Samsung P63F User Guide

Samsung P63F - 63" Plasma Panel Manual

Get Samsung P63F - 63inch Plasma Panel PDF manuals and user guides
UPC - 729507804989
View all Samsung P63F manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung P63F manual content summary:

  • Samsung P63F | User Guide - Page 1
    SEC-VD-DSW Multiple Display Control - 0008 Ver. 2.1 2008-06-26 Multiple Display Control Protocol for SyncMaster 42TS/42PS P50Hn P50F(n) P63F(n) 320MX(n) 400CX(n) 400MX(n) 460CX(n) Copyright © 2003 2008 Samsung Electronics Co., Ltd
  • Samsung P63F | User Guide - Page 2
    Address : 416, Maetan-3Dong, Paldal-Gu, Suwon City, Kyungki-Do, Korea 442-742 Telephone : 82-31-277-2764 E-mail : [email protected] Prepared by : Display S/W, Video Display Division. Status : Prepared Subject : Technical Writer, Programmer, Developer Outline : Protocol type document of Multiple
  • Samsung P63F | User Guide - Page 3
    SEC-VD-DSW External Control - 0008 1.9 2006. 12. 18 Add Commands ( New Video Wall ) Version 2.0 2.1 Date 2007. 04. 17. 2008. 06. 26. Content Add Commands Add Commands H. Park Prepared by H. Park J. Choi Compared by Display S/W, VD Business Team, Samsung Electronics 2
  • Samsung P63F | User Guide - Page 4
    to be connected from RS232-Out (9Pin). - In doing so, each TV or Monitor ID can be given from 0 to 99. - ID cannot be given duplicated. - does not need to be given out in the connecting order. Figure1-1 PC,TV or Monitor connecting method UART LCD 1 UART LCD 2 UART LCD 3 UART LCD 4 IN OUT IN
  • Samsung P63F | User Guide - Page 5
    SEC-VD-DSW External Control - 0008 1.2. Connection Spec. 1) Connection Spec. - Interactive communications using RS232. - Of RS232 standards it will not respond with ACK. Table 2-1 RS232 Network spec Bits Rate Data Bits Parity Stop Bits Flow Control 9600 bps 8 bits None 1 bit None
  • Samsung P63F | User Guide - Page 6
    SEC-VD-DSW External Control - 0008 Figure 2-1 RS-232 pin out DB-9 pin used for Asynchronous Data Display S/W, VD Business Team, Samsung Electronics 5
  • Samsung P63F | User Guide - Page 7
    0x1B 0x1C 0x24 0x25 0x26 0x27 0x28 0x29 Value Range 0~1 0 ~ 100 0~1 0 ~ 255 0 ~ 100 0 ~ 100 0 ~ 100 0 ~ 100 0 ~ 100 0 ~ 100 0 ~ 100 0 ~ 100 0 ~ 100 Display S/W, VD Business Team, Samsung Electronics 6
  • Samsung P63F | User Guide - Page 8
    Wall Control 54 Auto Lamp Control 55 Manual Lamp Control 56 Safety Screen Run Control 61 OSD On/OFF 62 P. Mode Control 63 S. Mode Control 64 NR Mode Set 65 100 0~1 0 0~4 0 ~ 10 0~1 0~4 0~1 0 ~ 100 0~6 0~1 0~1 0~1 0~1 0~4 0~1 0~3 Display S/W, VD Business Team, Samsung Electronics 7
  • Samsung P63F | User Guide - Page 9
    Control 76 Brightness Sensor 77 Dynamic Contrast 78 Safety Screen On 79 Video Wall User Control 80 Model Name 0x76 0x77 0x78 0x79 0x7A 0x7E 0x7F 0x83 0x84 0x85 items-refer to "2.1. Command Detailed Explanation" for more details. Display S/W, VD Business Team, Samsung Electronics 8
  • Samsung P63F | User Guide - Page 10
    : OffTime ON/OFF value of time to set TV/Monitor Val 2 Volume ● Nak Header Command Data Length Ack/Nak ID 0xAA 0xFF 3 'N' ERR : Error code that shows what occurred error is 0 Check Sum Error 1 etc. r-CMD 0x00 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 9
  • Samsung P63F | User Guide - Page 11
    time of TV / Monitor. ● Get Time Status Monitor 1 AM 0 PM H Time : Hour value ( 1 ~ 12 ) to be set on TV/Monitor M Time : Minute value ( 0 ~ 59 ) to be set on TV/Monitor H Time, M Time if current time was not set on Monitor, 0xFF ● Nak Header Command Data Length Ack/Nak ID 0xAA 0xFF
