Samsung LS27A650DS/ZA User Manual

Samsung LS27A650DS/ZA Manual

Samsung LS27A650DS/ZA manual content summary:

  • Samsung LS27A650DS/ZA | User Manual - Page 1
    User Manual SyncMaster S22A650D S24A650D S27A650D S24A850DW The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00081A-04
  • Samsung LS27A650DS/ZA | User Manual - Page 2
    without notice to improve quality. © 2011 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of
  • Samsung LS27A650DS/ZA | User Manual - Page 3
    Before Using the Product Activities marked by this symbol are prohibited. Instructions marked by this symbol must be followed. 3 Before Using the Product
  • Samsung LS27A650DS/ZA | User Manual - Page 4
    Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and
  • Samsung LS27A650DS/ZA | User Manual - Page 5
    white stains on the surface if an ultrasonic wave humidifier is used nearby. Be sure to contact Samsung Customer Service Center (84page) if the inside of the monitor needs cleaning. (service fee will be charged). Safety Precautions Electricity and Safety The following images are for reference only
  • Samsung LS27A650DS/ZA | User Manual - Page 6
    Before Using the Product Warning Do not use a damaged power cord or plug, or a loose power socket. z An electric shock or fire may result. Do not plug many products into the same power socket. z Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. z
  • Samsung LS27A650DS/ZA | User Manual - Page 7
    not use the power cord for products other than authorized products supplied by Samsung. ! z An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. z If any problem occurs in the product, unplug the power cable to completely ! cut the power
  • Samsung LS27A650DS/ZA | User Manual - Page 8
    Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). z The product may fall and break or cause a personal injury. z Using the product in an area with excess vibration may damage the product or cause a fire. Do not install
  • Samsung LS27A650DS/ZA | User Manual - Page 9
    a fire or electric shock may result. If the product generates a strange noise, a burning smell, or smoke, remove the power cord immediately and contact Samsung Customer Service Center (84page). ! z An electric shock or fire may result. Do not let children hang from the product or climb on top of it
  • Samsung LS27A650DS/ZA | User Manual - Page 10
    Before Using the Product Do not put a heavy object, toy, or sweets on top of the product. z The product or heavy objects may fall as children try to reach for the toy or sweets resulting in a serious injury. During a lightning or thunderstorm, remove the power cord and do not touch the antenna
  • Samsung LS27A650DS/ZA | User Manual - Page 11
    . z If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (84page). z Product failure, an electric shock or fire may result. Do not place objects containing liquid (vases, pots, bottles, etc) or
  • Samsung LS27A650DS/ZA | User Manual - Page 12
    Before Using the Product Do not let water enter the DC power device or get the device wet. z An electric shock or fire may result. z Avoid using the product outdoors where it can be exposed to rain or snow. z Be careful not to get the DC power adapter wet when you wash the floor. Do not put the DC
  • Samsung LS27A650DS/ZA | User Manual - Page 13
    Before Using the Product Exercise caution when adjusting the product angle or stand height. z Otherwise, children's fingers or hands may become stuck and injured. ! z Tilting the product excessively may cause it to fall and result in personal injury. Do not place heavy objects on the product.
  • Samsung LS27A650DS/ZA | User Manual - Page 14
    21 21 23 25 25 26 26 27 28 29 CONNECTING AND USING 30 A SOURCE DEVICE 30 Copyright Icons used in this manual Symbols for safety precautions Cleaning Cleaning Securing the Installation Space Precautions for storage Safety Precautions Electricity and Safety Installation Operation Correct posture to
  • Samsung LS27A650DS/ZA | User Manual - Page 15
    SA850 Model Only) Connecting a PC to the Product Utilizing the Product as a USB HUB Connecting the Power MAGIC SAMSUNG MAGIC Bright SAMSUNG MAGIC Color Brightness Configuring Brightness Contrast Configuring Contrast Sharpness Configuring Sharpness Coarse Adjusting Coarse Fine Adjusting Fine Response
