Samsung RFG298HDRS User Manual (user Manual) (ver.0.2) (English, French, Spani - Page 7

Reattaching The, Refrigerator Doors, Disassemble The Freezer, Drawer - water on bottom of freezer

Get Samsung RFG298HDRS PDF manuals and user guides View all Samsung RFG298HDRS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

01 setting up 5. Remove the screw ( 10 ) attached to the lower left 2 and right door hinges with a philips screwdriver (+). Remove the 2 hex head bolts ( 11 ) attached to the lower left and right door hinges with an allen wrench (3/16"). Remove the lower left and right door hinges ( 12 ). 1 12 10 11 2. Disconnect one connector ( 3 ) on the right side door and one connector ( 4 ) on left side door. To remove the water coupler from the hinge, twist and pull it from the hinge. Remove the water line ( 5 ) while pressing the marked part ( 6 ) of the water line coupler. If a red clip is on the coupler, it must be caution removed before removing the tube. 4 Red Clip (1/4") 3 5 6 Allen wrench Reattaching the refrigerator doors To reattach the fridge doors after you have moved the fridge to its final location, assemble parts in reverse order. Disassemble the freezer drawer 1. Take out the upper drawer by lifting it up. 3. Pull and remove the hinge lever ( 7 ). Remove the ground screw ( 8 ) attached to the upper left and right door hinges with a philips screwdriver (+). Remove the upper left and right door hinges ( 9 ). 8 7 9 2. Remove the tilting pocket ( 1 ) by pulling both support guards ( 2 ) upward at the same time. 3. Take out the lower basket ( 3 ) by lifting the basket up from the rail system. 1 2 SlotSlot 3 4. Lift the door straight up to remove. 4. Remove 4 hex head bolts from both sides with a socket wrench (10mm). 5. Lift up the freezer door from the rails. setting up _07

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
setting up
_07
01 SETTING UP
3
2.
Disconnect one connector (
3
) on the right side
door and one connector (
4
) on left side door.
To
remove the water coupler from the hinge, twist and
pull it from the hinge. Remove the water line (
5
)
while pressing the marked part (
6
) of the water line
coupler.
If a red clip is on the coupler, it must be
removed before removing the tube.
3.
Pull and remove the hinge lever (
7
). Remove the
ground screw (
8
) attached to the upper left and
right door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges (
9
).
4.
Lift the door straight up to remove.
CAUTION
Allen wrench
12
10
11
4
5
6
3
Red Clip
(1/4")
7
8
9
1
2
1
2
5.
Remove the screw (
10
) attached to the lower left
and right door hinges with a philips screwdriver (+).
Remove the 2 hex head bolts (
11
) attached to
the lower left and right door hinges with an allen
wrench (3/16”). Remove the lower left and right
door hinges (
12
).
REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved the
fridge to its final location, assemble parts in reverse
order.
DISASSEMBLE THE FREEZER
DRAWER
1.
Take out the upper drawer
by lifting it up.
2.
Remove the tilting pocket
(
1
) by pulling both support
guards (
2
) upward at the
same time.
3.
Take out the lower basket
(
3
) by lifting the basket up
from the rail system.
4.
Remove 4 hex head bolts
from both sides with a socket
wrench (10mm).
5.
Lift up the freezer door from
the rails.