Samsung LTN406W User Manual (user Manual) (ver.1.0) (English)
Samsung LTN406W Manual
View all Samsung LTN406W manuals
Add to My Manuals
Save this manual to your list of manuals |
Samsung LTN406W manual content summary:
- Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 1
Owner's Instructions LCD TV with Life-Like Picture & Sleek Design LTN325W I LTN406W IMPORTADO POR SAMSUNG ELECTRONICS MEXICO. S.A. DE C.V. Via Lopez Portillo No. 6, Col. San Francisco Chilpan Tultitlan, Estado de Mexico C.P. 54940, Mexico D.F. Mexico Tel) 01(55) 5317-2551/3410/3409 - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 2
remain varied and as a result the borders may leave traces. Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn. • Digital Ready TV: When the TV receives HD-grade signals (and the set-top box output is 1080i). When you watch - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 3
signals (receives 480p regular signals). • Digital Ready TV (wide-screen): digital TV: When the TV receives SD-grade (regular) broadcasting signals (with a set-top box). • When you watch an analog (regular) broadcast on a wide-screen TV (with the 4:3 screen mode selected). • When you watch a DVD, CD - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 4
accordance with the manufacturer's instructions. 8) Do not install outlet, consult an electrician for replacement of the obsolete outlet. 10) ) Use only with cart, stand, tripod, bracket, or table specified by the 14) Refer all servicing to qualified service personnel. Servicing is required when - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 5
). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This 40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part recording of copyrighted TV programs is an infringement ENERGY STAR Partner. Samsung Electronics America, Inc. has - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 6
booklet called How to Identify and Resolve Radio/TV Interference Problems helpful. This booklet was prepared by the Federal it may cause radio interference. Install and use the equipment according to the instruction manual. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 7
the different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as other burned-in images, is not covered by your Samsung limited warranty. [Note] If a still image is - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 8
MEMO - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 9
CONTENTS Chapter 1: Your New TV 1 List of Features 1 List of Parts 1 Familiarizing Yourself with Your New TV 2 Front Panel Buttons 2 Rear Panel Jacks 3 Remote Control 4 Installing Batteries in the Remote Control 6 Chapter 2: Installation 7 Connecting VHF and UHF Antennas 7 Antennas with - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 10
Initialize the Screen Settings 63 How to DVI Select 64 How to Auto Adjust 65 Chapter 6: Troubleshooting 66 Identifying Problems 66 Appendix 68 Installing Stand 68 Using the Anti-Theft Kensington Lock 69 How to Install the Wall Bracket 70 Pin Assignments 72 Specifications 73 Display Modes - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 11
List of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. Remote Control(BN59-00364B) & Batteries (AAA x 2) RF Cable (AA39-00039A) Power Cord (BH39-10339X) Owner's Instructions Front Speaker (BN96-00568C) Stand (BN96-00380A - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 12
features, including the on-screen menu. To use the more advanced features, you must use the remote control. POWER Press to turn the TV on and off. POWER INDICATOR Lights up when you turn the power off. REMOTE CONTROL SENSOR Aim the remote control towards this spot on the TV. TV/VIDEO (See Page 17 - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 13
YOUR NEW TV Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continuously, VIDEO INPUT HEADPHONE JACK COMPONENT DIGITAL AUDIO IN JACK PC AUDIO INPUT PC VIDEO(DVI-D) INPUT SPEAKER OUT JACK WOOFER OUTPUT TV ANTENNA KENSINGTON LOCK POWER INPUT English-3 - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 14
all of the available video sources. (See Page 25-26) JOYSTICK Use to select on-screen menu items and change menu values. (The remote control will only function with VCR or DVD units that are compatible with the LCD TV.) VIDEO/DVD CONTROL BUTTON Use this button to control the video or DVD functions - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 15
. (See Page 40) PC Press to switch to the PC mode. SET BUTTON PRE-CH Tunes to the previous channel. (See Page 16) INFO Press to display the current channel and audio/video settings. (See Page 17) EXIT Press to exit the menu. PIP See the PIP screen section of this manual. (See - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 16
with the diagram inside the compartment. 3 Replace the cover. Remove the batteries and store them in a cool, dry place if you won't be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 17
wires from the twin leads under the screws on a 30075 ohm adaptor (not supplied). Use a screwdriver to tighten the screws. 2 Plug the adaptor into the TV ANTENNA terminal on the bottom of the back panel. English-7 - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 18