  • Samsung LS27A650DS/ZA | User Manual - Page 16
    Table Of Contents 50 50 51 51 52 52 53 53 RESIZING OR 54 RELOCATING THE 54 SCREEN 55 55 56 56 SETUP AND RESET 57 57 59 62 63 65 65 66 66 67 67 68 68 Green Configuring Green Blue Configuring Blue Color Tone Configuring the Color Tone Settings Gamma Configuring Gamma Image Size Changing the Picture
  • Samsung LS27A650DS/ZA | User Manual - Page 17
    72 72 73 73 74 74 INFORMATION MENU AND 75 OTHERS 75 75 TROUBLESHOOTING 76 GUIDE 76 76 76 79 SPECIFICATIONS 80 81 82 Display Time Configuring Display Time in the Startup Screen Requirements Before Contacting Samsung Customer Service Center Testing the Product Checking the Resolution and Frequency
  • Samsung LS27A650DS/ZA | User Manual - Page 18
    Table Of Contents 88 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 89 Terminology INDEX 18 Table Of Contents
  • Samsung LS27A650DS/ZA | User Manual - Page 19
    1 Preparations 1.1 Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. 2 Remove the Styrofoam from the product. 3 Check the components and remove the Styrofoam and plastic bag. z The
  • Samsung LS27A650DS/ZA | User Manual - Page 20
    The appearance of the components and items sold separately may differ from the image shown. Components Quick Setup Guide Warranty Card (Not available in all locations) User Manual Power cable DC power adapter Stand base D-SUB cable DVI cable (optionally) DP cable (optionally) USB 3.0 cable
  • Samsung LS27A650DS/ZA | User Manual - Page 21
    1 Preparations 1.2 Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. SA650 SA850 Icons MENU Description z Open or close the onscreen display (OSD) menu, or return to the last menu. z OSD
  • Samsung LS27A650DS/ZA | User Manual - Page 22
    1 Preparations Icons ECO AUTO (Power Indicator) Description Configure Customized Key and press [ECO]. The following options will be enabled. ECO - MAGIC - Image Size To configure Customized Key, go to SETUP&RESET ª Customized Key and select the mode you want. Move to the upper or lower menu or
  • Samsung LS27A650DS/ZA | User Manual - Page 23
    DC 14V DP IN DVI IN 1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. SA650 SA850 23 1 Preparations RGB IN
  • Samsung LS27A650DS/ZA | User Manual - Page 24
    1 Preparations Port Description Connects to the DC power adapter. Connects to a PC via a DP cable. Connects to a PC via a DVI cable. Connects to a PC using the D-SUB cable. Connects to the stereo cable Connects to an audio output device such as headphones. Connect to a USB device. Compatible
  • Samsung LS27A650DS/ZA | User Manual - Page 25
    1 Preparations 1.3 Installation 1.3.1 Attaching the Stand Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Insert the stand base into the stand in the direction of the arrow. Do not remove the fixing pin until you
  • Samsung LS27A650DS/ZA | User Manual - Page 26
    1 Preparations 1.3.2 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. z To adjust the height, remove the fixing pin. z The monitor tilt and height can be adjusted. z Hold the top
  • Samsung LS27A650DS/ZA | User Manual - Page 27
    1 Preparations 1.3.4 Installing a Wall-mount Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Unfasten
  • Samsung LS27A650DS/ZA | User Manual - Page 28
    attaching the wall-mount kit or desktop stand using excessive force. z Samsung shall not be held liable for any product damage or personal injury shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device
  • Samsung LS27A650DS/ZA | User Manual - Page 29
    Installation] 1 Insert the user manual CD provided with the product into the CD-ROM drive. 2 Follow the instructions given on the screen to or 64 bits) 2 Compatible with a graphics card that complies with the DDC/CI and MS API standards With a graphics card that does not comply with the
  • Samsung LS27A650DS/ZA | User Manual - Page 30
    2 Connecting and Using a Source Device 2.1 Before Connecting 2.1.1 Pre-connection Checkpoints z Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. z Do not connect the power cable until
  • Samsung LS27A650DS/ZA | User Manual - Page 31
    2 Connecting and Using a Source Device 2.2 Connecting and Using a PC 2.2.1 Connecting to a PC z Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection using the D-SUB cable (analogue type) RGB IN 1 Connect the D-SUB cable to the [RGB IN] port
