Samsung SCD-2020R User Manual
Samsung SCD-2020R Manual
 |
View all Samsung SCD-2020R manuals
Add to My Manuals
Save this manual to your list of manuals |
Samsung SCD-2020R manual content summary:
- Samsung SCD-2020R | User Manual - Page 1
High Resolution D/N IR Dome Camera User Manual SCD-2020R - Samsung SCD-2020R | User Manual - Page 2
Camera User Manual Copyright ©2010 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin please let us know. Samsung Techwin will resolve the problem for free of charge. The - Samsung SCD-2020R | User Manual - Page 3
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description. ■ SCD-2020R SERIES • NTSC MODEL SCD-2020RN • PAL MODEL SCD-2020RP ■ MODEL DESCRIPTION • SCD-2020RX_ SIGNAL SYSTEM • SIGNAL - Samsung SCD-2020R | User Manual - Page 4
user to the presence 1 of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. C WARNING 1 • shock, or damage to the product. 6 3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause 7 abnormal heat - Samsung SCD-2020R | User Manual - Page 5
contact the nearest service center. never c disassemble or modify this product in any way. (samsung is not liable for problems caused by 6. Install it in a place with good ventilation. 7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the - Samsung SCD-2020R | User Manual - Page 6
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be - Samsung SCD-2020R | User Manual - Page 7
block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators to avoid injury from tip-over. 14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus t has been damaged in - Samsung SCD-2020R | User Manual - Page 8
12 Adjust the panning and tilting while watching the monitor y CONNECTION Connecting to Monitor 16 Connecting to Power y SETUP Menu Configration 18 Menu Setup y y TROUBLESHOOTING Troubleshooting 31 y SPECIFICATIONS Specifications y 32 Dimension y 8_ contents - Samsung SCD-2020R | User Manual - Page 9
6mm(1/3") 410,000 (NTSC) pixels, 470,000(PAL) pixels SONY CCD, the camera produces clear picture quality with a horizontal resolution of 600 TV lines for color and 700 TV lines for BW y SSNR3 (Samsung Super Noise Reduction) Function The high-performance W-V DSP chip effectively removes low-light - Samsung SCD-2020R | User Manual - Page 10
, SHARPNESS, MOTION DETECTION and PRIVACY functions are provided. WHAT'S INCLUDED Check if the following items are included in the product package. High Resolution D/N IR Dome Camera User Manual SCD-2020R SCD-2020R Instruction Manual M4 Tapping Screw 3EA 10_ introduction - Samsung SCD-2020R | User Manual - Page 11
COMPONENT NAMES AND FUNCTIONS FRONT ❶ ➌ ➐ ● INTRODUCTION ➋ ➍ ➎ ➏ ❶ Pan Base : control panning angle of camera ❷ Tilt Base : control tilting angle of camera ❸ Lens Module : f=3.6mm,F2.0(IR Lens) ❹ Power Input Connector ❺ Video Output Jack ❻ Function Setup Switch : displays the OSD menu and moves - Samsung SCD-2020R | User Manual - Page 12
direction as shown in the figure 1. M The installation should be done by qualified service personnel or system installers. If the ceiling material is not strong enough to hold the installation screws, the camera may fall off. Reinforce the ceiling as needed. To change the position of the cable - Samsung SCD-2020R | User Manual - Page 13
the ceiling bracket (located where the arrow points to) and separate it from the main body of the camera by rotating it counterclockwise. (refer to the picture in 'Notes' on page 12) 2. Adjust the camera lens to face the area to be monitored and fix the main body and the dome cover by - Samsung SCD-2020R | User Manual - Page 14