terminal on the bottom of the rear panel. Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1 Plug the incoming cable into the TV ANTENNA terminal on back of the TV. Because this TV is cable-ready, you do not need a cable box to - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 19
". 2 Connect the other end of this cable to the TV ANTENNA terminal on the back of the TV. Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 20
RF (A/B) switch. 6 Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV. After you've made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to view scrambled - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 21
stereo, you must connect two cables. 5 Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV. Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. # Each external input source device has a different back panel configuration. English - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 22
S TA L L AT I O N Connecting an S-VHS VCR Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This an External Input Source Connect the Input/AUDIO cables to the Input/AUDIO OUT jacks on the TV and the Input/AUDIO IN jacks on the VCR (Connect the cables to the jacks of the - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 23
Pr jacks on the DVD player. Note: For an explanation of Component video, see your DVD player owner's manual. # Each external input source device has a different back panel configuration. Connecting a Digital TV Set-Top Box The connections for a typical set-top box are shown below. 1 Connect a set of - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 24
. How to Connect 1. Place the hooks on the speaker and the TV set. 2. Tighten the screws to secure the hooks. 1. Connect the speaker cables to the Speaker OUT jacks on the TV and the IN jacks on the speakers. 2. Connect the Subwoofer OUT jack on the TV to the Subwoofer. How to Turn the Sound On - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 25
I O N Connecting a PC Note: This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model. DVI-D TV rear panel PC rear D-SUB TV rear panel PC VIDEO CABLE ( DVI-D+DVI-D ) PC AUDIO CABLE PC rear PC VIDEO CABLE ( DVI + D-SUB - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 26
time related settings. [Benefit] This full 'power off' function is as effective as unplugging the power cable. TV switches to stand-by mode when powered off by the remote control. To return power ( ) to the screen, press the remote control 'ON' or channel button ( ). Pressing the power button on the - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 27
and the status of certain audio-video settings. 1 Press the Display button on the remote control. The TV will display the channel, the type of sound, and the status of certain picture and sound settings. The on-screen displays disappear after about ten seconds. Press the button once more or wait - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 28
make sure that the VCR LED is illuminated. 3 Press the Set button on your TV's remote control. 4 Using the number buttons on your remote control, enter three digits of the VCR code listed on page 21 of this manual for your brand of VCR. Make sure you enter three digits of the code, even - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 29
make sure that the Cable LED is illuminated. 3 Press the SET button on your TV's remote control. 4 Using the number buttons on your remote control, enter three digits of the cable box code listed on page 21 of this manual for your brand of cable box. Make sure you enter three digits of the - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 30
make sure that the DVD LED is illuminated. 3 Press the SET button on your TV's remote control. 4Using the number buttons on your remote control, enter three digits of the DVD code listed on page 21 of this manual for your brand of DVD. Make sure you enter three digits of the code, even - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 31
Remote Control Codes VCR Codes Admiral 015,088 KLH 082 RCA 009,014,016,017,037,044,046,063,078 Aiwa 024 LG 001,002,007 Samsung 000,016,022,031, Amex 052 Magnavox 015,016,027,029,034,036,037,040,041,048,049 Samsung 000,011,030,052,071,072 Zenith 022,050,065,069 DVD Codes Philips - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 32
settings proceed automatically and subsequently: Setting Auto program, Clock. 1 Press the POWER button on the remote control. The message "Plug & Play" is displayed. 2 Press the ENTER button. The TV will begin memorizing all of the available channels. 3 Press the LEFT/RIGHT buttons to move to - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 33
the channels (automatic) and adding and deleting channels (manual). Selecting the Video Signal-source Before your television can to cycle through these choices: Air (antenna), STD, HRC or IRC (all cable TV). Press the UP/DOWN buttons to select the Video signal source, then press the ENTER - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 34
stored, the Auto program menu reappears. Press the MENU button to exit. To select channels over 100, Ex) Press ➔ ➔ to select cable channel 108. The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes. Press ENTER at any time - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 35
