Samsung SCX-3405FW User Manual (user Manual) (ver.1.0) (English) - Page 66

Basic faxing 4 Enter the destination fax number (see "Keypad letters and numbers" on page 223). 5 Press (Start) on the control panel. The machine starts to scan and send the fax to the destinations. • If you want to send a fax directly from your computer, use Samsung Network PC Fax (see "Sending a fax in the computer" on page 255). • When you want to cancel a fax job, press machine starts transmission. (Stop/Clear) before the • If you used the scanner glass, the machine shows the message asking to place another page. 1 Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 50). 2 Select (fax) on the control panel. 3 Adjust the resolution and the darkness to suit your fax needs (see "Adjusting the document settings" on page 67). 4 Press (On Hook Dial) on the control panel or lift the handset. 5 Enter a fax number using the number keypad on the control panel. 6 Press (Start) on the control panel when you hear a high-pitched fax signal from the remote fax machine. Sending a fax manually Perform the following to send a fax using panel. (On Hook Dial) on the control If your machine is a handset model, you can send a fax using the handset (see "Variety feature" on page 10). Sending a fax to multiple destinations You can use the multiple send feature, which allows you to send a fax to multiple locations. Originals are automatically stored in memory and sent to a remote station. After transmission, the originals are automatically erased from memory. You cannot send faxes with this feature if you chosen super fine as an option or if the fax is in color. 2. Menu Overview and Basic Setup 66