Home » Samsung Manuals » Computer Monitors » Samsung S22C150N » Manual Viewer

Samsung S22C150N User Manual Ver.1.0 (English) - Page 80

Standard Signal Mode Table

Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

10 Specifications 10.4 Standard Signal Mode Table  This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product.  Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor. If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT monitor before you exchange it with the LCD monitor. If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual. S19C150N / S19C150F Resolution IBM, 720 x 400 VESA, 640 x 480 MAC, 640 x 480 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 MAC, 832 x 624 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1280 x 720 VESA, 1366 x 768 Horizontal Frequency (kHz) 31.469 31.469 35.000 37.861 37.500 35.156 37.879 48.077 46.875 49.726 48.363 56.476 60.023 45.000 47.712 Vertical Frequency (Hz) 70.087 59.940 66.667 72.809 75.000 56.250 60.317 72.188 75.000 74.551 60.004 70.069 75.029 60.000 59.790 Pixel Clock (MHz) 28.322 25.175 30.240 31.500 31.500 36.000 40.000 50.000 49.500 57.284 65.000 75.000 78.750 74.250 85.500 Sync Polarity (H/V) 80 10 Specifications

Section	Page
Table Of Contents	2
Before Using the Product	7
Copyright	7
Icons used in this manual	7
Cleaning	8
Cleaning	8
Securing the Installation Space	9
Precautions for storage	9
Safety Precautions	10
Symbols for safety precautions	10
Electricity and Safety	11
Installation and Safety	12
Operation	14
Correct posture to use the product	18
Preparations	19
1.1 Checking the Contents	19
1.1.1 Removing the Packaging	19
1.1.2 Checking the Components	20
1.2 Parts	21
1.2.1 Frontal Button	21
1.2.2 Reverse Side	23
1.3 Installation	24
1.3.1 Attaching the Stand (S19C150F / S20C150FL)	24
1.3.2 Attaching the Stand (S19C150N / S22C150N)	25
1.3.3 Removing the Stand (S19C150F / S20C150FL)	26
1.3.4 Removing the Stand (S19C150N / S22C150N)	27
1.3.5 Installing a Wall-mount Kit or Desktop Stand (S19C150F / S20C150FL)	28
1.3.6 Adjusting the Product Tilt	29
1.3.7 Anti-theft Lock	30
Connecting and Using a Source Device	31
2.1 Before Connecting	31
2.1.1 Pre-connection Checkpoints	31
2.2 Connecting the Power	32
2.3 Connecting and Using a PC	33
2.3.1 Connection Using the D-SUB Cable (Analogue Type)	33
2.3.2 Driver Installation	34
2.3.3 Setting Optimum Resolution	35
2.3.4 Changing the Resolution Using a PC	36
Screen Setup	40
3.1 Brightness	40
3.1.1 Configuring Brightness	40
3.2 Contrast	41
3.2.1 Configuring Contrast	41
3.3 Sharpness	42
3.3.1 Configuring Sharpness	42
3.4 SAMSUNG MAGIC Bright	43
3.4.1 Configuring SAMSUNG MAGIC Bright	43
3.5 SAMSUNG MAGIC Upscale	44
3.5.1 Configuring SAMSUNG MAGIC Upscale	44
3.6 Image Size	45
3.6.1 Changing the Image Size	45
3.7 H-Position & V-Position	46
3.7.1 Configuring H-Position & V-Position	46
3.8 Coarse	47
3.8.1 Adjusting Coarse	47
3.9 Fine	48
3.9.1 Adjusting Fine	48
Configuring Tint	49
4.1 Red	49
4.1.1 Configuring Red	49
4.2 Green	50
4.2.1 Configuring Green	50
4.3 Blue	51
4.3.1 Configuring Blue	51
4.4 Color Tone	52
4.4.1 Configuring the Color Tone Settings	52
4.5 Gamma	53
4.5.1 Configuring Gamma	53
Coordinating OSD	54
5.1 Language	54
5.1.1 Configuring Language	54
5.2 Menu H-Position & Menu V-Position	55
5.2.1 Configuring Menu H-Position & Menu V-Position	55
5.3 Display Time	56
5.3.1 Configuring Display Time	56
5.4 Transparency	57
5.4.1 Changing Transparency	57
Setup and Reset	58
6.1 Reset	58
6.1.1 Initializing Settings (Reset)	58
6.2 Eco Saving	59
6.2.1 Configuring Eco Saving	59
6.3 Off Timer	60
6.3.1 Configuring Off Timer	60
6.4 Turn Off After	61
6.4.1 Configuring Turn Off After	61
6.5 Key Repeat Time	62
6.5.1 Configuring Key Repeat Time	62
6.6 Customized Key	63
6.6.1 Configuring Customized Key	63
INFORMATION Menu and Others	64
7.1 INFORMATION	64
7.1.1 Displaying INFORMATION	64
7.2 Configuring Brightness and Contrast in the Initial Screen	65
Installing the Software	66
8.1 MagicTune	66
8.1.1 What is \	66
8.1.2 Installing the Software	66
8.1.3 Removing the Software	67
8.2 MultiScreen	68
8.2.1 Installing the Software	68
8.2.2 Removing the Software	69
Troubleshooting Guide	70
9.1 Requirements Before Contacting Samsung Customer Service Center	70
9.1.1 Testing the Product	70
9.1.2 Checking the Resolution and Frequency	70
9.1.3 Check the following.	70
9.2 Q & A	73
Specifications	75
10.1 General (S19C150N / S22C150N)	75
10.2 General (S19C150F / S20C150FL)	77
10.3 PowerSaver	79
10.4 Standard Signal Mode Table	80
Appendix	83
Contact SAMSUNG WORLD WIDE	83
Responsibility for the Pay Service (Cost to Customers)	89
Not a product defect	89
A Product damage caused by customer's fault	89
Others	89
Correct Disposal	90
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)	90
Terminology	91

Match case Limit results 1 per page

Specifications

10 Specifications

10.4

Standard Signal Mode Table



This product can be set to only one resolution for each screen size to obtain the optimum picture

quality due to the nature of the panel. Therefore, a resolution other than the specified resolution

may degrade the picture quality. To avoid this, it is recommended that you select the optimum

resolution specified for the screen size of your product.



Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.

If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT

monitor before you exchange it with the LCD monitor.

If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will

automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal

modes, the screen may be blank even though the power LED turns on. In such a case, change the

settings according to the following table by referring to the graphics card user manual.

S19C150N / S19C150F

Resolution

Horizontal

Frequency

(kHz)

Vertical

Frequency

(Hz)

Pixel Clock

(MHz)

Sync Polarity

(H/V)

IBM, 720 x 400

31.469

70.087

28.322

-/+

VESA, 640 x 480

31.469

59.940

25.175

-/-

MAC, 640 x 480

35.000

66.667

30.240

-/-

VESA, 640 x 480

37.861

72.809

31.500

-/-

VESA, 640 x 480

37.500

75.000

31.500

-/-

VESA, 800 x 600

35.156

56.250

36.000

+/+

VESA, 800 x 600

37.879

60.317

40.000

+/+

VESA, 800 x 600

48.077

72.188

50.000

+/+

VESA, 800 x 600

46.875

75.000

49.500

+/+

MAC, 832 x 624

49.726

74.551

57.284

-/-

VESA, 1024 x 768

48.363

60.004

65.000

-/-

VESA, 1024 x 768

56.476

70.069

75.000

-/-

VESA, 1024 x 768

60.023

75.029

78.750

+/+

VESA, 1280 x 720

45.000

60.000

74.250

+/+

VESA, 1366 x 768

47.712

59.790

85.500

+/+