  • Samsung LS27A650DS/ZA | User Manual - Page 32
    power switch on the PC. (For details, refer to "2.5 Connecting the Power". ) 3 Press [ ] to change the input source to DisplayPort. If audio is supported, the Volume (VOL) can be adjusted using the [ product. (for the SA850 Model Only) ] buttons on the front of the 32 2 Connecting and Using
  • Samsung LS27A650DS/ZA | User Manual - Page 33
    z If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/sec) and download the file. 1 Insert the user manual CD provided with the product into the CD-ROM drive. 2 Click "Windows Driver". 3 Follow the instructions given on the screen to proceed with installation. 4 Select
  • Samsung LS27A650DS/ZA | User Manual - Page 34
    2 Connecting and Using a Source Device 2.2.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language and change the resolution to the optimum value. The optimal resolution for
  • Samsung LS27A650DS/ZA | User Manual - Page 35
    2 Connecting and Using a Source Device 2.2.4 Changing the Resolution Using a PC z Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. z The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on
  • Samsung LS27A650DS/ZA | User Manual - Page 36
    2 Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution. 36 2 Connecting and Using a Source Device
  • Samsung LS27A650DS/ZA | User Manual - Page 37
    2 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution. 37 2 Connecting and Using a Source Device
  • Samsung LS27A650DS/ZA | User Manual - Page 38
    2 Connecting and Using a Source Device 2.3 Connecting Headphones (for the SA850 Model Only) AUDIO IN 1 Connect the stereo cable to the [AUDIO IN] port on the back of the product and the AUDIO OUT port on the PC. If the stereo cable is connected, the Volume (VOL) can be adjusted using the [ front
  • Samsung LS27A650DS/ZA | User Manual - Page 39
    the back of the product and USB [ ] on the PC. A USB 2.0 cable can be used to connect the product to a PC. However, the PC should support USB 3.0 for the USB 3.0 function to work fully. 2.4.2 Utilizing the Product as a USB HUB Using the product as a hub, connect and use various source devices
  • Samsung LS27A650DS/ZA | User Manual - Page 40
    2 Connecting and Using a Source Device 2.5 Connecting the Power Put the DC power adapter in the groove, with the switch facing upward. - Push the adapter until you hear a "click." Connect the power cable to the DC power adapter. Next, connect the DC power adapter to the product. Plug in the power
  • Samsung LS27A650DS/ZA | User Manual - Page 41
    screen settings such as brightness and color tone. 3.1 MAGIC This feature provides the viewing angle, brightness, and tint to suit your preferences. 3.1.1 SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. This menu is
  • Samsung LS27A650DS/ZA | User Manual - Page 42
    product. 4 Press [ appear. ] to move to MSAAMSGUINCGColor and press [ ] on the product. The following screen will MAGIC SAMSUNG MAGIC Bright SAMSUNG MAGIC Color  Custom  Off Demo Full Intelligent Return Adjust AUTO Enter z Off: Disable MSAAMSGUINCGColor. z Demo: Compare normal screen
  • Samsung LS27A650DS/ZA | User Manual - Page 43
    3 Screen Setup 3.2 Brightness Adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. z This menu is not available when MSAAMSGUINCGBright is set to Dynamic Contrast mode. z This menu is not available when Eco Light Sensor or Eco Saving is
  • Samsung LS27A650DS/ZA | User Manual - Page 44
    3 Screen Setup 3.3 Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. z This menu is not available when MSAAMSGUINCGBright is in Cinema or Dynamic Contrast mode. z This menu is not available
  • Samsung LS27A650DS/ZA | User Manual - Page 45
    3 Screen Setup 3.4 Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. z This menu is not available when MSAAMSGUINCGBright is in Cinema or Dynamic Contrast mode. z This menu is not available when MSAAMSGUINCGColor is
  • Samsung LS27A650DS/ZA | User Manual - Page 46
    3 Screen Setup 3.5 Coarse Adjust the screen frequency. Only available in Analog mode. 3.5.1 Adjusting Coarse 1 Press [MENU] on the product. 2 Press [ ] to move to PICTURE and press [ 3 Press [ ] to move to Coarse and press [ ] on the product. ] on the product. The following screen will appear.