R AT I O N Adding and Erasing Channels (Manual Method) 1 Use the number buttons to directly select the remote control. To Select TV/Input Use to select TV or other external input source connected to the TV. Use to select the screen of your choice. 1 Press the MENU button to display the on-screen - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 36
Name Name the input device connected to the input jacks to make your input source selection easier. 1 Press the MENU button to display the on-screen menu. Press the UP/DOWN buttons to select "Input", then press the ENTER button. Press the UP/DOWN buttons to select "Edit Name", then press - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 37
E R AT I O N Using Automatic Picture Settings Your TV has four automatic picture settings ("Custom", "Dynamic", "Standard Press MENU twice to exit. Alternate method: Simply press the P.MODE button on the remote control to select one of the standard picture settings. • Choose Dynamic to increase the - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 38
O P E R AT I O N Customizing the Picture You can use the on-screen menus to change the contrast, brightness, sharpness, color and tint according to personal preference. (Alternatively, you can use one of the "automatic" settings. See the - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 39
O P E R AT I O N Using Automatic Sound Settings Your TV has five automatic sound settings ("Custom", "Standard", "Music", "Movie" and "Speech") that are preset at the factory. You can select "Sound Mode", which automatically recalls - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 40
O P E R AT I O N Customizing the Sound The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the "automatic" settings. See the previous page.) 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select "Sound", then press the - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 41
O P E R AT I O N Selecting a Menu Language 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select "Setup", then press the ENTER button. 2 Press the UP/DOWN buttons to select Language. Press the ENTER button. 3 Press the UP/DOWN buttons to select "English", "Français", "Espa - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 42
Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue screen" mode to "Off". 1 Press the MENU button to display the menu. Press the UP/DOWN buttons - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 43
I O N To Select an External Output Device You can select one from TV, Input1 (Component1), Input2 (Component2), and S-Video to send the signals to the signals coming from the source of your choice. • If the output is set to TV and the PIP window function is on, you can select the audio from the PIP - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 44
O P E R AT I O N LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1 Press the MENU button - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 45
O P E R AT I O N Fine Tuning Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Select the appropriate channel. 2 Press the MENU button to display the menu. Press the UP/DOWN buttons to select " - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 46
button. 2 Press the ENTER to select PIP "On". button Quick way to access the PIP menu: Simply press the PIP button on the remote control. If you turn the TV off while watching and turn it on again, the PIP window will disappear. 3 Press the MENU button to exit. Note: Picture-in - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 47
a smaller and larger PIP window. • You cannot select the PIP window function when the TV set is in energy saving mode. You will see the "Check the cable connection" or "Out of input range" message on the screen in PC mode. • Press the button once more to deselect PIP mode. • You may - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 48
. (However, it does not work in 720p and 1080i modes.) • Zoom 1,2 : Magnifies the size of the picture on screen. • 4:3 : Sets the picture to 4:3 normal mode. This is the standard TV screen size. Freezing the Picture 1 Press the STILL button to freeze a moving picture. • Not available if V-Chip is - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 49
O P E R AT I O N Adjusting the Background Color You can change the color of the entire screen according to your preference. 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select "Picture", then press the ENTER button. 2 - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 50
P E R AT I O N Setting the DNIe Samsung's New Technology brings you more detailed images with contrast, the UP/DOWN buttons to select DNIe items. Press the MENU button to exit. • DNIe Demo: The screen shows the improved image on the left-hand side and the original image on the right-hand side. • - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 51
UP/DOWN buttons to select "ON", then press the ENTER button. Press the MENU button to exit. • Turn the Dolby ProLogic II on while the TV is receiving mono or stereo signals to enjoy the 5.1-channel Dolby surround sound. English-41 - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 52
O P E R AT I O N To Enjoy Dolby Digital Sound Turning the Dynamic Range On 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select "Sound", then press the ENTER button. 2 Press the UP/DOWN buttons to select "Dolby Digital", then press the ENTER button. 3 Press the UP/DOWN - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 53
