Samsung SCP-3430HP User Manual

Samsung SCP-3430HP Manual

Get Samsung SCP-3430HP PDF manuals and user guides View all Samsung SCP-3430HP manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung SCP-3430HP manual content summary:

  • Samsung SCP-3430HP | User Manual - Page 1
    Smart Dome Camera User Manual SCP-3430(P)
  • Samsung SCP-3430HP | User Manual - Page 2
    OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol to the floor/wall in accordance with the installation instructions.  Use only the 24V, 60Hz AC adaptor the product. 3. Do not connect multiple cameras to a single adapter. Exceeding the capacity
  • Samsung SCP-3430HP | User Manual - Page 3
    contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized due to temperature difference between internal and external of the dome camera. 12. If you install this product in a low-temp area such as inside a
  • Samsung SCP-3430HP | User Manual - Page 4
    or damage to the product. 5. Keep out of direct sunlight and heat radiation sources. It may cause fire. 6. Install it in a place with good ventilation. 7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor. 8. Apparatus shall not
  • Samsung SCP-3430HP | User Manual - Page 5
    energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
  • Samsung SCP-3430HP | User Manual - Page 6
    Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
  • Samsung SCP-3430HP | User Manual - Page 7
    Important Safety Instructions Contents Features What's Included At a Glance Installation & Connection 10 10 Preparing Installation 10 Installation 14 Initial Setup 17 Connecting with Other Device Setup 20 20 How to use the Keyboard Controller 21 Main Menu 22 Profile 24 Camera Set 33 Intelligent
  • Samsung SCP-3430HP | User Manual - Page 8
    zone to hide a specific area for personal privacy  PAN/TILT for precise control at high speed What's Included Please check if your camera and accessories are all included in the product package. SW602 SW602 SW602 Camera 6TFS.BOVBM User Manual Frame Set Template Cover Connectors _ overview
  • Samsung SCP-3430HP | User Manual - Page 9
    At a Glance CAMERA ● overview HOOK FRAME SET HOOK LENS ALARM IN RS-485 POWER INPUT ALARM OUT M  Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol. English _
  • Samsung SCP-3430HP | User Manual - Page 10
    template's screw holes and those of the frames set.  This template prevents dust entering from the ceiling into the camera assembly. CEILING CABLES CEILING TEMPLATE CABLES Installation 1. Press the "SNAP FIT" on the "ADAPTOR" to open the "ADAPTOR", and arrange cables so they pass out
  • Samsung SCP-3430HP | User Manual - Page 11
    2. Use the three "SCREWS" to fix the "FRAME SET" on a "CAMERA" installation position. FRAME SET ● installation & connection ADAPTOR SCREW SCREW SCREW 3. Connect external cables to the "CONNECTORS(ALARM IN, POWER, RS-485, ALARM OUT)"and connect the "CONNECTOR"
  • Samsung SCP-3430HP | User Manual - Page 12
    to the "RACK" properly. FRAME SET BRACKET WIRE 22P CONNECTOR SAFETY WIRE CAMERA FRAME SET RACK CAMERA FRAME SET RACK HOOK CAMERA HOOK PROTECTIVE TAPE PROTECTIVE FILM PROTECTIVE TAPE M  When the installation is completed, remove the "PROTECTIVE FILM" and "PROTECTIVE TAPE" from on the
  • Samsung SCP-3430HP | User Manual - Page 13
    ● installation & connection 5. Arrange the "COVER" arrow in line with the "FRAME SET" the "COVER" should not move any further if you turn the "COVER" counter clockwise. FRAME SET BUTTON COVER CAMERA COVER If you want to remove the "COVER", hold down the "BUTTON" and turn the "COVER" counter
  • Samsung SCP-3430HP | User Manual - Page 14
    in the figure below. SW606 (x100) SW605 (x10) SW604 (x1) Communication Protocol Setup Use pins #1~#4 of SW603 to specify the communication protocol. PIN Comp A B C D E ----H I J ------N O P Q ON A : SAMSUNG HALF B : SAMSUNG FULL 14_ installation & connection
  • Samsung SCP-3430HP | User Manual - Page 15
    ● installation & connection Baud Rate Setup Use pins #5, #6 of SW603 to set the baud rate. BAUD RATE 4800 BPS 9600 BPS 19200 BPS 38400 BPS The factory
  • Samsung SCP-3430HP | User Manual - Page 16
    installation & connection Controller Termination n < 32 Termination SW1-ON SW2-ON CAM 1 CAM 2 CAM n-1 CAM n M  A communication error may occur if you connect multiple cameras that are assigned the same address in the network. 16_ installation &
  • Samsung SCP-3430HP | User Manual - Page 17