installation A Pan Base fixation screw W M4 tapping screw [Figure-2] M If you want to install the camera with the ceiling bracket combined, fix it using two M4 tapping screws at the side of the main body(refer to the [Figure-2] on page 14) 14_ installation - Samsung SCD-2020R | User Manual - Page 15
˚ ● INSTALLATION ADJUST THE PANNING AND TILTING WHILE WATCHING THE MONITOR Tilt Base fixation screw 176˚ Pan Base fixation screw ng 176˚ 1. You can adjust the camera to point in any direction by using the pan, Tilt mechanism. y Pan Base can rotates by ±176°(total 352°) y Tilt Base covers 75˚ angle - Samsung SCD-2020R | User Manual - Page 16
CONNECTING TO MONITOR W Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor. V Monitor y CCTV Camera * * y As the connecting method varies with the instruments, refer to the manual supplied with the instrument. y Only connect the cable when the power is turned off. CONNECTING TO - Samsung SCD-2020R | User Manual - Page 17
decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera. * Standard voltage for camera operation : DC 12V ±10% * There may be some deviation in voltage drop depending on the type of wire and - Samsung SCD-2020R | User Manual - Page 18
MENU CONFIGRATION LENS SHADE EXPOSURE WHITE BALANCE SSDR BACKLIGHT SSNR3 DAY/NIGHT SPECIAL EXIT Setup Menu ● OFF ● BRIGHTNESS ● SENS-UP ● ATW ● MANUAL ● OFF ● OFF ● ON ● AUTO ● IMAGE ADJ ● SYNC ● DIS ● SAVE ● ON ● SHUTTER ● RETURN ● OUTDOOR ● AWCªSET ● ON ● BLC ● OFF ● COLOR ● MONITOR ● MOTION - Samsung SCD-2020R | User Manual - Page 19
● SETUP Select the function by moving up or down direction of function setup switch. MAIN SETUP 䯝 1.LENS SHADE 2.EXPOSURE 3.WHITE BAL 4.SSDR 5.BACKLIGHT 6.SSNR3 7.DAY/NIGHT 8.SPECIAL 9.EXIT OFF ATW OFF OFF ON AUTO SAVE Change the status by moving the setup switch left or right. 2. Select a - Samsung SCD-2020R | User Manual - Page 20
37dB. y SENS-UP : When it is night or dark, the LIMIT camera automatically detects the 䯝 AUTO x2 light level and maintains a clear picture if this SENS-UP function. Press SET to Return M When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled. y RETURN : Select this to - Samsung SCD-2020R | User Manual - Page 21
mode, fine-tune the White Balance and then press the Function Setup switch. WB MANUAL 䯝 RGAIN 529 BGAIN 532 Press SET to Return y AWCªSET : To find the optimal luminance level for the current environment, point the camera towards a sheet of white paper and press the Function Setup switch. If the - Samsung SCD-2020R | User Manual - Page 22
➋ When the ambient illumination of the subject is dim. ➌ If the camera is directed towards a fluorescent light or is installed in a place where changes dramatically, the White Balance operation may become unstable. SSDR (SAMSUNG SUPER DYNAMIC RANGE) SSDR illuminates darker areas of an image while - Samsung SCD-2020R | User Manual - Page 23
so that it delivers a distinctive subject and background at e the same time, even when the subject is in backlight, unlike conventional cameras, by adopting a proprietary W-V DSP chip. 1. When the SETUP menu screen is displayed, MAIN SETUP select 'BACKLIGHT' by using the Function 1.LENS - Samsung SCD-2020R | User Manual - Page 24
setup y OFF : Not being used 3. Select a desired mode using the Function Setup switch and press the switch. M Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. In a - Samsung SCD-2020R | User Manual - Page 25
the day/ night mode. ª3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s - DURATION : You can select the brightness level at which the camera el switches from day to night mode. Color ª B/W Fast 2.5 lux Slow 1 lux B/W ª Color 5 lux 10 lux œ Light levels are often site dependant. English_25 - Samsung SCD-2020R | User Manual - Page 26
