Page 33
    www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft® Windows Vista™, Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click (Start) and "Control Panel". Then, double-click on "Appearance and Personal- ization". 3. Click "Personalization" and then "Display Settings
  • Samsung LH65MGPLBF/ZA | User Manual - Page 34
    If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue". Note This monitor driver is under certifying MS logo, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage. 6. Click "Update Driver..." in
  • Samsung LH65MGPLBF/ZA | User Manual - Page 35
    Using the Software 9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence. Microsoft® Windows® XP Operating System 29
  • Samsung LH65MGPLBF/ZA | User Manual - Page 36
    Using the Software 1. Insert CD into the CD-ROM drive. 2. Click "Start" → "Control Panel", then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...". 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5.
  • Samsung LH65MGPLBF/ZA | User Manual - Page 37
    "OK" button. Note This monitor driver is certified by Microsoft,, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button, then click the "OK" button continually. 31
  • Samsung LH65MGPLBF/ZA | User Manual - Page 38
    steps. 5. Click "Driver" and then click on "Update Driver...", then click on the "Next" button. 6. Choose "Display a list of the known drivers for this device so that I can choose a specific driver", then click "Next" and then click "Have disk". 7. Click the "Browse" button, then choose A:(D:\Driver
  • Samsung LH65MGPLBF/ZA | User Manual - Page 39
    Choose "Specify the location of the driver". 7. Choose "Display a list of all the driver in a specific location...", then click "Next" button. 8. Click the " at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide. Linux
  • Samsung LH65MGPLBF/ZA | User Manual - Page 40
    If the popup window to install the software for the main screen is not displayed, proceed with the installation using the MDC executable file on the CD. not appear depending on specification of computer system or monitor. If that happens, press F5 Key. Installation Problems The installation of MDC
  • Samsung LH65MGPLBF/ZA | User Manual - Page 41
    Using MDC Using the Software 35
  • Samsung LH65MGPLBF/ZA | User Manual - Page 42
    of serial communication, is used for the communication between a PC and a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a display. Main Screen Click Start > Program > Samsung > MDC System to start the program. Select a set to see the
  • Samsung LH65MGPLBF/ZA | User Manual - Page 43
    Control Tools 1. Use the main icons to switch into each screen. 2. Allows you to enable or disable the remote control signal receiving function of the display unit. 3. Set the Safety Lock function. When setting the Lock function, you can only operate power and lock buttons on the remote control and
  • Samsung LH65MGPLBF/ZA | User Manual - Page 44
    COM1 is used, COM1 through COM4 can be selected in the Port Selection Menu. 3. If the exact port name that is connected to the LCD Display using a serial cable is not selected, communication will be unavailable. 4. The selected port is stored in the program and used for the next program as
  • Samsung LH65MGPLBF/ZA | User Manual - Page 45
    Info Grid shows some basic information necessary to Power Control. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Use the Select All button or Check Box to choose a display to control.
  • Samsung LH65MGPLBF/ZA | User Manual - Page 46
    selection or choose Select All, the value returns to the default value 10) 3) (Mute On/Off) - Turns on/off the Mute function of the selected display. When selecting one set at a time, turn on the Mute function for the selected set. The Mute function is disabled automatically when you adjust the
  • Samsung LH65MGPLBF/ZA | User Manual - Page 47
    • PC Mode
  • Samsung LH65MGPLBF/ZA | User Manual - Page 48
    to Component. 9) MagicInfo - The Input source of MagicInfo works only on MagicInfo model. 10) HDMI - Changes the Input Source of the selected display to HDMI. 11) Channel - Channel arrow appears when the Input Source is TV. TV Source can be selected only in products with TV and controlling
  • Samsung LH65MGPLBF/ZA | User Manual - Page 49
    necessary to Image Size Control. 1) ( Power Status) - Shows the power status of the current display. 2) Image Size - Shows the current Image Size of the display in use. 3) Input - Info Grid displays only the displays whose Input Source is PC, BNC, DVI. 4) PC Source - When you click Image Size
  • Samsung LH65MGPLBF/ZA | User Manual - Page 50