  • Samsung P63F | User Guide - Page 12
    that TV / Monitor turns on. Monitor 1 AM 0 PM N H Time : On Time Hour value ( 1 ~ 12 ) to be set on TV/Monitor N M Time : On Time Minute value ( 0 ~ 59 ) to be set on TV/Monitor H Time, N M Time if On Time was not set on Monitor, 0xFF ● Nak Header Command Data Length Ack/Nak ID 0xAA 0xFF
  • Samsung P63F | User Guide - Page 13
    External Control - 0008 * Off Time Control ● Function Personal Computer controls the time that TV / Monitor turns off. ● Get Off Time Status Header Command 0xAA 0x03 ID Data Length Check 0 Sum ● is r-CMD 0x03 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 12
  • Samsung P63F | User Guide - Page 14
    AV, S-Video, Component, HDMI Only) ● Function Personal Computer shows the screen condition of TV / Monitor. ● Get Video Status Header Command 0xAA 0x04 ID Data Length Check 0 Sum ● Ack Header Command r-CMD 0x04 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 13
  • Samsung P63F | User Guide - Page 15
    External Control - 0008 * Audio Control ● Function Personal Computer shows the sounds condition of TV / Monitor. ● Get Audio Status Header Command 0xAA 0x05 ID Data Length Check 0 Sum ● Ack Header is r-CMD 0x05 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 14
  • Samsung P63F | User Guide - Page 16
    * RGB Control (PC, BNC, DVI Only) ● Function Personal Computer shows screen condition of TV / Monitor. ● Get Video Status Header Command 0xAA 0x06 ID Data Length Check 0 Sum ● Ack Header Command Data r-CMD 0x06 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 15
  • Samsung P63F | User Guide - Page 17
    Computer shows PIP setting state of TV / Monitor. ● Get PIP Status Header Command 0xAA P.Size : PIP Size value code set at TV / Monitor 0x00 0x06 0x08 0x04 0x05 0x09 PIP Off Large Small Double 1 P.Source : PIP Source value code set at TV / Monitor Val 1 P.Size Val 2 P.Source ● Nak Header
  • Samsung P63F | User Guide - Page 18
    Lamp Min Time Hour (1 ~ 12) set on TV / Monitor LMin_M : Auto Lamp Min Time Minute (0 ~ 59) set on TV / Monitor LMin_AP : Auto Lamp Min Time AM/PM set on TV / Monitor LMinValue : Auto Lamp Min value (0 ~ 100, 0xFF) set on TV / Monitor LampValue : Manual Lamp Control value (0 ~ 100, 0xFF) set on TV
  • Samsung P63F | User Guide - Page 19
    Control ● Function Personal Computer controls serial number of TV / Monitor. ● Get SerialNum Status Header Command 0xAA 0x0B ID Data Length Val 14 Data14 Check Sum Data1 ~ Data14 : Serial Number set on TV / Monitor. ● Nak Header Command Data Length Ack/Nak ID 0xAA 0xFF 3 'N' ERR :
  • Samsung P63F | User Guide - Page 20
    of TV / Monitor FAN : Fan Error code (0 : Normal, 1 : Error) to be set on TV / Monitor ● Nak Header Command 0xAA 0xFF ID Data Length Ack/Nak r-CMD 3 'N' 0x0D Val 1 ERR Check Sum ERR : Error code that shows what occurred error is Display S/W, VD Business Team, Samsung Electronics 19
  • Samsung P63F | User Guide - Page 21
    Version Control ● Function Personal Computer shows version information of TV / Monitor. ● Get Version Status Header Command 0xAA 0x0E ID Data Length Check ~ Version11 : Project Info. of TV/Monitor Version12 ~ Version15 : Software version of TV/Monitor Check Sum ● Nak Header Command Data
  • Samsung P63F | User Guide - Page 22
    (n) SyncMaster 820DX(n) SyncMaster 460TX(n) SyncMaster 400UX(n) SyncMaster 460UX(n) SyncMaster 42TS/42PS SyncMaster P50Hn SyncMaster P50F/P50Fn SyncMaster P63F/P63Fn SyncMaster 320MX/320MXn SyncMaster 400CX/400CXn SyncMaster 400MX/400MXn SyncMaster 460CX/460CXn TV : TV support of TV / Monitor 0x00
