Samsung RS261MDBP User Manual (user Manual) (ver.1.0) (English) - Page 12

Setting Up The Refrigeratorcont'd

Page 12 highlights

setting up your side-by-side refrigerator SETTING UP the refrigerator(CONT'D) If your entrance won't allow the refrigerator to pass easily through it, you can remove the doors. Removing the Front Leg Cover First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the three screws counter-clockwise. FRONT LEG COVER SCREW Separating the water supply line from the refrigerator 1. Remove the water tube by pressing the coupler 2 and pulling the water tube 1 away. 2 1 Do not cut the water line. Gently separate it from the coupler. Reattaching the water supply line 1. While pressing the front face of coupler Line 2 , insert the water line 1 in the coupler. Carefully place front cover and push to snap it into position. 1 Coupler 2 Line Coupler The water line must be fully inserted to the marked line to prevent water leakage from the dispenser. 12_ setting up

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

12_
setting up
setting up your side-by-side refrigerator
SETTING UP THE REFRIGERATOR(CONT’D)
If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.
Removing the Front Leg Cover
First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the
three screws counter-clockwise.
Separating the water supply line from the refrigerator
1.
Remove the water tube by pressing the coupler
2
and pulling the water tube
1
away.
Reattaching the water supply line
1. While pressing the front face of coupler
2
, insert the water line
1
in the coupler.
Carefully place front cover and push to
snap it into position.
The water line must be fully inserted to the marked line to prevent water leakage from the
dispenser.
Do not cut the water line. Gently separate it from the coupler.
1
2
FRONT LEG COVER
SCREW
1
2
Line
Line
Coupler
Coupler