    Video Source tab to adjust Image Size for TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV. Click Select All or use Check Box to select a display to control. 2) Info Grid displays only the display having TV, AV, S-Video, Component or DVI(HDCP) as input source. 3) Switch Image Size of the selected
  • Samsung LH65MGPLBF/ZA | User Manual - Page 51
    and the Time Control screen appears. Info Grid shows some basic information necessary to Time Control. 1) Current Time - Set the current time for the selected display (PC Time). - To change the current time, first change the PC Time. 2) On Time Setup - Set the Hour, Minute, AM/PM of On Time Setup
  • Samsung LH65MGPLBF/ZA | User Manual - Page 52
    some basic information necessary to PIP Size Control. 1) PIP Size - Shows the current PIP Size of the display in use. 2) OFF - Turns off the PIP of the selected display. 3) Large - Turns on the PIP of the selected display and changes the size to Large. 4) Small - Turns on the PIP of the selected
  • Samsung LH65MGPLBF/ZA | User Manual - Page 53
    PIP Source Control. 1) PIP Source - PIP Source can be controlled with turning on the LCD Display power. 2) PC - Changes the source of the PIP of the selected display to PC. 3) BNC - Changes the source of the PIP of the selected display to BNC. 4) DVI - Changes the source of the PIP of the selected
  • Samsung LH65MGPLBF/ZA | User Manual - Page 54
    shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide.When selected, each function fetches the value for the set and displays it on the slide bar. When "Select All" is chosen, the default value is
  • Samsung LH65MGPLBF/ZA | User Manual - Page 55
    Off. The Input source of TV works only on TV model. This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed. Settings Picture PC 1. Click Settings of the main icons and the Settings Control screen appears. Info Grid
  • Samsung LH65MGPLBF/ZA | User Manual - Page 56
    model. Color Temp is only enabled if the Color Tone is set to Off. This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed. Settings Audio 1. Click Settings of the main icons and the Settings Control screen appears.
  • Samsung LH65MGPLBF/ZA | User Manual - Page 57
    shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When selected, each function fetches the value for the set and displays it on the slide bar. When "Select All" is chosen, the default value is
  • Samsung LH65MGPLBF/ZA | User Manual - Page 58
    source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. Settings Control is available only for the displays for which the power status is ON. Maintenance Lamp Control 1. Click on the "Maintenance" icon in the Main Icon column to
  • Samsung LH65MGPLBF/ZA | User Manual - Page 59
    regardless of the time. The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control. The Maintenance Control feature is available only for the displays whose power status is ON. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works
  • Samsung LH65MGPLBF/ZA | User Manual - Page 60
    be moved finely at the specified time interval. 3) Safety Screen - The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor for a long time. The Interval item is used to set the repetition cycle in hour units and the Time item is used
  • Samsung LH65MGPLBF/ZA | User Manual - Page 61
    . z The place will be set up by pressing a number in the selected mode. z The MDC program supplied by Samsung supports up to 5x5 LCD Displayes. 3) On / Off - Turns on/off the Video Wall function of the selected display. 4) Format - The format can be selected to see a divided screen. z Full z Natural
  • Samsung LH65MGPLBF/ZA | User Manual - Page 62
    in MagicInfo. The Input source of TV works only on TV model. The Maintenance Control function is available only for the displays where the power status is ON. Troubleshooting 1. The display you wish to control does not appear on the Power Control Info Grid - Check the connection of RS232C. (Check if
  • Samsung LH65MGPLBF/ZA | User Manual - Page 63
    2. Selected one display: Fetches and displays the settings value for the selected display. 3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of ID 1, fetches and displays the value of ID3. 4. Selected all sets using Select All: Returns
  • Samsung LH65MGPLBF/ZA | User Manual - Page 64
    Adjusting the LCD Display Input Available Modes • PC / DVI / BNC • AV • Component • HDMI • MagicInfo Note → , → ENTER Use to select PC, DVI or other external input sources connected to the LCD Display. Use to select the screen of your choice. 1. PC 2. DVI 3. AV 4. Component 5. HDMI 6. MagicInfo 7.