press the ENTER button. 2 Press the UP/DOWN buttons to select "Dolby Digital", then press the ENTER button. 3 Press the UP/DOWN buttons to select "Speaker Setting", then press the ENTER button. 4 Press the UP/DOWN buttons to select "Front Left", then press the ENTER button. Press the MENU button to - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 54
. Press the MENU button to exit. • You can choose On/Off for a test. The output levels of the left and right front speakers, the center speaker and the left and right rear speakers are adjustable within the range of -10 ~ +10dB. • Use to adjust the connection settings and output levels for each - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 55
to exit. • For the best quality 5.1-channel surround sound reproduction, place the speakers so that the distance between the speakers and the distance between you and the speakers are the same. The sound coming out of the speakers does not reach the listener at the same time; the timing varies - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 56
the TV set. Rear Speakers Place the speakers behind the listener at a certain distance away so that they are placed 23.6 inch - 35.4 inch higher than the listener's ears and face downwards. If you do not have enough space in the room and have to sit with your back close to the wall, place - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 57
O P E R AT I O N Changing the STEREO Settings If you live in an area that has poor reception (due to weak frequency), you may hear noise and experience poor sound quality during the channel selection. Set the stereo setting to Off to eliminate the noise. Select Off and set the MTS setting to Mono. 1 - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 58
/DOWN buttons to select "Sound Select". Press the ENTER button. 3 Press the ENTER button to select "Main" or "Sub". Select "Main" to hear the main TV sound and select "Sub" to hear the PIP window sound. Press the MENU button to exit. Note : Sound Select can also be used to select - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 59
O P E R AT I O N To Select an External Input Device 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select "Sound", then press the ENTER button. 2 Press the UP/DOWN buttons to select "Ext.Audio", then press the ENTER button. 3 Press the UP/DOWN buttons to select "Optical" - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 60
Headphone Sound The headphone option is especially useful when simultaneously watching the main screen and the PIP window. Note: When TV is connected with "Digital Audio In" (refer to page 3), you cannot listen to TV with headphones. 1 Press the MENU button to display the menu. Note : Headphones - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 61
in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press DISPLAY.) 1 Press the MENU button to display the on-screen menu. Press the UP/DOWN buttons to select " : You can also set the time using the numeric buttons on the remote. English-51 - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 62
the On/Off Timer 1 Press the MENU button to display the on-screen menu. Press the UP/DOWN buttons to select "Setup", then press the then press the ENTER button to select "Clock". Before using the timer, you must set the TV's clock. (See "Setting the Clock" on page 51) 3 Press the UP/DOWN buttons to - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 63
you set the timer on, your television will be turned off if you do not operate any controls during 3 hours after you turn on the TV. This 'Absent power off' function is available in only 'Timer on' situation. This function will prevent the leakage accident or dissipation caused by the occation - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 64
Set the timer for the TV to turn off at the preset time automatically. Setting the On/Off Timer Using the Menu 1 Press the MENU button to display the on-screen menu. Press the UP/DOWN the button on the remote. The number on the screen changes from Off • 30 • 60 • 90 • 120 • 150 • 180. English - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 65
: The default Pin number for a new TV set is "0-0-0-0." 3 After entering a valid Pin number, the "V-Chip" screen will appear. Press the UP/DOWN buttons Change Pin screen will appear. Choose any 4-digits for your Pin and enter them. ➜ Note: If you forget the Pin, press the remote-control buttons - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 66
. 3 The "V-Chip" screen will appear, and "V-Chip lock" will be selected. To enable the V-Chip feature, press the UP/DOWN buttons so that the "V-Chip Lock" is set to Yes. (Pressing the UP/DOWN buttons will alternate between On and Off.) How to Set up Restrictions Using the 'TV guidelines' First, set - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 67
ENTER( )button to block or unblock the category. A TV-Rating will be highlighted. To exit this screen, press the MENU again. To select a different TV-Rating, press the UP/DOWN buttons and then repeat the process. Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 68
that are "More restrictive". For example, if you block "L" sub-rating in TV-PG, then the "L" sub-ratings in TV-14 and TV-MA will automatically be blocked. 7 Press the MENU button three times to clear all the screens. (Or proceed to the next section, and set up additional restrictions based on - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 69
