Samsung RF260BEAESR User Manual Ver.1.0 (English, French, Spanish) - Page 13
Changing The Water Filter - replacement parts
View all Samsung RF260BEAESR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
02 operating Changing the water filter To reduce risk of water damage to your WARNING property DO NOT use generic brands of water filters in your SAMSUNG Refrigerator. USE ONLY SAMSUNG BRAND WATER FILTER. SAMSUNG will not be legally responsible for any damage, including, but not limited to property damage caused by water leakage from use of a generic water filter. SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filter. The Filter light turns red to let you know when it is time to change your water filter cartridge. To give you time to get a new filter, the red light comes on just before the capacity of the current filter runs out. (Red) Changing the filter on time provides you with the freshest, cleanest water from your refrigerator. 111 Shut off the water supply. Then, turn the water filter ( 1 ) about 1/4 turn, counter-clockwise. 222 Pull the water filter ( 1 ) from the case filter ( 2 ). 4 555 After removing the old water filter and installing a new reset the indicator by pressing the "Fridge" and "Power Cool" button simultaneously for about 3 seconds. 666 If you turned off the water supply, turn it back on. For a replacement water filter, you can visit your local home Improvement center or contact the Samsung Parts distributor. Be sure the replacement water filter has the SAMSUNG logo on the box and on the water filter. Link : http://www. samsungparts.com 2 1 •• To change the water filter more easily, shut off the water supply valve. •• Sometimes, it is hard to disassemble the water filter because impurities in the water cause it to stick. If you are having difficulties, grip the water filter firmly and pull it hard. •• When you pull the water filter, a little 2 water can leak from the opening. This is 3 normal. To minimize the water leaks, keep the filter cartridge horizontal when you pull it. •• To prevent overflow, empty the water filter tray ( 3 ) and dry around the filter case ( 2 ). 333 Insert the new filter into the filter case ( 4 ). 444 Push the filter, and then turn it clockwise until it locks. •• If you have trouble inserting the water filter because of high water pressure, shut off the water supply valve. •• The locked symbol should be lined up with the indicator line. Removing any residual matter inside the water supply line after installing the water filter. 111 Turn ON the main water supply and supply water from water supply line. 222 Run water through the dispenser until the water runs clear (approx. 6 to 7 minutes). This will clean the water supply system and remove air from the lines. 333 Additional flushing may be required in some households. 444 Open the Refrigerator door and make sure there are no water leaks coming from the water filter. Be sure to flush the dispenser thoroughly, otherwise water may drip from the dispenser. This means that there is still air in the line. operating _13 DA68-02601B(EN+ES+FR)-0.0.indb 13 2012.3.29 9:28:43 AM