  • Samsung LH65MGPLBF/ZA | User Manual - Page 65
    The PIP function is not available when Video Wall is On. When external AV devices such as VCRs or DVDs are connected to the LCD Display , PIP allows you to watch video from those devices in a small window super-imposed on the PC Video signal. (Off/On) MENU → ENTER → Note → → ENTER
  • Samsung LH65MGPLBF/ZA | User Manual - Page 66
    Adjusting the LCD Display Swap • PC : DVI / AV / Component / HDMI • BNC : DVI / AV / HDMI • DVI / AV : PC / BNC • Component : PC • HDMI : PC / BNC MENU → ENTER → → →ENTER → → → →ENTER → Size Swaps
  • Samsung LH65MGPLBF/ZA | User Manual - Page 67
    easier. VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo / DHR / PC / DVI Devices Note • The displayed devices differ depending on the external input mode. • When connecting a PC to the HDMI or DVI terminal, set Edit Name to PC. In other
  • Samsung LH65MGPLBF/ZA | User Manual - Page 68
    Adjusting the LCD Display are common signals for AV and PC, make sure to set the Edit Name in accordance with the input signal. • The Picture menu changes depending
  • Samsung LH65MGPLBF/ZA | User Manual - Page 69
    Adjusting the LCD Display For documents or works involving heavy text. 4. Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable
  • Samsung LH65MGPLBF/ZA | User Manual - Page 70
    Adjusting the LCD Display → , → ENTER The color tones can be changed. (Not available when Dynamic Contrast is set to On.) 1. Off 2. Cool 3. Normal 4. Warm 5. Custom Note If you set
  • Samsung LH65MGPLBF/ZA | User Manual - Page 71
    Adjusting the LCD Display → , → ENTER 3. Blue MENU → → ENTER → → ENTER → ENTER → → → → , → ENTER Color Temp. MENU → → ENTER → ENTER → → , → ENTER Color Temp. is a measure of the 'warmth' of the image colors. (Not
  • Samsung LH65MGPLBF/ZA | User Manual - Page 72
    Adjusting the LCD Display → , → ENTER Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). Position MENU → →
  • Samsung LH65MGPLBF/ZA | User Manual - Page 73
    Adjusting the LCD Display → , → ENTER Selects either On or Off with the signal control. Signal Control MENU → → ENTER → → ENTER → → ENTER → 1. R-Gain MENU → → ENTER → ENTER → → ENTER → → → ENTER → → , → ENTER 2. G-Gain MENU → →
  • Samsung LH65MGPLBF/ZA | User Manual - Page 74
    Adjusting the LCD Display MENU → → → ENTER → → ENTER → → ENTER ENTER Size → , → ENTER MENU → → ENTER → ENTER → → , → ENTER The Size can be switched. 1. 16:9 2. 4:3 HDMI Black Level MENU → → ENTER → ENTER → → , → ENTER When
  • Samsung LH65MGPLBF/ZA | User Manual - Page 75
    Adjusting the LCD Display PIP Picture MENU → → ENTER → ENTER → → , → ENTER Adjusts the PIP Screen Settings. Note • Available Modes: PIP ON 1. Contrast MENU → → ENTER → → → ENTER→ ENTER → , → ENTER Adjusts the Contrast
  • Samsung LH65MGPLBF/ZA | User Manual - Page 76
    Adjusting the LCD Display Note This function is not available if PC signal is received while in DVI or HDMI mode. 5. Tint MENU → → ENTER → ENTER → ENTER → → , → ENTER Adds a natural
  • Samsung LH65MGPLBF/ZA | User Manual - Page 77
    Adjusting the LCD Display Brightness Sensor MENU → → ENTER → ENTER → → , → ENTER Brightness Sensor the same time. MENU → → ENTER → → ENTER → → , → ENTER The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory.
