Samsung RFG297AARS/XAA User Manual (user Manual) (ver.1.0) (English) - Page 16

MAKING MINOR ADJUSTMENTS BETWEEN DOORS, After adjusting the doors - review

Get Samsung RFG297AARS/XAA PDF manuals and user guides View all Samsung RFG297AARS/XAA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Setting up your French Door Refrigerator MAKING MINOR ADJUSTMENTS BETWEEN DOORS Remember a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the Refrigerator. When the left door is lower than the right door. When the left door is higher than the right door. Adjustment part Adjustment part 1. If you open the drawer ( 1 ), you can see the lower hinge ( 2 ) . 2. Insert the supplied hex wrench ( 3 ) into the shaft ( 4 ) of the lower hinge. 3. Please adjust the height by turning the hex wrench ( 3 ) clockwise ( ) or counter-clockwise ( ). 2 3 3 4 1 When you turn the hex wrench counter-clockwise( ), the door will move up. 1. A fter adjusting the doors, please insert the supplied fastener-ring ( 5 ) using a pair of pliers ( 6 ) in the gap between the hinge-grommet ( 7 ) and the lower hinge ( 8 ). The number of fastener-rings you'll need to insert depends on the gap. Two fastener-rings are enclosed with the refrigerator. The thickness of each fastener-ring is 0.04 inch. 16_ Setting Up

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
Setting up your French Door Refrigerator
MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the Refrigerator.
When the left
door is lower
than the right
door.
When the left
door is higher
than the right
door.
Adjustment
part
Adjustment
part
16_
Setting Up
1.
If you open the drawer (
1
), you can see the lower hinge (
2
) .
2.
Insert the supplied hex wrench (
3
) into the shaft (
4
) of the lower hinge.
3.
Please adjust the height by turning the hex wrench (
3
) clockwise (
) or counter-clockwise (
).
When you turn the hex wrench counter-clockwise(
), the door will move up.
Two fastener-rings are enclosed with the refrigerator.
The thickness of each fastener-ring is 0.04 inch.
1.
After adjusting the doors, please insert the supplied fastener-ring (
5
) using a pair of pliers (
6
) in the
gap between the hinge-grommet (
7
) and the lower hinge (
8
). The number of fastener-rings you’ll
need to insert depends on the gap.
2
3
4
1
3