  • Samsung P63F | User Guide - Page 23
    SEC-VD-DSW External Control - 0008 ● Nak Header Command Data Length Ack/Nak 0xAA 0xFF ID 3 'N' ERR : Error code that shows what occurred error is r-CMD 0x10 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 22
  • Samsung P63F | User Guide - Page 24
    Header Command Data Length Data 1 ID 0xAA 0x11 1 Power Power : Power code to be set on TV / Monitor 1 Power ON 0 Power OFF Check Sum ● Ack Header Command ID 0xAA 0xFF Power : Same as above Data r-CMD 0x11 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 23
  • Samsung P63F | User Guide - Page 25
    0xAA 0x12 ID Data Length Data 1 1 Volume Check Sum Volume : Volume value code to be set on TV/Monitor (0 ~ 100 ) ● Ack Header Command ID 0xAA 0xFF Volume : Same as above Data Length Ack/Nak r-CMD is r-CMD 0x12 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 24
  • Samsung P63F | User Guide - Page 26
    OFF Header Command Data Length Data 1 ID 0xAA 0x13 1 Mute Mute : Mute code to be set on TV / Monitor 1 Mute ON 0 Mute OFF Check Sum ● Ack Header Command ID 0xAA 0xFF Mute : Same as above Data CMD 0x13 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 25
  • Samsung P63F | User Guide - Page 27
    Check 0 Sum ● Set Input Source Header Command 0xAA 0x14 ID Data Length Data 1 1 Input Check Sum Input : Input Source code to be set on TV / Monitor 0x14 0x1E 0x18 0x0C 0x04 0x08 0x20 0x1F 0x30 0x40 0x21 0x22 PC BNC DVI AV S-Video Component MagicNet DVI_VIDEO RF(TV) DTV HDMI HDMI_PC
  • Samsung P63F | User Guide - Page 28
    1 Aspect Check Sum Aspect : Picture Size ㅊode to be set on TV / Monitor PC1, PC2, DVI, BNC 0x10 16 : 9 0x18 4:3 AV, S-VIdeo, Component Zoom 0x0B 4:3 0x0C Wide Fit Caution :For some Image, sizes are not supported depending on some input signals (720p, 1080i). For MFM model only possible
  • Samsung P63F | User Guide - Page 29
    Monitor (0 : Korea, 1: USA, .... ) ATV_DTV : Select Analog TV and DTV to be set on TV / Monitor ( 0 : Analog TV, 1: Digital TV) AirCalbe : Select if TV is cabled or general ( 0 : general, 1: cabled) CH_NUM : TV channel number to be set on TV / Monitor to be set on TV / Monitor ( 0 ~ 999.) ●
  • Samsung P63F | User Guide - Page 30
    Sum ● Set Picture Size Header Command 0xAA 0x18 ID Data Length Data 1 1 ScrMode Check Sum ScrMode : Screen Mode Code to be set on TV / Monitor 0x01 0x04 0x31 0x0B 16 : 9 Zoom Wide Zoom 4:3 ● Ack Header Command ID 0xAA 0xFF ScrMode : Same as above Data Length Ack/Nak 3 'A' r-CMD
  • Samsung P63F | User Guide - Page 31
    Check 0 Sum ● Ack Header Command Data Length Ack/Nak r-CMD Val 1 ID 0xAA 0xFF 3 'A' 0x19 Screen Size Screen Size : Screen size of TV / Monitor (Range: 0 ~ 255, Unit: Inch) Check Sum ● Nak Header Command Data Length Ack/Nak ID 0xAA 0xFF 3 'N' ERR : Error code that shows what
  • Samsung P63F | User Guide - Page 32
    Set Signal Control R Gain Header Command 0xAA 0x1A ID Data Length Data 1 1 R Offset Check Sum R Offset : R Gain value to be set on TV/Monitor (0 ~ 100) ● Ack Header Command ID 0xAA 0xFF R Offset : Same as above Data Length Ack/Nak r-CMD Val 1 3 'A' 0x1A R Offset Check Sum ● Nak
  • Samsung P63F | User Guide - Page 33
    Signal Control G Gain Header Command 0xAA 0x1B ID Data Length Data 1 1 G Offset Check Sum G Offset : G Offset value to be set on TV/Monitor (0 ~ 100) ● Ack Header Command ID 0xAA 0xFF G Offset : Same as above Data Length Ack/Nak 3 'A' r-CMD 0x1B Val 1 G Offset Check Sum ● Nak
  • Samsung P63F | User Guide - Page 34