  • Samsung LH65MGPLBF/ZA | User Manual - Page 78
    Adjusting the LCD Display Dynamic, Standard, Movie, or Custom can be activated. (Not available when Dynamic Contrast is set to On.) 1. Dynamic 2. Standard 3. Movie 4. Custom Custom By using the
  • Samsung LH65MGPLBF/ZA | User Manual - Page 79
    Tint → , → ENTER Adjusts the picture Color. MENU → → ENTER → → → → ENTER → ENTER → , → ENTER Adds a natural tone to the display. Color Tone MENU → → ENTER → → → → ENTER → → , → ENTER The color tones can be changed. The individual Color components are also user adjustable. (Not available
  • Samsung LH65MGPLBF/ZA | User Manual - Page 80
    720p, 1080i, 1080p signals are input. (Not available when Dynamic Contrast is set to On.) Note • Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Screen Fit feature. • Zoom 1, Zoom 2 are unavailable in HDMI mode. • The Position and
  • Samsung LH65MGPLBF/ZA | User Manual - Page 81
    Adjusting the LCD Display 1. Off 2. On Note Digital NR function is not available for all resolutions. HDMI Black Level MENU → → ENTER → → → → ENTER → → , → ENTER When a DVD or set-top box
  • Samsung LH65MGPLBF/ZA | User Manual - Page 82
    Adjusting the LCD Display 1. Off 2. On PIP Picture MENU → → ENTER → ENTER → → , → ENTER Adjusts the PIP Screen Settings. Note • Available Modes: PIP ON 1. Contrast MENU → → ENTER → → ENTER→ ENTER → → , → ENTER Adjusts
  • Samsung LH65MGPLBF/ZA | User Manual - Page 83
    Adjusting the LCD Display → , → ENTER Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. 1. Off 2. On (Disabled when PIP is set
  • Samsung LH65MGPLBF/ZA | User Manual - Page 84
    ) mode. • Custom : use to reduce the afterimage and judder as much as you want. • Demo : demonstrates Auto Motion Plus 120Hz (the picture will be displayed on the left half of the screen when Auto Motion Plus 120Hz is set to on). 2. Custom a. MENU → → ENTER → [Picture ENTER → [Auto Motion Plus
  • Samsung LH65MGPLBF/ZA | User Manual - Page 85
    is connected. • The HDMI port and network box cannot be connected at the same time. MENU ENTER → → ENTER → → , → ENTER The LCD Display has a built-in high fidelity stereo amplifier. 1. Standard Selects Standard for the standard factory settings. 2. Music Selects Music when watching music videos
  • Samsung LH65MGPLBF/ZA | User Manual - Page 86
    Adjusting the LCD Display Selects Custom if you want to adjust the settings according to your personal preferences. Custom The sound settings can be adjusted to suit your personal
  • Samsung LH65MGPLBF/ZA | User Manual - Page 87
    Adjusting the LCD Display Reduces the difference in volume control between broadcasters. 1. Off 2. On SRS TS XT MENU ENTER → ENTER → → , → ENTER SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround XT delivers a
  • Samsung LH65MGPLBF/ZA | User Manual - Page 88
    Adjusting the LCD Display Setup → , → ENTER When you use the product with it connecting to a Home theater, turn the Internal speakers off so you can listen to sound from
  • Samsung LH65MGPLBF/ZA | User Manual - Page 89
    Adjusting the LCD Display You can choose one of 13 languages. Note The language → → ENTER → → → ENTER → → ENTER→ ENTER Current Time Setting. Sleep Timer MENU ENTER → → → ENTER → → → ENTER→ → , → ENTER Turns the LCD Display off automatically at certain times. 1. Off 2. 30 3. 60 4. 90 61
  • Samsung LH65MGPLBF/ZA | User Manual - Page 90
    120 6. 150 7. 180 On Timer MENU ENTER → → → ENTER → → → → ENTER→ ENTER Turns the LCD Display on automatically at a preset time. Controls the mode and the volume level at the time the LCD Display turns on automatically. Off Timer MENU ENTER → → → → ENTER → ENTER ENTER Turns the LCD
  • Samsung LH65MGPLBF/ZA | User Manual - Page 91
    Change PIN MENU ENTER → → ENTER → → ENTER → [0∼9] → [0∼9] → [0∼9] → [0∼9] The password can be changed. Note The preset password for the LCD Display is "0000". Lock On MENU ENTER → ENTER → ENTER → → → → [0∼9] → [0∼9] → [0∼9] → [0∼9] This is the function that locks the OSD in order
  • Samsung LH65MGPLBF/ZA | User Manual - Page 92
    Adjusting the LCD Display → , → ENTER This feature adjusts the power consumption of the unit in order to save energy. 1. → → ENTER → ENTER → → , → ENTER Turns Off/On the Video Wall function of the selected display Off/On. 1. Off 2. On Format MENU ENTER ENTER → ENTER → → , → ENTER 64
  • Samsung LH65MGPLBF/ZA | User Manual - Page 93