    ● installation & connection Connecting WITH OTHER device MONITOR ALARM IN CONTROLLER/DVR ALARM OUT Connecting to a monitor 1. Connect one end of the BNC video cable connector to
  • Samsung SCP-3430HP | User Manual - Page 18
    the camera to the Tx+ pin of the controller. 2. Connect the Rx- pin of the camera to the Tx- pin of the controller. 3. Connect the Tx+ pin of the camera to the Rx+ pin of the controller. 4. Connect the Tx- pin of the camera to the Rx- pin of the controller. Rx Tx 18_ installation
  • Samsung SCP-3430HP | User Manual - Page 19
    Connecting the adaptor cable Adaptor Board ● installation & connection Power Supply Connect the cables as necessary, and turn on the camera to check if it works properly. 1. Connect the adaptor to the power terminal of the camera. 2. Plug the power cord of the adaptor into the wall outlet.
  • Samsung SCP-3430HP | User Manual - Page 20
    containing sub menu items. M  While any operation of PRESET, AUTO PAN, SCAN, and PATTERN is running, and if the camera is turned off and back on without any particular manipulation, the camera will resume the last run operation.  You can set the menu item only if the tilt angle is within 90
  • Samsung SCP-3430HP | User Manual - Page 21
    menu item, refer to "How to use the keyboard controller". (page 20)  PROFILE Select a mode appropriate to the camera installation environment.  CAMERA SET You can configure the camera settings.  INTELLIGENCE Offers motion detection and tracking functions.  PRIVACY ZONE  MAIN MENU  PROFILE
  • Samsung SCP-3430HP | User Manual - Page 22
    from the pre-determined configurations as appropriate to your specific camera installation environment. Your selection on each item in PROFILE will affect all other settings of the camera.  STANDARD Automatically optimizes the camera settings to the normal environment.  ITS This setting enables
  • Samsung SCP-3430HP | User Manual - Page 23
    ● setup CAMERA SETUP MENU STANDARD ITS BACKLIGHT DAY/NIGHT GAMING Parent Menu Sub-menus MOTION (F.FAST) --- (F.FAST) --- NORM (F.FAST) --- SLOW DNR MEDIUM MEDIUM MEDIUM MEDIUM MEDIUM SHUTTER
  • Samsung SCP-3430HP | User Manual - Page 24
    that displays on the screen. For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20) 1. Select - . 2. Use the joystick to select a desired character, then press [ENTER]. In the lower input box of the screen, the selected character
  • Samsung SCP-3430HP | User Manual - Page 25
    area. With AREA set to , you can specify the position and size. ALC LEVEL BACKLIGHT AREA [ 00] ----I---- BLC USER - WDR : If you set accordingly.  MANUAL : Adjust the iris level manually. M  The overall brightness target of a camera will be set to ALC level 0,
  • Samsung SCP-3430HP | User Manual - Page 26
    SET  CAMERA ID OFF VPS OFF IRIS ALC AGC (VERY HIGH) --- sensitivity. DNR MID If is set to , or mode, the menu will switch to SHUTTER SENS-UP FLICKERLESS OFF OFF OFF . XDR MID With the USER ( ) submenu selected, press [ENTER] to display the
  • Samsung SCP-3430HP | User Manual - Page 27
    moving object.  As long as SENSE UP is set to AUTO, FIXED / FLICKERLESS to ON / BACKLIGHT to WDR, the SHUTTER menu is not available.  CAMERA SET  CAMERA ID OFF VPS OFF IRIS ALC AGC (VERY HIGH) --- DNR MID SHUTTER 1/100 SENS-UP (OFF) --- FLICKERLESS (OFF) --- XDR MID SENS-UP
  • Samsung SCP-3430HP | User Manual - Page 28
    according to the scene. For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20) 1. Select - . 2. Select a screen transition mode according to the illumination, and set options as appropriate.  DAY : Fixed to DAY mode, regardless
  • Samsung SCP-3430HP | User Manual - Page 29
    ● setup  You can specify MASK 1 and 2 simultaneously.  If is set to , the MASK AREA function is not available.  EXT : The interface to an external alarm enables an automatic switch between DAY and NIGHT mode. If you set to EXT, and alarm #1 to NO/NC in ALARM SETALARM
  • Samsung SCP-3430HP | User Manual - Page 30
    specified recording mode, select a mode with necessary options.  ATW1,2 : The camera can automatically adjust the color temperature in real time, according to the ambient conditions. (Color blue color. - R-GAIN/B-GAIN : Specify the current color temperature manually. 30_ setup
  • Samsung SCP-3430HP | User Manual - Page 31
    ● setup FOCUS MODE You can select a focus mode according to the angle that you adjusted for camera recording. - AF : This will monitor the screen continuously to focus automatically. If you adjust the focus manually, that will operate the same as in . This will also restore focus after the