  • Samsung LS27A650DS/ZA | User Manual - Page 47
    3 Screen Setup 3.6 Fine Fine-adjust the screen to obtain a vivid picture. Only available in Analog mode. 3.6.1 Adjusting Fine 1 Press [MENU] on the product. 2 Press [ ] to move to PICTURE and press [ ] on the product. 3 Press [ ] to move to Fine and press [ ] on the product. The following
  • Samsung LS27A650DS/ZA | User Manual - Page 48
    3 Screen Setup 3.7 Response Time Accelerate the panel response rate to make video appear more vivid and natural. z It is best to set Response Time to Normal or Faster when you are not viewing a movie. z The functions available on the monitor may vary depending on the model. Refer to the actual
  • Samsung LS27A650DS/ZA | User Manual - Page 49
    4 Configuring Tint Adjust the tint of the screen. This menu is not available when MSAAMSGUINCGBright is set to Cinema or Dynamic Contrast mode. 4.1 Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This menu is not
  • Samsung LS27A650DS/ZA | User Manual - Page 50
    4 Configuring Tint 4.2 Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This menu is not available when MSAAMSGUINCGColor is in Full or Intelligent mode. 4.2.1 Configuring Green 1 Press [MENU] on the product. 2 Press
  • Samsung LS27A650DS/ZA | User Manual - Page 51
    4 Configuring Tint 4.3 Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This menu is not available when MSAAMSGUINCGColor is in Full or Intelligent mode. 4.3.1 Configuring Blue 1 Press [MENU] on the product. 2 Press
  • Samsung LS27A650DS/ZA | User Manual - Page 52
    4 Configuring Tint 4.4 Color Tone Adjust the general color tone of the picture. This menu is not available when MSAAMSGUINCGColor is in Full or Intelligent mode. 4.4.1 Configuring the Color Tone Settings 1 Press [MENU] on the product. 2 Press [ ] to move to COLOR and press [ 3 Press [ ] to move
  • Samsung LS27A650DS/ZA | User Manual - Page 53
    4 Configuring Tint 4.5 Gamma Adjust the mid-range brightness (Gamma) of the picture. 4.5.1 Configuring Gamma 1 Press [MENU] on the product. 2 Press [ ] to move to COLOR and press [ 3 Press [ ] to move to Gamma and press [ COLOR Red Green Blue Color Tone Gamma      ] on the product. ] on
  • Samsung LS27A650DS/ZA | User Manual - Page 54
    5 Resizing or Relocating the Screen 5.1 Image Size Change the picture size. 5.1.1 Changing the Picture Size 1 Press [MENU] on the product. 2 Press [ ] to move to SIZE&POSITION and press [ ] on the product. 3 Press [ ] to move to Image Size and press [ ] on the product. The following screen
  • Samsung LS27A650DS/ZA | User Manual - Page 55
    5 Resizing or Relocating the Screen 4 Press [ ] to move to the option you want and press the [ ]. 5 The selected option will be applied. 5.2 H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. z This menu is only available when Image
  • Samsung LS27A650DS/ZA | User Manual - Page 56
    5 Resizing or Relocating the Screen 5.3 Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.3.1 Configuring Menu H-Position or Menu V-Position 1 Press [MENU] on the product. 2 Press [ ] to move to
  • Samsung LS27A650DS/ZA | User Manual - Page 57
    6 Setup and Reset 6.1 ECO The Eco Motion Sensor, Eco Light Sensor, and Eco Saving options are displayed on the same menu page so that you can conveniently configure the power saving settings. 6.1.1 Eco Motion Sensor The Eco Motion Sensor activates to save power when it does not detect any
  • Samsung LS27A650DS/ZA | User Manual - Page 58
    6 Setup and Reset Configuring Backlight 1 Press [MENU] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the product. 3 Press [ ] to move to ECO and press [ ] on the product. 4 Press [ ] to move to Backlight and press [ ] on the product. The following screen will appear.
  • Samsung LS27A650DS/ZA | User Manual - Page 59
    6 Setup and Reset 6.1.2 Eco Light Sensor The Eco Saving feature optimizes the view condition and contributes to power saving by adjusting the screen brightness depending on the ambient light intensity. z This menu is not available when Eco Saving is set . z This menu is not available when
  • Samsung LS27A650DS/ZA | User Manual - Page 60
    6 Setup and Reset Configuring Sensitivity 1 Press [MENU] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the product. 3 Press [ ] to move to ECO and press [ ] on the product. 4 Press [ ] to move to Sensitivity and press [ ] on the product. The following screen will
  • Samsung LS27A650DS/ZA | User Manual - Page 61
    6 Setup and Reset Configuring Brightness Level 1 Press [MENU] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the product. 3 Press [ ] to move to ECO and press [ ] on the product. 4 Press [ ] to move to Brightness Level and press [ ] on the product. The following screen
  • Samsung LS27A650DS/ZA | User Manual - Page 62
    6 Setup and Reset 6.1.3 Eco Saving The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. z This menu is not available when Eco Light Sensor is set. z This menu is not available when MSAAMSGUINCGBright is in Dynamic Contrast mode.
