Samsung NX100 User Manual
Samsung NX100 Manual
 |
UPC - 044701014645
View all Samsung NX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Samsung NX100 manual content summary:
- Samsung NX100 | User Manual - Page 1
#Xsjudgh#jxlgh +Yhu1#34133, 1. Before upgrading the firmware ● Make sure you use fully charged batteries. If camera malfunction is caused during a firmware upgrade for the reasons given above, the mainboard may have to be serviced by a Samsung service centre, which may result in major repair charges - Samsung NX100 | User Manual - Page 2
for 1 time.) 8) The upgrading progress bar will be increased, then after finishing it, camera will turn off ※ Should you need further detailed information, or if you experience difficulty in upgrading firmware, do not proceed with the process on your own. Visit a Samsung service centre near you.
-
1 -
2
 |
 |
Q[433 Ilupzduh Xsjudgh jxlgh +Yhu1 34133,
1. Before upgrading the firmware
● Make sure you use fully charged batteries.
If camera malfunction is caused during a firmware upgrade for the reasons given above, the mainboard
may have to be serviced by a Samsung service centre, which may result in major repair charges.
● Before upgrading the firmware, make sure that you format the memory card on your PC or camera and
then download the necessary firmware file.
● Download the firmware file into the root directory of the memory card.
● Do not operate the camera, remove the batteries, or cut the power while upgrading firmware. Operate the
camera only after the firmware upgrade is complete.
2. How to upgrade firmware?
1) Download the firmware file into the root directory of the SD memory card.
2) Insert the SD card on which the firmware file is to be saved.
3) Press the menu button.
4) Move to "Setup Menu 3" (Press the left button of 4-wat key.)
5) Select the "Firmware Update"
(After pressing the left button of 4-way key, press the OK button for 1 time.)
6) Select the "Body Firmware". (Press the OK button for 1 time)