"R," "NC-17," and "X"will automatically be blocked also. How to Reset the TV after the V-Chip Blocks a Channel ("Emergency Escape") If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: "Excessive rating". To resume - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 70
screens look different, the same, basic set-up information will apply in most cases. (If not, contact your computer manufacturer or Samsung TV-PC interface are "resolution" and "colors." The correct settings for these two variables are: * Size (sometimes called "resolution"): 1280 x 768 pixels - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 71
the picture so that it is aligned on the center of screen. Press the PC button on the remote control to select the PC mode. 1 Press the MENU "Coarse" or "Fine". 4 Press the LEFT/RIGHT buttons to adjust the screen quality, vertical stripes appear or the picture may be blurry. - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 72
PC DISPLAY Changing the Screen Position Press the PC button on the remote control to select the PC mode. 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select "Setup", then press the - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 73
PC DISPLAY To Initialize the Screen Settings Use to return the screen settings to the default values. 1 Press the MENU button to display the menu. Press the UP/DOWN button to select "Setup", then press the ENTER - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 74
-Disital Even if the cables are connected properly, you may have selected the wrong DVI signal if you do not see the banner on the screen. Choose the right DVI signal for your computer. English-64 - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 75
PC DISPLAY How to Auto Adjust Use the Auto Adjust function to have the TV set automatically adjust the video signals the monitor receives. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. 1 Press - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 76
Chapter Six TROUBLESHOOTING If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Identifying Problems Problem Poor picture Poor sound quality. No picture or sound. No sound - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 77
TROUBLESHOOTING Problem Possible Solution "Not Supported Mode!" Check the maximum resolution change the display settings. NOTE: Your TV supports multiscan display functions within the following . screen. The TFT LCD panel uses a panel consisting of sub pixels (LTN325W - 2,949,120 / LTN406W - - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 78
the four screws to tightly fix the stand. Maintenance of Your LCD TV WARNING: To avoid risk of electric shock, do not disassemble the TV cabinet (except for gaining access to the cable connectors as described on Chapter 2). Users cannot service the TV. User maintenance is restricted to cleaning as - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 79
may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use. 1 Insert the locking device into the Kensington slot on the LCD TV(Figure 1), and turn it in the locking direction(Figure 2). 2 Connect the Kensington lock - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 80
in the direction of the arrow and tighten the captive screws. 1. Attach the LCD TV onto the wall bracket. (Follow the instructions below.) 2. Pull the upper part of the LCD TV fixed to the bracket forward in the direction of the arrow and adjust the angle. 3. You can adjust the angle to your - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 81
tightly to the wall. 4 Put the four holders on the back of the TV into the holes on the wall bracket, (1) lower the TV, and (2) hang the TV on the bracket. Fasten the TV securely to the wall bracket with stickscrews as in (3) so that the two will not separate. LCD TV Wall Wall bracket English-71 - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 82
Pin Assignments Pin DVI Connection Cleaning and Maintaining Your TV With proper care, your TV unit will give you many years of service. Please follow these guidelines to get the maximum performance from your TV. Placement • Do not place the TV near extremely hot, cold, humid or dusty places. • Do - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 83
APPENDIX Specifications Model Name LTN325W LTN406W Panel *Frequency Display Resolution Size Display Size Pixel Pitch Type Viewing Angle Horizontal Vertical Display Color 32.0 inch Diagonal 27.06(H) X 16.23(V)inch (687.36(H) X 412.42(V)mm) 0.021(H) X 0.021(V)inch (0.537(H) X 0.537(V)mm) 40.0 - Samsung LTN406W | User Manual (user Manual) (ver.1.0) (English) - Page 84
guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacture. Mode MAC IBM VESA GTF Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel 31.500 -/- 800X600 37.879 60.317 40.000 + / + 800X600 48.077 72
BN68-00448R-05
This device is a Class B digital apparatus.
Owner’s Instructions
LCD TV with Life-Like Picture & Sleek Design
LTN325W I LTN406W
IMPORTADO POR
SAMSUNG ELECTRONICS MEXICO. S.A. DE C.V.
Via Lopez Portillo No. 6, Col. San Francisco
Chilpan Tultitlan, Estado de Mexico C.P. 54940, Mexico
D.F. Mexico
Tel) 01(55) 5317-2551/3410/3409
Fax) 01(55) 5317-3377
EXPORTADO POR
Samsung Electronics Co., Ltd.
416, Maetan-3dong, Yeongtong-Gu,
Suwon City, Kyungki-Do Korea