Samsung LN52A650A1F Firmware Update Instruction. ( )

Network Connection - Wireless

You can connect to the Samsung’s Infolink network wirelessly through a wireless IP sharer.

TV Side Panel

Wireless LAN Adapter

for InfoLink

LAN Cable

Wireless IP sharer

The LAN Port on

the Wall

1.

Connect the Samsung

Infolink Wireless adapter

into the Wiselink terminal

of the TV.

You must use the Samsung Wireless LAN Adapter for InfoLink(WIS-08BG) to use a wireless network.

The Samsung Wireless LAN Adapter for InfoLink is sold separately. Contact a Samsung Electronics agent or service

center for purchasing.

To use a wireless network, your TV must be connected to a wireless IP sharer.

If the wireless IP sharer supports DHCP, you TV can use a DHCP or static IP address to connect to the wireless

network.

You must use a wireless IP sharer that supports IEEE 802.11 B or IEEE 802.11G.

If the wireless IP sharer allows you to turn on/off the Ping connection function, turn it on.

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer

is currently being used by another device nearby, this will result in interference and communications may fail.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

1) Authentication Mode : WEP, WPAPSK, WPA2PSK

2) Encryption Type : WEP, TKIP, AES

If you apply a security system other than the systems listed above, it will not work with the TV.

Network selection

Select Cable or Wireless as the method to connect to the Samsung’s Infolink

network.

1.

Press the

MENU

button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the

ENTER

button.

2.

Press the ▲ or ▼ button to select “Network selection”, then press the

ENTER

button.

3.

Press the ▲ or ▼ button to select “Cable” or “Wireless”, then press the

ENTER

button.

Cable

: Connect to Samsung’s Infolink network using a cable.

Wireless

: Connect to Samsung’s Infolink network wirelessly.

The menu is activated only if the Samsung Wireless LAN Adapter for

InfoLink is connected. (See page 107)

Language

: English

Time

Network selection

: Cable

►

Cable Network Setup

Wireless Network Setup

V-Chip

Caption

External Settings

Entertainment

: Off

Energy Saving

: Off

Language

: English

Time

Network selection

: Cable

►

Cable Network Setup

Wireless Network Setup

V-Chip

Caption

External Settings

Entertainment

: Off

Energy Saving

: Off

Cable

Wireless