  • Samsung SCP-3430HP | User Manual - Page 32
    and horizontal distinction, respectively. V-SYNC You can set the V-SYNC mode. - If you select , the camera will use the internal synchronization. - If selecting , the camera will use an external power frequency for synchronization. The LL-PHASE can be adjusted as appropriate. AGC COLOR
  • Samsung SCP-3430HP | User Manual - Page 33
    the luminance, PIP will disappear if the SENSE UP menu is set to AUTO. DIS (Digital Image Stabilization) If you set it to for a camera that is trembled or vibrated from an ambient change, this will automatically compensate for the flicker on the screen. M  If you set to
  • Samsung SCP-3430HP | User Manual - Page 34
    You can detect motions and mark the video that contains such motion, and enables tracking of the movement. (The auto PTZ function is not supported for tracking an object.) Selecting the option will mark a region if an existing object disappears, or a new object appears and fixed for
  • Samsung SCP-3430HP | User Manual - Page 35
    of the zone and press [ENTER]. The Zone setup screen appears. 3. Select the and press [ENTER]. Using the joystick, adjust the camera's pan, tilt and zoom.  PRIVACY ZONE  1 2 3 4 7 8 9 10 PRIVACY SET STYLE 5 6 11 12 ON MOSAIC1 4. Select the . Select the pixel level
  • Samsung SCP-3430HP | User Manual - Page 36
    enable quicker and easier accessing and monitoring, which supports up to 512 presets. For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20) 1. Select -.  MAIN MENU  PROFILE CAMERA SET INTELLIGENCE PRIVACY ZONE PRESET AUTO SET ZONE
  • Samsung SCP-3430HP | User Manual - Page 37
    .  If you set the to , the video image will be held still until the camera reaches the preset position. 7. Set to . You can adjust camera setups for each CAMERA SET preset. IRIS ALC  For details on setting , WHITE BAL FOCUS MODE MF and
  • Samsung SCP-3430HP | User Manual - Page 38
    selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20) 1. Select -.  MAIN MENU  PROFILE CAMERA SET INTELLIGENCE PRIVACY ZONE PRESET AUTO SET ZONE SET ALARM SET CLOCK SET OTHER SET 2. Select the number of . AUTO PAN setup
  • Samsung SCP-3430HP | User Manual - Page 39
    at both positions.  SPEED : Sets the moving speed of the camera, from 1 to 64.  DWELL TIME : Sets the dwell time at the starting and ending positions, from 1 to 60 seconds. Pattern Setup You can manually record your pan/tilt/zoom movements to a monitoring pattern for up to 2 minutes
  • Samsung SCP-3430HP | User Manual - Page 40
    setup 4. Select the and move the camera using pan/tilt/zoom. 5. Your manual camera actions will be recorded for up to 2 minutes, and returns to the previous menu automatically.  To stop manual recording and return to the previous menu before 2 minutes, press [ENTER]. PATTERN SET 1 <
  • Samsung SCP-3430HP | User Manual - Page 41
    ● setup Auto Play Setup AUTO PLAY runs configured AUTO PAN, PATTERN, and SCAN functions automatically. For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20) 1. Select -. 2. Select the and select a number. AUTO PLAY
  • Samsung SCP-3430HP | User Manual - Page 42
    and saving each menu item, refer to "How to use the keyboard controller". (page 20) 1. Select -.  MAIN MENU  PROFILE CAMERA SET INTELLIGENCE PRIVACY ZONE PRESET AUTO SET ZONE SET ALARM SET CLOCK SET OTHER SET 2. Set to . 3. Set the north direction using the
  • Samsung SCP-3430HP | User Manual - Page 43
    and saving each menu item, refer to "How to use the keyboard controller". (page 20) 1. Select -.  MAIN MENU  PROFILE CAMERA SET INTELLIGENCE PRIVACY ZONE PRESET AUTO SET ZONE SET ALARM SET CLOCK SET OTHER SET 2. Select each item and set appropriately.  ALARM SET
  • Samsung SCP-3430HP | User Manual - Page 44
    to the corresponding alarm. Presets 1 ~ 8 are coupled with alarms 1 ~ 8 inputs respectively, and the preset 9 is coupled to the motion detection. The camera stops and remains in the corresponding preset position for the defined , and performs pattern or scan action defined by the
  • Samsung SCP-3430HP | User Manual - Page 45
    ● setup CLOCK SET Sets whether to display the clock on the screen and its time format. For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20) 1. Select -. 2. Select and set whether to display the time on the screen. 3.