    Format can be selected to see a divided screen. 1. Full Provides a full screen without any margins. 2. Natural Displays a natural image with the original aspect ratio intact. Horizontal MENU ENTER ENTER → ENTER → → , → ENTER Sets how many parts the screen should be divided horizontally
  • Samsung LH65MGPLBF/ZA | User Manual - Page 94
    a number in the selected mode. Safety Screen The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time. • The Safety Screen function scrolls the screen for the specified period of time. • This function is not
  • Samsung LH65MGPLBF/ZA | User Manual - Page 95
    Adjusting the LCD Display Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4. Vertical MENU ENTER → → ENTER → ENTER → → → → ENTER → → , → ENTER Time Sets how many pixels the
  • Samsung LH65MGPLBF/ZA | User Manual - Page 96
    Adjusting the LCD Display You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be performed for
  • Samsung LH65MGPLBF/ZA | User Manual - Page 97
    on the LCD according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time. Bar MENU ENTER → ENTER → ENTER → This function prevents after-images on the screen by moving
  • Samsung LH65MGPLBF/ZA | User Manual - Page 98
    of the grey for the screen background. 1. Off 2. Light 3. Dark Resolution Select MENU ENTER → → ENTER → , → ENTER When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz
  • Samsung LH65MGPLBF/ZA | User Manual - Page 99
    Adjusting the LCD Display Note Available in PC mode only 1. Off 2. 1024 X 768 3. 1280 X 768 4. 1360 x 768 5. 1366 X 768 Note Selecting the menu is only allowed when the graphics
  • Samsung LH65MGPLBF/ZA | User Manual - Page 100
    Adjusting the LCD Display 1. Landscape 2. Portrait Reset Reverts the product settings to factory defaults. The Reset function is only available when PC / DVI is being used. MENU ENTER → → ENTER →
  • Samsung LH65MGPLBF/ZA | User Manual - Page 101
    Adjusting the LCD Display • Component • HDMI • MagicInfo Note • MagicInfo can only be enabled when a network box is connected. • The HDMI port and network box cannot be connected at the
  • Samsung LH65MGPLBF/ZA | User Manual - Page 102
    highly recommended not to turn off the AC power during an operation. • For pivoted LCD Displays, ticker transparency is not supported. • For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for movies. • For drive D:, EWF is not applied. • To save Setup contents that have
  • Samsung LH65MGPLBF/ZA | User Manual - Page 103
    Adjusting the LCD Display You can select an Application to be executed in your computer when Windows starts. 2. Select TCP/IP - step 2 In step 2 of MagicInfo Setup Wizard, you
  • Samsung LH65MGPLBF/ZA | User Manual - Page 104
    Adjusting the LCD Display When using multiple languages, you can choose and set a specific language among them. 4. Select Screen Type - step 4 You can select which rotation type will be applied to your device. 5. Setup Information 76
  • Samsung LH65MGPLBF/ZA | User Manual - Page 105
    Adjusting the LCD Display Shows the settings that have been selected by the user. Note If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo icon on the window desktop. The icon will appear. 77
  • Samsung LH65MGPLBF/ZA | User Manual - Page 106
    Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the LCD Display. 2. Unplug the video cable from the back
  • Samsung LH65MGPLBF/ZA | User Manual - Page 107
    LCD Display to become blank, have poor coloring, become noisy, etc. In this case, first check the source of the problem, and then contact a Service Center the MagicInfo Troubleshooting section. Problems related to the Installation (PC Mode) Note Problems related to the LCD Display installation and
  • Samsung LH65MGPLBF/ZA | User Manual - Page 108
    Troubleshooting A: Check if the signal cable between the computer and the LCD Display is securely connected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: The screen is blank and the power indicator
  • Samsung LH65MGPLBF/ZA | User Manual - Page 109
    Troubleshooting Q: The screen color is inconsistent. A: Adjust color using Custom under , check the cable connection between the LCD Display and the computer to ensure that the connector is properly connected. Problems related to Audio Note Problems related to audio signals and their solutions are
  • Samsung LH65MGPLBF/ZA | User Manual - Page 110
    Troubleshooting A: Windows / Computer Manual). Q: How can I clean the outer case/LCD Panel? A: Disconnect the power cord and then clean the LCD Display with a soft Do not let any water enter the LCD Display. Q: How can I play the video? A: The video supports the MPEG1 and WMV codecs only. Install
