Samsung RS263TDWP User Manual (user Manual) (ver.1.0) (English, Spanish) - Page 14

setting up your side-by-side refrigerator SETTING UP the refrigerator(CONT'D) If your entrance won't allow the refrigerator to pass easily through it, you can remove the doors. Tools you will need Philips Screwdriver Flat-blade Screwdriver 10mm Socket Wrench Removing the Front Leg Cover First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the three screws counter-clockwise. FRONT LEG COVER SCREW Separating the water supply line from the refrigerator 1. Remove the water tube by pressing the coupler 2 and pulling the water tube 1 away. 2 1 Do not cut the water line. Gently separate it from the coupler. Reattaching the water supply line 1. While pressing the front face of coupler Line 2 , insert the water line 1 in the coupler. Carefully place front cover and push to snap it into position. 1 Coupler 2 2. Insert 1 clip in plastic bac and check that it holds the line firmly Clip A (1/4") Coupler The water line must be fully inserted to the marked line to prevent water leakage from the dispenser. 14_ setting up Line Coupler