  • Samsung SCP-3430HP | User Manual - Page 46
    all settings to the factory default settings by selecting the . However, the protocol, baud rate, address and the language settings will not be reset. M  display font. PROPORTIONAL P/T When selected , manual pan / tilt movement speed will vary proportionally to the zoom ratio. P/T
  • Samsung SCP-3430HP | User Manual - Page 47
    user of the camera. For protocol, baud rate and address settings will follow those settings of the adaptor switch.  PROTOCOL, BAUD RATE, ADDRESS : When selected , you can manually set the protocol, baud rate and address.  COMMUNICATION  RS485 PRIORITY PROTOCOL BAUD RATE ADDRESS HW SAMSUNG
  • Samsung SCP-3430HP | User Manual - Page 48
    controller". (page 20) 1. Select -. 2. The current system information is displayed.  SYSTEM INFO  TYPE PROTOCOL ADDRESS COMM. TYPE BAUD RATE SERIAL NO. CAMERA VER. ALARM VER. 4_PTZ_WDR_P SAMSUNG 0 HW, RS485, HALF 9600 000000000000000 v2.00_100501 v2.00_100501 48_ setup
  • Samsung SCP-3430HP | User Manual - Page 49
    ● appendix appendix Shortcut Keys Function DAY/NIGHT - DAY DAY/NIGHT - NIGHT DAY/NIGHT - AUTO DAY/NIGHT - EXT IRIS - ALC - BACKLIGHT - WDR CAMERA SET IRIS - ALC - BACKLIGHT - OFF IRIS - ALC IRIS - MANU FOCUS MODE - AF FOCUS MODE - MF FOCUS MODE - ONEAF AUX OUT CONTROL - OUT1 - ON AUX
  • Samsung SCP-3430HP | User Manual - Page 50
    Item Description Product Type Power Source Power Consumption TV Standard Image Sensor Effective Pixels TV line frequency Synchronization Resolution S/N Ratio SMART DOME CAMERA AC 24 V (60 Hz) 11W NTSC / PAL STANDARD COLOR SYSTEM ExView-HAD PS CCD PAL-752(H) × 582(V) NTSC-768(H) × 494(V) PAL
  • Samsung SCP-3430HP | User Manual - Page 51
    (Ø x H) Weight Product Color Description PAN range : 360˚Endless Preset Pan Speed : 600˚/sec, maximum Manual Pan Speed : 0.01˚~ 180˚/sec Tilt range : -6˚~186˚ Preset Tilt Speed : 600˚/sec, maximum Manual Tilt Speed : 0.01˚~ 180˚/sec RS485(Half&Full Duplex)/RS422, Data on Coaxial Cable Alarm Inputs
  • Samsung SCP-3430HP | User Manual - Page 52
    appendix Product Appearance 52_ appendix
  • Samsung SCP-3430HP | User Manual - Page 53
    product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be
  • Samsung SCP-3430HP | User Manual - Page 54
    R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com www
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
Smart Dome Camera
User Manual
SCP-3430(P)