mode operates as like selecting 'COLOR' mode. The OSD key does not work for 3 seconds when switching to Color or B/W, to ensure stable camera operation. SPECIAL 1. When the SETUP menu screen is displayed, select 'SPECIAL' by using the Function Setup switch so that the arrow indicates 'SPECIAL - Samsung SCD-2020R | User Manual - Page 27
Function Setup switch so that the arrow indicates 'CAM TITLE'. ➋ Set it to 'ON' by using the Function Setup switch. CAMERA TITLE SETUP ABCDEFGHIJKLM NOPQRSTUVWXYZ abcdefghijklm nopqrstuvwxyz -.0123456789 « ª C L R P O S E N D M When the CAM TITLE menu is 'OFF', no title will be displayed on - Samsung SCD-2020R | User Manual - Page 28
is determined, select 'END' and press the Function Setup switch to return to the SPECIAL menu. FRONT DOOR y SYNC : Because the input power of SCD-2020R is DC, SYNC is fixed at INT. - INT : Internal Synchronization Type y MOTION DET : This product has a feature that allows you to observe movement - Samsung SCD-2020R | User Manual - Page 29
● SETUP - XPOS : Determines the coordinate of the horizontal axis for SEL POS. - YPOS : Determines the coordinate of the vertical axis for SEL POS. . - FILL ª SET : Fills in a selected MD area. The color of filling is sequentially n selected as brown, orange, blue, cyan, yellowish green, yellow - Samsung SCD-2020R | User Manual - Page 30
save the SPECIAL menu settings and return to the MAIN SETUP menu. EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. y SAVE : Save the current settings and exit the MAIN SETUP menu. y NOT SAVE : Do not save the current settings and exit the MAIN SETUP - Samsung SCD-2020R | User Manual - Page 31
● TROUBLESHOOTING troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. PROBLEM SOLUTION Nothing appears on the screen. Ü Check that the power cord - Samsung SCD-2020R | User Manual - Page 32
specifications SPECIFICATIONS SCD-2020RN SCD-2020RP B C VIDEO Imaging Device 1/3" Super HAD CCD C Total Pixels 811(H) x 508(V) 795(H) x 596(V) D Effective Pixels 768(H) x 494(V) 752(H) x 582(V) D M Scanning System 2 : 1 Interlace P Synchronization Internal S Frequency H:15. - Samsung SCD-2020R | User Manual - Page 33
SCD-2020RN SCD-2020RP Backlight Gain Control Low / High / Off White Balance ATW / Outdoor / Indoor / Manual / AWC (1,700K° ~ 11,000K°) Electronic Shutter Speed 1/60 ~ 1/120,000 Mechanical , Color / Material Body : Ivory, PC/ABS, Dome Cover : Clear, PC Dimension (WxHxD) Ø107.6 x 83.7mm - Samsung SCD-2020R | User Manual - Page 34
specifications DIMENSION A M Ø107.6 M E E 83.7mm E M R45 B C W to M S F P P 81.6mm 34_ specifications - Samsung SCD-2020R | User Manual - Page 35
Address Equipment Type/Environment Model Name Beginning Serial NO. Conformance to 89 / 336 / EEC SAMSUNG TECHWIN CO., LTD SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 CCTV Camera SCD-2020RP C11S3010007 EN 50081-1 : 1992 EMC-Directive 89/336 EEC and 92/31/EEC EN - Samsung SCD-2020R | User Manual - Page 36
MEMO - Samsung SCD-2020R | User Manual - Page 37
MEMO - Samsung SCD-2020R | User Manual - Page 38
MEMO - Samsung SCD-2020R | User Manual - Page 39
MEMO - Samsung SCD-2020R | User Manual - Page 40
1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222, FAX : +1-310-632-2195 www.samsungcctvusa.com SAMSUNG TECHWIN EUROPE LTD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS TEL : +44-1932-45-5300, FAX : +44-1932
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
 |
 |
High Resolution D/N IR
Dome Camera
User Manual
SCD-2020R