    Signal Control B Offset Header Command 0xAA 0x1C ID Data Length Data 1 1 B Offset Check Sum B Offset : B Offset value to be set on TV/Monitor (0 ~ 100) ● Ack Header Command ID 0xAA 0xFF B Offset : Same as above Data Length Ack/Nak r-CMD Val 1 3 'A' 0x1C B Offset Check Sum ● Nak
  • Samsung P63F | User Guide - Page 35
    0x24 ID Data Length Data 1 1 Contrast Check Sum Contrast : Contrast value code to be set on TV/Monitor ( 0 ~ 100 ) ● Ack Header Command ID 0xAA 0xFF Contrast : Same as above Data Length Ack/Nak is r-CMD 0x24 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 34
  • Samsung P63F | User Guide - Page 36
    ID Data Length Data 1 Check 1 Brightness Sum Brightness : Brightness value code to be set on TV/Monitor ( 0 ~ 100 ) ● Ack Header Command ID 0xAA 0xFF Brightness : Same as above Data Length error is r-CMD 0x25 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 35
  • Samsung P63F | User Guide - Page 37
    0xAA 0x26 ID Data Length Data 1 Check 1 Sharpness Sum Sharpness : Sharpness value code to be set on TV/Monitor ( 0 ~ 100 ) Caution : Sharpness could only be set in 50 Steps (0, 2, 4, 6... 100) ● error is r-CMD 0x26 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 36
  • Samsung P63F | User Guide - Page 38
    Command 0xAA 0x27 ID Data Length Data 1 1 Color Check Sum Color : Color value code to be set on TV/Monitor( 0 ~ 100 ) ● Ack Header Command ID 0xAA 0xFF Color : Same as above Data Length Ack/Nak r- r-CMD 0x27 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 37
  • Samsung P63F | User Guide - Page 39
    Header Command 0xAA 0x28 ID Data Length Data 1 1 Tint Check Sum Tint : Tint value code to be set on TV/Monitor (0 ~ 100 ) R Tint Value G (100 - Tint) Value Caution : Tint could only be set in 50 Steps CMD 0x28 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 38
  • Samsung P63F | User Guide - Page 40
    Command 0xAA 0x29 ID Data Length Data 1 1 Red Check Sum Red : Red Gain value code to be set on TV/Monitor ( 0 ~ 100 ) ● Ack Header Command ID 0xAA 0xFF Red : Same as above Data Length Ack/Nak r-CMD r-CMD 0x29 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 39
  • Samsung P63F | User Guide - Page 41
    0xAA 0x2A ID Data Length Data 1 1 Green Check Sum Green : Green Gain value code to be set on TV/Monitor ( 0 ~ 100 ) ● Ack Header Command ID 0xAA 0xFF Green : Same as above Data Length Ack/Nak r-CMD r-CMD 0x2A Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 40
  • Samsung P63F | User Guide - Page 42
    0xAA 0x2B ID Data Length Data 1 1 Blue Check Sum Blue : Blue Gain value code to be set on TV/Monitor ( 0 ~ 100 ) ● Ack Header Command ID 0xAA 0xFF Blue : Same as above Data Length Ack/Nak r-CMD is r-CMD 0x2B Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 41
  • Samsung P63F | User Guide - Page 43
    Command 0xAA 0x2C ID Data Length Data 1 1 Treble Check Sum Treble : Treble value code to be set on TV/Monitor ( 0 ~ 100 ) Caution : Treble could only be set in 40 Steps (0, 2, 5, 7... 100) ● Ack is r-CMD 0x2C Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 42
  • Samsung P63F | User Guide - Page 44
    -DSW External Control - 0008 * Bass Control ● Function Personal Computer changes Bass of TV / Monitor. ● Get Bass Status Header Command 0xAA 0x2D ID Data Length Check 0 Sum ● Set Bass occurred error is r-CMD 0x2D Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 43
  • Samsung P63F | User Guide - Page 45
    0xAA 0x2E ID Data Length Data 1 1 Balance Check Sum Balance : Balance value code to be set on TV/Monitor ( 0 ~ 100 ) L (100 - Balance) Value R Balance Value Caution : Balance could only be set r-CMD 0x2E Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 44