  • Samsung LH65MGPLBF/ZA | User Manual - Page 111
    Troubleshooting Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. 83
  • Samsung LH65MGPLBF/ZA | User Manual - Page 112
    Specifications General General Model Name SyncMaster 650MP, 650FP LCD Panel Size Display area Pixel Pitch 65 " Diagonal (163 cm) 1428.48 mm (H) x 803.52 mm (V) 0.744 mm (H) x 0.744 mm (V) Synchronization Horizontal Vertical 30 ~ 81 kHz 50 ~ 85 Hz Display Supply This product supports 100 - 240
  • Samsung LH65MGPLBF/ZA | User Manual - Page 113
    and you can use it without any problems. For example, the number of TFT-LCD sub pixels contained in this product are 6,220,800. Note Design and specifications are subject to change without prior notice. Class A Equipment PowerSaver This LCD Display has a built-in power management system called
  • Samsung LH65MGPLBF/ZA | User Manual - Page 114
    automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows. Display Mode IBM, 640 x 350 IBM, 640 x 480 IBM, 720 x 400 MAC, 640 x 480 MAC, 832 x 624 MAC, 1152 x 870 VESA, 640 x 480
  • Samsung LH65MGPLBF/ZA | User Manual - Page 115
    Specifications called the Vertical Frequency or Refresh Rate. Unit: Hz 87
  • Samsung LH65MGPLBF/ZA | User Manual - Page 116
    seen. This is not from bad quality and you can use it without any problems. • For example, the number of TFT-LCD sub pixels contained in this better quality of picture by performing the "Auto Adjustment function" in display screen that is appeared as window termination button is pressed. If there
  • Samsung LH65MGPLBF/ZA | User Manual - Page 117
    after 20 hours in use • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one color or a moving image is recommended. Change the Color Information periodically Note Use
  • Samsung LH65MGPLBF/ZA | User Manual - Page 118
    with movement. • Have the images and logo cycle periodically. - Cycle: Display moving image together with Logo for 60 seconds after 4 hours in use. Horizontal Bar with Black Color move up and down. - Select method • Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Screen Scroll • Time Interval
  • Samsung LH65MGPLBF/ZA | User Manual - Page 119
    Pixel function - Symptom: Dot with Black Color move up and down. - Select method • Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Pixel • Time Interval : 1 ~ 10 blocks move while erasing the display - Select method • Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Eraser 91
  • Samsung LH65MGPLBF/ZA | User Manual - Page 120
    Information • Time Interval : 1 ~ 10 hours ( Recommend : 1 ) • Time Period : 10 ~ 50 seconds ( Recommend : 50 ) 92
  • Samsung LH65MGPLBF/ZA | User Manual - Page 121
    or comments relating to Samsung products, please contact the SAMSUNG customer care center. U.S.A CANADA MEXICO North America 1-800-SAMSUNG(726-7864) http://www.samsung.com/us 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca 01-800-SAMSUNG (726-7864) http://www.samsung.com/mx ARGENTINA BRAZIL
  • Samsung LH65MGPLBF/ZA | User Manual - Page 122
    022 - 607 - 93 - 33 808 20 - SAMSUNG http://www.samsung.com/pt (7267864) 0800-SAMSUNG (726-7864) http://www.samsung.com/sk 902 - 1 - SAMSUNG(902 172 http://www.samsung.com/es 678) 0771 726 7864 (SAMSUNG) http://www.samsung.com/se 0848 - SAMSUNG (7267864, http://www.samsung.com/ch CHF 0.08/min) 0845
  • Samsung LH65MGPLBF/ZA | User Manual - Page 123
    .com/th 0800-329-999 http://www.samsung.com/tw 1 800 588 889 http://www.samsung.com/vn SOUTH AFRICA TURKEY U.A.E Middle East & Africa 0860-SAMSUNG(726-7864) http://www.samsung.com/za 444 77 11 http://www.samsung.com/tr 800-SAMSUNG(726-7864) http://www.samsung.com/ae 8000-4726 Terms Dot
  • Samsung LH65MGPLBF/ZA | User Manual - Page 124
    Interlace and Non-Interlace Methods Plug & Play Resolution Correct Disposal The screen must be redrawn several times per second in order to create and display an image for the user. The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate. Unit: Hz Example: If
  • Samsung LH65MGPLBF/ZA | User Manual - Page 125
    countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be contact your service provider. Authority Information in this document is subject to change without notice. © 2009 Samsung Electronics Co.,
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
SyncMaster 650MP, 650FP
LCD Display
User Manual