Samsung MM-D470D User Manual (user Manual) (ver.1.0) (English) - Page 31
Setting the Clock, Timer Function
View all Samsung MM-D470D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
04 Basic Functions Setting the Clock Timer Function For each step, you have a few seconds to set the required option. If you exceed this time, you must start again. 1. Switch the system on by pressing the POWER button. 2. Press and hold the TIMER/CLOCK button and then press the ENTER button. Result: "CLOCK" is displayed. 3. Press ENTER. Result: The hour flashes. Decrease the hours: ◄ Increase the hours: ► 4. When the correct hour is displayed, press ENTER. Result: The minutes flashes. Decrease the minutes: ◄ Increase the minutes: ► 5. When the correct minute is displayed, press ENTER. Result: " TIME" appears in the display. The current time is now set. ✎ NOTE You can display the time, even when you are using another function, by pressing and holding the TIMER/CLOCK button once. You can also use # or $ on the front panel instead of buttons in steps 3 and 4. The timer enables you to switch the system on or off at specific times automatically. Before setting the timer, check that the current time is correct. For each step, you have a few seconds to set the required option. If you exceed this time, you must start again. If you no longer want the system to be switched on or off automatically, you must cancel the timer. Example: You wish to wake up to music every morning. 1. Switch the system on by pressing the POWER button. 2. Press and hold the TIMER/CLOCK button and then press ◄ or ► buttons until TIME is displayed. 3. Press the ENTER ( ) button. Result: ON is displayed for a few seconds. You can set the timer switch-on time. 4. Set the timer switch-on time. a Press the ◄ or ► button. b Press the ENTER ( ) button. Result: The minutes flash. c Press the ◄ or ► button. d Press the ENTER ( ) button. Result: OFF is displayed for a few seconds. You can now set the timer switch-off time. 5. Set the timer switch-off time. a Press the ◄ or ► button. b Press the ENTER ( ) button. Result: The minutes flash. c Press the ◄ or ► button. d Press the ENTER ( ) button. Result: VOL XX is displayed, where XX corresponds to the volume already set. 6. Press ◄ or ► button to adjust the volume level and press the ENTER ( ) button. Result: The source to be selected is displayed. 7. Press the ◄ or ► button to select the desired source to be played when the system switches on. FM (radio) : a Press the ENTER ( ) button. b Select a preset station by pressing the ◄ or ► button. DVD/CD (compact disc): Load one compact disc. USB : Connect the USB device. 31 English