  • Samsung P63F | User Guide - Page 46
    Length Data 1 1 Coarse Check Sum Coarse : Coarse Increase/Decrease code to be set on TV/Monitor 1 Increase 0 Decrease ● Ack Header Command ID 0xAA 0xFF Coarse : Same as above Data Length Ack is r-CMD 0x2F Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 45
  • Samsung P63F | User Guide - Page 47
    Control - 0008 * Fine Control (PC, BNC Only) ● Function Personal Computer adjusts Fine of TV / Monitor. ● Get Fine Status None ● Set Fine Header Command Data Length ID 0xAA 0x30 1 Fine : Phase is r-CMD 0x30 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 46
  • Samsung P63F | User Guide - Page 48
    Data Length Data 1 1 H-Pos Check Sum H-Pos : H-Position Increase/Decrease code to be set on TV/Monitor 1 Move to Right 0 Move to Left ● Ack Header Command ID 0xAA 0xFF H-Pos : Same as above is r-CMD 0x31 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 47
  • Samsung P63F | User Guide - Page 49
    Data Length Data 1 1 V-Pos Check Sum V-Pos : V-Position Increase/Decrease code to be set on TV/Monitor 1 Move Down 0 Move Up ● Ack Header Command ID 0xAA 0xFF V-Pos : Same as above Data Length r-CMD 0x32 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 48
  • Samsung P63F | User Guide - Page 50
    External Control - 0008 * Clear Menu Control ● Function Personal Computer removes Menu OSD left in TV / Monitor. ● Get Clear Menu Status None ● Set Clear Menu Header Command ID 0xAA 0x34 Clear : 0x00 is r-CMD 0x34 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 49
  • Samsung P63F | User Guide - Page 51
    - 0008 * Remote Control ● Function Personal Computer enables/disables IR receiving function of TV/Monitor/ Can operate regardless of whether power is ON/OFF ● Get Remote Status Header Command 0xAA is r-CMD 0x36 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 50
  • Samsung P63F | User Guide - Page 52
    0x37 ID Data Length Data 1 1 Contrast Check Sum Contrast : RGB Contrast value code to be set on TV/Monitor ( 0 ~ 100 ) ● Ack Header Command ID 0xAA 0xFF Contrast : Same as above Data Length Ack/ is r-CMD 0x37 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 51
  • Samsung P63F | User Guide - Page 53
    (PC, BNC, DVI Only) ● Function Personal Computer changes Brightness when Input Source of TV / Monitor is PC. ● Get Brightness Status Header Command 0xAA 0x38 ID Data Length Check 0 Sum ● Set error is r-CMD 0x38 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 52
  • Samsung P63F | User Guide - Page 54
    Header Command Data Length Data 1 ID 0xAA 0x3C 1 PIP PIP : PIP On/Off code to be set on TV/Monitor 1 PIP ON 0 PIP OFF Check Sum ● Ack Header Command 0xAA 0xFF ID Data Length Ack/Nak r-CMD 3 'A' r-CMD 0x3C Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 53
  • Samsung P63F | User Guide - Page 55
    Length Ack/Nak ID 0xAA 0xFF 3 'N' ERR : Error code that shows what occurred error is r-CMD 0x3D Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 54
  • Samsung P63F | User Guide - Page 56
    0x3E ID Data Length Data 1 Check 1 Color Tone Sum Color Tone : Color Tone value code to be set on TV/Monitor ( 0 ~ 4 ) 0x00 0x01 0x02 0x03 0x04 0x50 Cool 2 Cool 1 Normal Warm 1 Warm 2 Off ● Ack error is r-CMD 0x3E Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 55
  • Samsung P63F | User Guide - Page 57