  • Samsung LS27A650DS/ZA | User Manual - Page 63
     2Q 5HWXUQ 0RYH z Off: Disable the Eco Icon Display function. AUTO (QWHU z On: Display the operation status of the Eco sensor as a pop-up guide. 5 Press [ ] to move to the option you want and press the [ ]. 6 The selected option will be applied. Notes Eco Motion Sensor Activated w–žŒ™Gv
  • Samsung LS27A650DS/ZA | User Manual - Page 64
    6 Setup and Reset will decrease with a moon image displayed. The brightness slide bar will be displayed for 3 seconds after the sensor activates. You've saved * tree(s). z A pop-up as shown above will appear when an energy tree completes while Eco Icon Display is On. If the above picture is
  • Samsung LS27A650DS/ZA | User Manual - Page 65
    on the product. The following screen will appear. SETUP&RESET ECO ೛ Menu Transparency Language  OOffff  On PC/AV Mode  PC Auto Source  Manual Display Time  20 sec Key Repeat Time  Acceleration 4 Press [ Return Adjust AUTO Enter ] to move to the option you want and press the
  • Samsung LS27A650DS/ZA | User Manual - Page 66
    6 Setup and Reset 6.3 Language Set the menu language. z A change to the language setting will only be applied to the onscreen menu display. z It will not be applied to other functions on your PC. 6.3.1 Changing the Language 1 Press [MENU] on the product. 2 Press [ ] to move to SETUP&RESET and
  • Samsung LS27A650DS/ZA | User Manual - Page 67
    6 Setup and Reset 6.4 PC/AV Mode Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. PC/AV Mode is only available in Digital mode. 6.4.1 Configuring PC/AV Mode 1 Press [MENU] on the product. 2 Press [ ] to move to SETUP&RESET and press [ 3 Press
  • Samsung LS27A650DS/ZA | User Manual - Page 68
     On Language  English PC/AV Mode  PC Auto Source Display Time  Auto Manual  Key Repeat Time $FFHOHUDWLRQ Return Move AUTO Enter z Auto: The input source is automatically recognized. z Manual: Manually select an input source. 4 Press [ ] to move to the option you want and
  • Samsung LS27A650DS/ZA | User Manual - Page 69
    on the product. ] on the product. The following screen will SETUP&RESET ECO ೛ Menu Transparency  Off Language  On PC/AV Mode  English Auto Source  Manual Display Time Key Repeat Time  5 sec 10 sec 20 sec 200 sec 4 Press [ Return Move AUTO Enter ] to move to the option you want
  • Samsung LS27A650DS/ZA | User Manual - Page 70
    6 Setup and Reset 6.7 Key Repeat Time Control the response rate of a button when the button is pressed. 6.7.1 Configuring Key Repeat Time 1 Press [MENU] on the product. 2 Press [ ] to move to SETUP&RESET and press [ 3 Press [ ] to move to Key Repeat Time and press [ will appear. ] on the
  • Samsung LS27A650DS/ZA | User Manual - Page 71
    6 Setup and Reset 6.8 Customized Key You can customize Customized Key as follows. 6.8.1 Configuring Customized Key 1 Press [MENU] on the product. 2 Press [ ] to move to SETUP&RESET and press [ 3 Press [ ] to move to Customized Key and press [ appear. ] on the product. ] on the product. The
  • Samsung LS27A650DS/ZA | User Manual - Page 72
    6 Setup and Reset 6.9 Off Timer On/Off Enable or disable the off timer that automatically powers off the product. 6.9.1 Configuring Off Timer On/Off 1 Press [MENU] on the product. 2 Press [ ] to move to SETUP&RESET and press [ 3 Press [ ] to move to Off Timer On/Off and press [ appear. ] on the
  • Samsung LS27A650DS/ZA | User Manual - Page 73
    6 Setup and Reset 6.10 Off Timer Setting The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. This menu is only available when Off Timer On/Off is set to On. 6.10.1 Configuring Off Timer Setting 1 Press [MENU] on
  • Samsung LS27A650DS/ZA | User Manual - Page 74
    6 Setup and Reset 6.11 Reset Return all the settings for the product to the default factory settings. 6.11.1 Initializing Settings (Reset) 1 Press [MENU] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the product. 3 Press [ ] to move to Reset and press [ ] on the product
  • Samsung LS27A650DS/ZA | User Manual - Page 75
    7 INFORMATION Menu and Others 7.1 INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION 1 Press [MENU] on the product. 2 Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear. PICTURE COLOR SIZE&POSITION SETUP&
  • Samsung LS27A650DS/ZA | User Manual - Page 76
    Troubleshooting Guide 8.1 Requirements Before Contacting Samsung Customer Service Center 8.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service supported issue The power LED is off.
