Samsung RFG298HDRS User Manual (user Manual) (ver.0.2) (English, French, Spani - Page 11

Operating your French Door Refrigerator Using the control panel RFG297**, RFG29P** RFG296**, RFG298**, RFG29T** 1 2 3 10 7 8 9 4 1 4 5 2 5 6 3 6 10 7 8 9 02 operating ( 1 ) Energy Saver Touching this button turns Energy Saver mode on and off. When you turn Energy Saver on, the Energy Saver icon lights. Turn Energy Saver off and the icon goes off. The Energy Saver function automatically turns on. when power is supplied to the refrigerator. If condensation or water drops appear on the doors, turn the Energy Saver mode off. ( 2 ) Freezer (Hold 3 sec for Power Freeze) Touch this button to set the freezer to your desired temperature. You can set the temperature between -8°F and 8°F (between -22°C and -14°C). Touch and hold this button for 3 seconds to decrease the time needed to freeze products in the Freezer. It can be helpful if you need to quickly freeze easily spoiled items or if the temperature in the freezer has warmed dramatically (For example, if the door was left open). ( 3 ) Alarm / hold 3 sec for Filter Reset This button serves two purposes: 1) To turn the door open alarm on and off If the door alarm is set to On, an alarm beeps if any refrigerator door is left open for more than three minutes. T he beeping stops when you close the door. The door alarm function is preset to On in the factory. You can turn it off by touching and then releasing this button. You can turn it back on in the same fashion. The icon lights up when the function is on. 2) To reset the water filter life indicator. A fter you replace the water filter, touch and hold this button for 3 seconds to reset the water filter life indicator. ( 4 ) Lighting/ Hold 3 sec for C↔F Touching this button turns on the Dispenser LED lamp (under the display) in continuous mode so that it stays on continuously. The button also lights up. If you want the Dispenser lamp to come on only when some one uses the dispenser, touch this button to turn the continuous mode off. Touch and hold this button for 3 seconds to switch the temperature units between °C and °F. ( 5 ) Fridge (Hold 3sec for Power Cool) Touch this button to set the fridge to your desired temperature. You can set the temperature between 34°F and 46°F (between 7°C and 1°C). Touch and hold this button for 3 seconds to decrease the time needed to cool products in the Refrigerator. It can be helpful if you need to quickly cool easily spoiled items or if the temperature in the fridge has warmed dramatically (For example, if the door was left open). ( 6 ) Ice Off (Hold 3 sec for child lock) If you don't want to make more ice, touch this button. Also, pressing this button for 3 seconds turns on Child Lock which locks the display panel and dispenser buttons so the buttons can not be used. The Child Lock icon lights up to indicate you've activated the Child Lock function. Press 3 seconds to unlock. ( 7 ) Ice Type (Cubed) (Crushed) Touch this button to select your desired ice type. Cubed and crushed ice modes alternate when you press the button. This mode can not be used with the Water mode simultaneously. ( 8 ) Water Water Touch this button to dispense water. This mode can not be used with the Ice Type mode simultaneously. Water Water mode will be off if you touch the Ice Type button. operating _11