    0x3F ID Data Length Data 1 1 C_Temp Check Sum C_Temp : Color Temperature value code to be set on TV/Monitor ( 0 ~ 10 ) ● Ack Header Command ID 0xAA 0xFF C_Temp : Same as above Data Length Ack/Nak is r-CMD 0x3F Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 56
  • Samsung P63F | User Guide - Page 58
    ID Data Length Data 1 1 P.Source Check Sum P.Source : Input Source code to be set on TV/Monitor Caution : PIP Source convert may not operate depending on Main Source. Refer to table below. * Models with that shows what occurred error is Display S/W, VD Business Team, Samsung Electronics 57
  • Samsung P63F | User Guide - Page 59
    Length Ack/Nak ID 0xAA 0xFF 3 'N' ERR : Error code that shows what occurred error is r-CMD 0x41 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 58
  • Samsung P63F | User Guide - Page 60
    ID Data Length Data 1 1 P.Size Check Sum P.Size : PIP Size value code to be set on TV/Monitor 0x00 0x06 0x08 0x04 0x05 0x09 PIP Off Large Small Double 1 Double 2 Double 3 ● Ack Header Command ID r-CMD 0x42 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 59
  • Samsung P63F | User Guide - Page 61
    Length Data 1 1 P.Locate Check Sum P.Locate : PIP Locate Increase/Decrease code to be set on TV/Monitor 0 PIP Off(Get Only) 1 Upper Left 2 Upper Right 3 Lower Right 4 Lower Left ● Ack error is r-CMD 0x43 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 60
  • Samsung P63F | User Guide - Page 62
    0x47 ID Data Length Data 1 1 S.Selct Check Sum S.Select : Sound Select code to be set on TV/Monitor 1 Main 0 Sub ● Ack Header Command ID 0xAA 0xFF S.Select : Same as above Data Length Ack/Nak is r-CMD 0x47 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 61
  • Samsung P63F | User Guide - Page 63
    SEC-VD-DSW External Control * Pixel Shift Control ● Function Personal Computer controls Pixel Shift function of TV / Monitor. Cannot control when Video Wall is on or when Zoom(0x39) is set or when Input Signal is VESA Mode in DVI. ● Get Pixel Shift
  • Samsung P63F | User Guide - Page 64
    Sum ● Set Video Wall Header Command Data Length Data 1 ID 0xAA 0x4F 1 V.Wall V.Wall : Video Wall code set on TV/Monitor Set OFF No. 1 No. 2 No. 3 No. 4 No. 5 ... No. 9 ... No. 16 2X2 0x00 0x11 0x12 is r-CMD 0x4F Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 63
  • Samsung P63F | User Guide - Page 65
    - 0008 * Auto Lamp Control ● Function Personal Computer sets Auto Lamp Function of TV / Monitor. When Manual Lamp Control is on, Auto Lamp Control will automatically turn off. ● Get Auto Lamp Header error is r-CMD 0x57 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 64
  • Samsung P63F | User Guide - Page 66
    Lamp Status Header Command ID 0xAA 0x58 Data Length Check 0 Sum ● Set Manual Lamp Header Command 0xAA 0x58 ID Data Length Data 1 Check 1 LampValue Sum LampValue : Manual Lamp value to be set on TV/Monitor (0 ~ 100) ● Ack Header Command 0xAA 0xFF ID Data Length Ack/Nak r-CMD
  • Samsung P63F | User Guide - Page 67
    Data Length Data 1 ID 0xAA 0x59 1 Safety Screen Check Sum Type Safety Screen Type : Safety Screen Type to be set on TV/Monitor (1~6) 0 Off 1 Signal Pattern 2 All White 3 Scroll 4 Bar 6 Eraser ● Ack Header Command Data Length Ack/Nak r-CMD ID 0xAA 0xFF 3 'A' 0x59 Safety
  • Samsung P63F | User Guide - Page 68
    2 All White 3 Inverse 4 Bar 5 Bar & Inverse T.Period : SBP Timer Period value code to be set on TV/Monitor (1~24 Hr.) T.Time : SBP Timer Time value code set on TV/Monitor (1~30 min.) ● Ack Header Command Data Length Ack/Nak ID 0xAA 0xFF 5 'A' Val 3 T.Time Check Sum Timer, T.Period
  • Samsung P63F | User Guide - Page 69