  • Samsung LS27A650DS/ZA | User Manual - Page 77
    Troubleshooting Guide Screen , referring to Standard Signal Mode Table (82page) in this manual and the INFORMATION menu on the product. The screen is too not really look white. There is no image on the screen and the power LED blinks every 0.5 to 1 second. Change the COLOR settings. (Refer to
  • Samsung LS27A650DS/ZA | User Manual - Page 78
    8 Troubleshooting Guide Source device issue A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced. 78 8 Troubleshooting Guide
  • Samsung LS27A650DS/ZA | User Manual - Page 79
    8 Troubleshooting Guide 8.2 Q & A Question How can I change the frequency? How can I change the resolution? How do I Personalize Screen Saver Settings or BIOS SETUP on the PC. Refer to the user manual for your PC or graphics card for further instructions on adjustment.. 79 8 Troubleshooting Guide
  • Samsung LS27A650DS/ZA | User Manual - Page 80
    9 Specifications 9.1 General Model Name S22A650D S24A650D S27A650D S24A850DW Panel Size 21.5 inches (54 24 inches (61 27 inches (68 24 inches (61 cm) cm) cm) cm) Display area 476.64 mm (H) x 268.11 mm (V) 531.36 mm (H) x 298.89 mm (V) 597.6 mm (H) x 336.15 mm (V) 518.4 mm (H) x 324
  • Samsung LS27A650DS/ZA | User Manual - Page 81
    To find the nearest recycling location, go to our website, www.samsung.com/recyclingdirect, or call (877) 278 - 0799 9.2 PowerSaver The reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power
  • Samsung LS27A650DS/ZA | User Manual - Page 82
    a PC) for an LCD monitor. If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT monitor before blank with the power LED on. In such a case, change the settings according to the following table by referring to the graphics card user manual. Resolution IBM, 640
  • Samsung LS27A650DS/ZA | User Manual - Page 83
    9 Specifications Resolution VESA, 1280 x 1024 VESA, 1280 x 1024 VESA, 1440 x 900 VESA, 1440 x 900 VESA, 1600 x 1200 VESA, 1680 x 1050 VESA, 1920 x 1080 VESA, 1920 x 1200 (SA850) Horizontal Frequency (kHz) 63.981 79.976 55.935 70.635 75.000 65.290 67.500 74.038 Vertical Frequency (Hz) 60.020 75.
  • Samsung LS27A650DS/ZA | User Manual - Page 84
    800-100-5303 http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www
  • Samsung LS27A650DS/ZA | User Manual - Page 85
    http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com 0700 Samsung (0700 726
  • Samsung LS27A650DS/ZA | User Manual - Page 86
    800-7267 444 77 11 http://www.samsung.com http://www.samsung.com http://www.samsung.com/ch http://www.samsung.com/ch_fr (French) http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com CIS 8-800-555-55-55 8-800-555
  • Samsung LS27A650DS/ZA | User Manual - Page 87
    .com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com AFRICA 0800 - SAMSUNG (726-7864) 0860-SAMSUNG (726-7864) http://www.samsung.com http://www.samsung.com 87
  • Samsung LS27A650DS/ZA | User Manual - Page 88
    Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
  • Samsung LS27A650DS/ZA | User Manual - Page 89
    frequency traverses obstacles more easily and can travel farther, but it transmits a smaller amount of data. The Coarse menu allows you to manually adjust the frequency to obtain the optimum picture quality. Adjust Coarse referring to Standard Signal Mode Table (82page) according to the performance
  • Samsung LS27A650DS/ZA | User Manual - Page 90
    Appendix Horizontal Frequency Characters or images displayed on the monitor screen consist of numerous dots (pixels). Pixels are transmitted in horizontal lines, which are then arranged vertically to create an image. The horizontal frequency is measured in kHz and represents how many times
  • Samsung LS27A650DS/ZA | User Manual - Page 91
    Index A Auto Source 68 B Before Connecting 30 Blue 51 Brightness 43 C Checking the Contents 19 Cleaning 4 Coarse 46 Color Tone 52 Configuring Brightness in the Startup Screen 75 Connecting and Using a PC 31 Connecting Headphones (for the SA850 Model Only) 38 Connecting the Product to a PC as a USB
  • Samsung LS27A650DS/ZA | User Manual - Page 92
    Index Requirements Before Contacting Samsung Customer Service Center 76 Reset 74 Response Time 48 S Safety Precautions 5 Sharpness 45 Size 54 Standard Signal Mode Table 82 T Terminology 89 Index 92
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

User Manual
SyncMaster
S22A650D
S24A650D
S27A650D
S24A850DW
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00081A-04