Samsung RS265TDRS User Manual (user Manual) (ver.1.0) (English) - Page 14

Setting Up The Refrigeratorcont'd - not making ice

Get Samsung RS265TDRS PDF manuals and user guides
UPC - 036725569522
View all Samsung RS265TDRS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

setting up your side-by-side refrigerator SETTING UP THE REFRIGERATOR(CONT'D) If your entrance won't allow the refrigerator to pass easily through it, you can remove the doors. Tools you will need Philips Screwdriver Flat-blade Screwdriver 10mm Socket Wrench Removing the Front Leg Cover First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the three screws counter-clockwise. FRONT LEG COVER SCREW Separating the Water Supply Line from the Refrigerator 1. Remove two water lines(gray one is for ice and the other one is for water)by pressing the coupler 1 and pulling the water line 2 away. 1 Make sure the color of the 2 water lines match. Reattaching the Water Supply Line Line 1. The Water Line must be fully inserted to the marked line to prevent water leakage from the dispenser. Coupler Line Coupler 2. Insert the 2 clips in the install pack and check that each clip holds the line firmly. These clips are for door re-installation only. clip A (¼") (6.35mm) Coupler clip A (¼") (6.35mm) Coupler The water line must be fully inserted to the marked line to prevent water leakage from the dispenser. 14_ setting up

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
14_
setting up
setting up your side-by-side refrigerator
SETTING UP THE REFRIGERATOR(CONT’D)
If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.
Tools you will need
Removing the Front Leg Cover
First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the
three screws counter-clockwise.
Separating the Water Supply Line from the Refrigerator
1.
Remove two water lines(gray one is for ice and the other one is for water)by pressing the coupler
1
and pulling the water line
2
away.
Reattaching the Water Supply Line
1.
The Water Line must be fully inserted to the
marked line to prevent water leakage from
the dispenser.
2. Insert the 2 clips in the install pack
and check that each clip holds the
line firmly. These clips are for door
re-installation only.
The water line must be fully inserted to the marked line to prevent water leakage from the
dispenser.
FRONT LEG COVER
SCREW
1
2
Make sure the color of the
water lines match.
Line
Line
Coupler
Coupler
clip A
(¼”)
(6.35mm)
clip A
(¼”)
(6.35mm)
Coupler
Coupler
Philips Screwdriver
Flat-blade Screwdriver
10mm Socket Wrench