    Data Length Data 1 Check 1 WallMode Sum WallMode : Video Wall Mode code to be set on TV/Monitor 1 Full 0 Natural ● Ack Header Command ID 0xAA 0xFF WallMode : same as above Data Length Ack/Nak is r-CMD 0x5C Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 68
  • Samsung P63F | User Guide - Page 70
    Header Command Data Length Data 1 ID 0xAA 0x5D 1 Lock Lock : Lock code to be set on TV/Monitor 1 On 0 Off Check Sum ● Ack Header Command ID 0xAA 0xFF Lock : Same as above Data Length Ack r-CMD 0x5D Val 1 Lock Check Sum Display S/W, VD Business Team, Samsung Electronics 69
  • Samsung P63F | User Guide - Page 71
    1 Data 1 Panel Lock Check Sum Panel Lock : Panel Key Lock On/Off code to be set on TV/Monitor 1 Lock 0 Unlock ● Ack Header Command ID 0xAA 0xFF Data Length Ack/Nak 3 'A' Panel Lock : Same as is r-CMD 0x5F Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 70
  • Samsung P63F | User Guide - Page 72
    Header Command Data Length Data 1 ID 0xAA 0x70 1 OSD OSD : OSD On/Off code to be set on TV/Monitor 1 OSD On 0 OSD Off Check Sum ● Ack Header Command ID 0xAA 0xFF OSD : Same as above Data Length r-CMD 0x70 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 71
  • Samsung P63F | User Guide - Page 73
    0xAA 0x71 ID Data Length Data 1 1 PMode Check Sum PMode : Picture Mode code to be set on TV/Monitor Source AV S-Video Component HDCP ( TV ) PC BNC DVI ( MagicNet ) Data 0x00 0x01 0x02 0x03 0x50 error is r-CMD 0x71 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 72
  • Samsung P63F | User Guide - Page 74
    Data Length Data 1 ID 0xAA 0x72 1 SMode SMode : Sound Mode code to be set on TV/Monitor Data 0x00 0x01 0x02 0x03 0x04 Mode Standard Music Movie Speech Custom Check Sum ● Ack Header Command ID is r-CMD 0x72 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 73
  • Samsung P63F | User Guide - Page 75
    Data Length Data 1 Check 1 NR Mode Sum NR Mode : NR Mode On/Off code to be set on TV/Monitor 1 NR Mode On 0 NR Mode Off ● Ack Header Command ID 0xAA 0xFF NR Mode : Same as above Data error is r-CMD 0x73 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 74
  • Samsung P63F | User Guide - Page 76
    ID Data Length 1 Data 1 Color Tone Check Sum Color Tone : Color Tone value code to set on TV/Monitor (0 ~ 3) Source PC DVI BNC Data 0x00 0x01 0x02 0x03 0x50 Mode Custom Cool Normal Warm Off ● Ack error is r-CMD 0x75 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 75
  • Samsung P63F | User Guide - Page 77
    1 1 A.Adjustment Check Sum A.Adjustment : Auto Auto Adjustment Value Code to be set on TV/Monitor 1 Enable 0 Disable ● Ack Header Command ID 0xAA 0xFF Data Length Ack/Nak 3 'A' A.Adjustment is r-CMD 0x76 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 76
  • Samsung P63F | User Guide - Page 78
    0xAA 0x77 1 All Key Check Sum All Key : Lock On/Off code of every Key to be set on TV/Monitor 1 Lock 0 Unlock ● Ack Header Command ID 0xAA 0xFF All Key : Same as above Data Length Ack/Nak r-CMD is r-CMD 0x77 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 77
  • Samsung P63F | User Guide - Page 79
    Header Command Data Length Data 1 ID 0xAA 0x78 1 SRS SRS : SRS TS XT code to be set on TV/Monitor 1 SRS ON 0 SRS OFF Check Sum ● Ack Header Command ID 0xAA 0xFF SRS : Same as above Data Length r-CMD 0x78 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 78
  • Samsung P63F | User Guide - Page 80
    Header Command Data Length Data 1 ID 0xAA 0x79 1 FMode FMode : Film Mode code to be set on TV/Monitor 1 Film Mode ON 0 Film Mode OFF Check Sum ● Ack Header Command ID 0xAA 0xFF FMode : Same as r-CMD 0x79 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 79
  • Samsung P63F | User Guide - Page 81
    1 ID Check Sum 0xAA 0x7A 1 SBalance SBalance : Signal Balance code to be set on TV/Monitor 1 Signal Balance ON 0 Signal Balance OFF ● Ack Header Command ID 0xAA 0xFF SBalance : Same as error is r-CMD 0x7A Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 80
  • Samsung P63F | User Guide - Page 82
    ID Data Length Data 1 1 SBGain Check Sum SBGain : Phase B value code of Signal Balance to be set on Monitor ( 0 ~ 100 ) ● Ack Header Command ID 0xAA 0xFF SBGain : Same as above Data Length Ack/Nak is r-CMD 0x7E Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 81
  • Samsung P63F | User Guide - Page 83
    Data Length Data 1 Check 1 SBSharpness Sum SBSharpness : Signal Balance Sharpness value code to be set on Monitor ( 0 ~ 100 ) ● Ack Header Command 0xAA 0xFF ID SBSharpness : Same as above Data is r-CMD 0x7F Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 82
  • Samsung P63F | User Guide - Page 84
    External Control - 0008 * Panel On Time ● Function Personal Computer shows Panel On Time of TV / Monitor. ● Get Panel On Time Status Header Command ID 0xAA 0x83 Data Length Check 0 Sum ● Ack error is r-CMD 0x83 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 83
  • Samsung P63F | User Guide - Page 85
    Command Data Length Data 1 ID 0xAA 0x84 1 V.Wall_On V.Wall_On : Video Wall Code to set on TV / Monitor 1 Video Wall ON 0 Video Wall OFF Check Sum ● Ack Header Command ID 0xAA 0xFF V.Wall_On : Same CMD 0x84 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 84
  • Samsung P63F | User Guide - Page 86
    Temperature Control ● Function Personal Computer sets the maximum value of TV / Monitor temperature. Only supports models with Temperature notification function. ● Get Temperature Status Header Command ID is r-CMD 0x85 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 85
  • Samsung P63F | User Guide - Page 87
    0008 * Brightness Sensor ● Function Personal Computer turns Brightness Sensor of TV / Monitor on/off. Only supports models with Brightness Sensor. ● Get Brightness Sensor ON/OFF Status Header Command is r-CMD 0x86 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 86
  • Samsung P63F | User Guide - Page 88
    DTV, AV, S-Video, Component, HDMI Only) ● Function Personal Computer turns Dynamic Contrast of TV / Monitor on/off. Does not operate in PC, DVI and MagicNet. ● Get Dynamic Contrast ON/OFF Status Header is r-CMD 0x87 Val 1 ERR Check Sum Display S/W, VD Business Team, Samsung Electronics 87
  • Samsung P63F | User Guide - Page 89
    SEC-VD-DSW External Control - 0008 * Video Wall User Control ● Function Personal Computer turns Video Wall function of TV / Monitor on/off. Does not operate in MagicNet. Does not operate when that shows what occurred error is Check Sum Check Sum Display S/W, VD Business Team, Samsung Electronics 88
  • Samsung P63F | User Guide - Page 90
    Val 16 M_Name15 M_Name16 Check Sum M_Name1 ~ M_Name16 : TV / Monitor의 Model Name M_Name1 'S' M_Name2 'y' M_Name3 'n' M_Name4 'c' M_Name5 'r' M_Name11 '4' M_Name12 '0' M_Name13 '0' M_Name14 'D' M_Name15 'X' M_Name16 'n' Display S/W, VD Business Team, Samsung Electronics 89
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
SEC-VD-DSW Multiple Display Control - 0008
Ver. 2.1
2008-06-26
Multiple Display Control Protocol
for SyncMaster
42TS/42PS P50Hn
P50F(n) P63F(n)
320MX(n) 400CX(n)
400MX(n) 460CX(n)
Copyright © 2003
2008
Samsung Electronics Co., Ltd